I love that case! this will be an awesome little lan box for sure. Lian-Li sure does make some amazing cases. I'll never go back to any other brand for my primary. make sure you get some good build up shots! 

Very interesting, silver mod...
I will not to choose your components but you can think maybe on silver water block and water
cooling parts and tubes same color like some other details

Should be an interesting build. I'll try and keep an eye on your progress.

Been really enjoying Thanksgiving with family yesterday and black friday today. I decided not go out shopping for black friday, there's online store :). Today I started some work by cutting 140mm holes on front of case and then added MNPCTECH overkill "Ring" 140mm fan grill on it. 
Inside of case with beer.
Here's MNPCTECH Overkill "Ring" 140mm fan grill silver.
Put ring on the front case and mark circle for cut it off

Took front fan mount off from case
Put some car putty on each corner
Rough cut front cirle off and getting ready to smooth router for 140mm fan
Done with cutting and put MNPCTECH fan grill on to test it out.
Just got package from Swiftech today.
Full watercooling from swiftech!
Will start painting and some more work this weekend, also supposed to get all of hardware ready by this Tuesday!

 
Looking good so far.    

this is going to be nice!
 

Thats cool. Where did you get that? That has got to be the most portable case I seen for a LAN event.

Just out of curiosity, have you booted this thing up yet? There's an ongoing confusion/discussion as to whether or not you can run a dual GPU card on an ITX motherboard. Does it work?

Andrew_K

Just out of curiosity, have you booted this thing up yet? There's an ongoing confusion/discussion as to whether or not you can run a dual GPU card on an ITX motherboard. Does it work?

 
No I haven't test yet, will get stinger and cpu this Tuesday. It better be work, I dont see why it would not work. Dont scare me :)

Looking good man. After I complete my cosmos II project, I want to take on a small form factor. 

Finally back to modding project, been really busy lately. Last time I intended to complete it by 
November for Intel LanFest but then I realized there was no time :( Now this time I'm hoping to 
get it done by next weekend for PDXLAN.com.
Since it ran out of time and doesn't have time to modding for lanfest last November so I decided 
to buy LianLi itx benchmark system to test it out just for temporary and loving it! Here's some 
pictures of all hardware build up on benchmark system.
Here Lian Li itx benchmark system

Intel i5 3570k and GSkill 8gb 2x4gb 2400mhz arrived
eVGA GTX 690 backplate installed

It's all ready for lanfest!

At Intel Lanfest.

After I got home and decided to order evga cpu cooler to overclocking and play around with it.
I ran some test with 3dmark and 3dmark11, the score turned out pretty good for itx motherboard! So 
far I've pulled cpu to 4.7ghz with 1.22vcore but wouldn't let me oc ram to 1867 and 2133 so I 
decided to leave ram as default. Ram will work oc, seems like if I don't oc on cpu, looks like 
there's kind of bios issues. Guess I will have to wait for better bios. Here's 3dmark score 
results http://www.3dmark.com/fs/78173, and 3dmark11 score http://www.3dmark.com/3dm11/5840051. 
idle temp around 30, and load temp around 60 average but goes up to 90 while running 
intelburntest. It's pretty high temp, hopefully watercooling helps a lot!

Now it's time to get back to work on project for lan weekend!
Working on the side of case with carbon fiber vinyl and nvidia logo.
Working on 140mm fan.
Remove the washer on back of fan

Remove fan fin and now ready to cut it.

Cut 1/2 off the fan case.

Perfect fit!

Now working on resvoir add "GEFORCE GTX" logo on front of DD resvoir bay.
Wrinkle black spray on front resvoir.

Done with resvoir.
I got case back from powder coating and the front case, it looked so awful with melting on hole area from jb-weld! 
I've learn something better putty for powdercoat, they sugguest me get Hi-Temp Lab-Metal here
I had to order new front part!

But the overkill ring ended up looking good with wrinkle black.
After recieving the other front case back and it looks much better than before!
comparing to before powder coating.

some more pictures after powdercoating metallic.
Let's build all together!watercooling!Add GTX 690, it fits perfectly!

It's all ready to go for lan weekend!

Now I got the set ready but there's one more thing is small aluminum circle placing on middle front of 140mm fan as same as GTX 690's fan, would need to find one or make one.
Thanks for looking! I will post some more pictures at LAN.

Thats awesome.  It looks factory made.  Nice craftsmanship.

Some more picture from Mike Deal.

Nice mod- seen it on other forums as well.