Halfdead14
SSC Member
- Total Posts : 973
- Reward points : 0
- Joined: 2009/07/17 21:31:10
- Status: offline
- Ribbons : 2
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:15:32
(permalink)
techmasterjoe Halfdead14 I'd love the guide, was thinking of building a 3d printer but this sounds a bit more fun, and it looks so good. and FAR more useful ok i will start digging up my dgm files i will make a guide step by step and post it on my site i might make a few mods to the disign so it can be made with avg tools as is now you really need a CnC to make it or i might make kits with the CnC parts pre-cut a lot of people seam to be getting in to CnC lately I wouldn't mind buying a kit. What's your site? I'll have to check it out.
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:23:12
(permalink)
that's a long ways off i need about a month to finish, code, and TEST the thing i only started 3 days ago my site is my user name lol but it's new and i have not really done much with it the kit is not the block that thing cost 130$ in copper alone it's just the super Brain controller i'm done with working on it for today i been working on it for 13hours now with out moving once
post edited by techmasterjoe - 2011/08/08 19:26:57
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:27:07
(permalink)
Ouch. Pricey copper lol. Well all copper is pricey really, I was more just saying. You said you could do GPU pots right? If so how much would one be? You can PM it to me if you want.
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:31:08
(permalink)
not much cheaper then others you see copper has gone up 39% in last 2 years i have copper to build one full set of gpu and cpu pots but that almost 40lbs of copper remember the finished product is 1/3rd what i start with i do get the copper back at some point after i take and exchange it for more blocks but it's a lot of work and my car died if anyone wants to chat live im on IRC 24X7X365 irc.rizon.net #techmasterjoe
post edited by techmasterjoe - 2011/08/08 19:35:50
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:37:24
(permalink)
Wow ouch. Sorry to hear about your car. I'll let you know if I'm gonna be looking for a pot.
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
Gratuitous
FTW Member
- Total Posts : 1109
- Reward points : 0
- Joined: 2011/03/16 04:30:23
- Location: California
- Status: offline
- Ribbons : 4
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:42:47
(permalink)
I want the first brain ![](https://forums.evga.com/upfiles/smiley/001_smile.gif) did the solid files open for you?
“I built a castle in the swamp and it sunk. I built a second castle and it sunk too. I built a third castle and it burned down and then sunk. But the fourth castle, Ahhhh! That one stood.” —Monty Python and the Holy Grail
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:45:27
(permalink)
give it about 2 more weeks the copper market is Crashing hard now with the way it look it may drop by 30% in the next 2 weeks yay Thanks Russia for dumping so much extra copper it crashed Yes they opened in AI i can finish porting them yes i have both on my rig AI and SW both are 100% real both are newest ver out
post edited by techmasterjoe - 2011/08/08 19:49:10
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Gratuitous
FTW Member
- Total Posts : 1109
- Reward points : 0
- Joined: 2011/03/16 04:30:23
- Location: California
- Status: offline
- Ribbons : 4
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 19:46:50
(permalink)
well thats good to hear:)
“I built a castle in the swamp and it sunk. I built a second castle and it sunk too. I built a third castle and it burned down and then sunk. But the fourth castle, Ahhhh! That one stood.” —Monty Python and the Holy Grail
|
Halfdead14
SSC Member
- Total Posts : 973
- Reward points : 0
- Joined: 2009/07/17 21:31:10
- Status: offline
- Ribbons : 2
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/08 20:40:27
(permalink)
techmasterjoe that's a long ways off i need about a month to finish, code, and TEST the thing i only started 3 days ago my site is my user name lol but it's new and i have not really done much with it the kit is not the block that thing cost 130$ in copper alone it's just the super Brain controller i'm done with working on it for today i been working on it for 13hours now with out moving once Was talking about the cnc not the TEC, but then again I wouldn't mind building one of those either,
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/09 10:00:29
(permalink)
i can cutout a small wood one about the size of my table top and give you a part list to build it it will rip most things like thin sheets of alu (max around 1/4") and wood up to 1.5" thick not very fast but with a total cost around 800$ to have have it running it's not bad. it can cut things like water blocks you just have to have a lot of power in your cutting head 1.5hp+ and it's slow each copper plate for the TEC cooler took 14 hours (i was cutting inside pocket with a 0.5mm bit to get them thin fins) plastics you can fly it cuts so fast it's a good way to build a case
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/09 10:06:49
(permalink)
techmasterjoe it can cut things like water blocks you just have to have a lot of power in your cutting head 1.5hp+ and it's slow each copper plate for the TEC cooler took 14 hours (i was cutting inside pocket with a 0.5mm bit to get them thin fins) plastics you can fly it cuts so fast it's a good way to build a case Holy crap. lol. That seems like a long time, but I guess doing fins and stuff would take a while. What do you do while it cuts? Do you watch or go do other things?
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/09 10:24:17
(permalink)
i went to sleep lol i put 3" of hard foam on all the walls to my garage and the wall to the house got a coat of DynoMatt i can't hear it after i shut the door and that's all that maters i do go and check on it from time to time. i have good dust collectors and a 6000CFM filter going when they run so it stays clean and i don't have to think about a dust explosion i don't have smoke alarms the dust sets them off but i do have CO & C02 alarms that will stop the CnC's and open the Garage Door with out me doing anything. (Arduinos rock) i have a home made sprinkler system in the Garage (copper lines with fire heads every 4 feet) my Garage is a 5 car but i don't think i can fit any cars (not that i have any) i had a 69 cobra replica with a 351 and a blower but sold it to pay all my med bills fighting Cancer Sold my SR-2 as well ( ![](https://forums.evga.com/upfiles/smiley/crying.gif) )
post edited by techmasterjoe - 2011/08/09 10:27:06
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:TEC's custom chiller
2011/08/09 10:39:06
(permalink)
That 3x3" Bosch rail isn't cheap. Been looking all over for it.
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/09 11:17:35
(permalink)
the TEC high amperage PWM board 5~48v 140A free air 200A with fan 240A with heat sink and fan 280A with 315A surge if added to water loop it's tiny 4.75in X 2.55in X 0.75 w/o heat sink it's 94.4~97.3% efficiency is nice and low heat per amp
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/09 11:36:56
(permalink)
Would you happen to be able to make LED controllers as well?
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/09 15:12:12
(permalink)
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Halfdead14
SSC Member
- Total Posts : 973
- Reward points : 0
- Joined: 2009/07/17 21:31:10
- Status: offline
- Ribbons : 2
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/10 04:49:25
(permalink)
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/10 07:37:18
(permalink)
ya i like LED'S even more then the next guy my room has 785 led's total now MAHAHAHAHAHA about 600ish in vid my HAF 932 has almost 150LED'S and my MM-U2-UFO duality has about 400LED'S all are computer controlled full color
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/10 08:12:03
(permalink)
That's sick. I might seriously have to hit you up for one of those setups. I'm not so much into timing them with music, as I am being able to change the color through software.
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/10 08:17:06
(permalink)
it's cool when your case works as a CPU load meter / blinks RED when a temp lvl is crossed lol
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
Gratuitous
FTW Member
- Total Posts : 1109
- Reward points : 0
- Joined: 2011/03/16 04:30:23
- Location: California
- Status: offline
- Ribbons : 4
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/17 15:30:52
(permalink)
hey Joe, any more progress on the tec controller? also, how did the thermals pan out on my blocks?
“I built a castle in the swamp and it sunk. I built a second castle and it sunk too. I built a third castle and it burned down and then sunk. But the fourth castle, Ahhhh! That one stood.” —Monty Python and the Holy Grail
|
Forgotton
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2011/04/13 03:14:25
- Location: California
- Status: offline
- Ribbons : 4
Re:TEC's custom chiller
2011/08/17 19:21:12
(permalink)
Ok, I'm in your irc chat i run 24/7 so I'll eventually respond if I'm not awake. however i rarely get to sleep anymore.
|
RBIEZE
CLASSIFIED Member
- Total Posts : 3072
- Reward points : 0
- Joined: 2007/02/21 00:13:33
- Location: Northern Illinois...lurking in the Corn
- Status: offline
- Ribbons : 12
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re:TEC's custom chiller
2011/08/18 00:54:39
(permalink)
Thanks for posting the pics of the Gantry setup ! Your ideas are now minez!!!! Lol ...kidding. I'm in the midst of designing another mill , thanks for posting up the pics and giving us a look at your approach.
They say opposites attract. I hope you meet someone who is good-looking, intelligent, and cultured. http://www.youtube.com/watch?v=W2WsPN-rr9o Evga X58 4Way sli,W'Cooled i7 950 @3.8, Mushkin redline mem @6-7-6-18 1600Mhz, 2-Evga GTX770 Sli, Evga Gtx460 Physx, Corsair Neutron 120GB SSD,Samsung 240SSD, W.D Black 640GB /Corsair TX950 Psu, Hanns-G 28" Lcd, Logitech G540 5.1 Surround My Affiliate Code: EECLVEDV7Z
|