EVGA

Hot!EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club

Page: < 12345.. > >> Showing page 3 of 13
Author
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 14:15:01 (permalink)
Folding (Core 22) Temperatures. Single Loop Duel Radiators (This Custom Loop is way to small.)
High 3.7 LPM
Low 2.1 LPM
 


$76.99 PMP-500 Pump, G 1/4 BSP   Part No.  PMP-500 Lower Right in above Image.
$66.99 Radiator, 2x120mm Fans, 54mm Thick, 30-FPI Copper   Part No.  HX-240XC
$89.99 CPU-400I Water Block (Intel Processor)   Part No.  CPU-400I
$48.99 Radiator, 1x120mm Fans,  54mm Thick, 30-FPI Copper   Part No.  HX-120XC
 Pump - 2x120mm Fans, 54mm Thick - KPE GPU - CPU-400I - 1x120mm Fans,  54mm back to Pump
Push/Pull $10.24  Fan, 120x38mm, 116CFM   Part No.  FAN-12038HBK Lower Duel Radiator
Push/Pull$9.74 Fan, 120x25mm, 108CFM   Part No.  FAN-12025HBK Upper Single  Radiator
post edited by bcavnaugh - 2019/06/11 15:50:17

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#61
sparetimepc
FTW Member
  • Total Posts : 1149
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: online
  • Ribbons : 11
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 14:18:20 (permalink)
Where is your chiller?

Click the bottom code for a 5% to 10% discount on your purchases. 

 

#62
Sajin
EVGA Forum Moderator
  • Total Posts : 40033
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 197
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 14:27:16 (permalink)
dwexpress
Where is your chiller?

+1

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#63
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 14:28:00 (permalink)
dwexpress
Where is your chiller?

On the Side Lines, I wanted to test the KPE HC Water Block without the Chiller.
And also see the Performance of a plan old custom water loop in different setups to maybe help others with their setups and what hardware they might want to go with.
 
Sajin
dwexpress Where is your chiller?

+1

I do not want you to feel left out
post edited by bcavnaugh - 2019/06/11 16:25:25

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#64
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 14:45:37 (permalink)
After all this Thread is now about any and all Cooling
Water/Chiller/Sub Zero Cooling Club

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#65
tt0ne
Superclocked Member
  • Total Posts : 106
  • Reward points : 0
  • Joined: 2009/02/23 19:16:24
  • Location: SoCal
  • Status: offline
  • Ribbons : 4
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 15:39:56 (permalink)
apologies if I contributed to hijacking your thread, man - I should've posted my comments somewhere else :-(

---

 
#66
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 15:43:45 (permalink)
tt0ne
apologies if I contributed to hijacking your thread, man - I should've posted my comments somewhere else :-(

As I posted before your Posts are fine here.
Look at it this way, look at my testing above showing performance or not.
Here are my FTW3 Cards 2 of them using the same Radiator, 3x120mm Fans, 54mm Thick, 30-FPI Copper and Pump
Note that the Top Card is the King on the Two.
One KPE under the Same Radiator, 3x120mm Fans, 54mm Thick, 30-FPI Copper and Pump

post edited by bcavnaugh - 2019/06/11 17:08:38

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#67
TwoEvilOne
iCX Member
  • Total Posts : 413
  • Reward points : 0
  • Joined: 2018/06/12 10:55:57
  • Location: NW Ohio
  • Status: offline
  • Ribbons : 2
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 16:38:41 (permalink)

My 3DMark HALL OF FAME high scores on Nvidia GeForce RTX EVGA 2080 Ti K|NGP|N Hybrid: Port Royal HOF 10856,
Time Spy v1.0 HOF 16961, Fire Strike Extreme v1.1 HOF 18976, Fire Strike Ultra v1.1 HOF 10049, Superposition v1.1 4K 14838;  Superposition v1.1 1080P Medium 30822; Superposition v1.1 1080P High 23905; Superposition v1.1 1080P Extreme 10802; Superposition v1.1 8K 6397.
<-- over here go to my Mods Rig in red, and +1 rate it and leave a comment and ill +1 you back, Thanks.
#68
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 16:43:07 (permalink)
Thanks TwoEvilOne,
The Thread Really is about any Water Cooling.
Any Custom Water Loop, Chiller, or Sub Zero Cooling Products.
I did add a brace for the GPU because the Tubing can pull the Card Down.

post edited by bcavnaugh - 2019/06/11 16:50:24

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#69
wwxww
iCX Member
  • Total Posts : 328
  • Reward points : 0
  • Joined: 2019/01/13 09:30:51
  • Location: New Orleans
  • Status: offline
  • Ribbons : 1
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 17:14:32 (permalink)
I really need to step it up and start opening boxes. I am way behind. The pc a/c room build is still just a thought still cause I am looking for houses. Still getting good performance from the clc. Can I just loop the 800 into itself to see if it works?
#70
808sting
Superclocked Member
  • Total Posts : 199
  • Reward points : 0
  • Joined: 2012/04/13 15:04:51
  • Location: US
  • Status: offline
  • Ribbons : 2
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 18:04:31 (permalink)
bcavnaugh
On the Side Lines, I wanted to test the KPE HC Water Block without the Chiller.
And also see the Performance of a plan old custom water loop in different setups to maybe help others with their setups and what hardware they might want to go with.
 

 
Thanks.      Your info with build parts really help.  The Koolance 120mmx38mm look similar to Delta or Panaflos.  I hated those since they are loud at 100%, but daily-use is not your intent I assume.  How does your HC with custom loop compare with the stock AIO in temp delta?
 
I'm trying to assess if the HC with a separate loop using thicker and/or triple rad is worth the investment for an all-around daily use.  I'm trying to avoid single loop since the KP can give off a ton of heat.  If I go external rads, I can add an aqua chiller later for fun.  The Koolance QD4s with adapters costs >$85/pair.  Custom MO-RA3 420 Pro with high volume pump or Koolance ERM-3K3UC around the same price.  The Koolance being the nice turn-key solution.  Both will end up >$1k not including chiller.  If the EXC-800 was variable speed, multi-stage, or cycled compressor, it would be more appealing.  At ambient -3 to 0, it wouldn't be running all the time, as loud, and not as much heat.  I remember my phase change gave off a lot of heat where I needed to run the central AC til the wife complained.  I eventually got a portable AC just for my room.

i7 5960X @ 4.625 Ghz, Asus X99 Deluxe II MB, 64GB G.Skill Trident Z DDR4-3200C13
EVGA 1080 Ti FE SLI (Using Hybrid Kits)
EKWB Predator 360 Push/Pull w/Raystorm waterblock
Corsair 900D Case w/custom fan setup
Samsung 950 Pro SSD 512GB, Samsung 850 Pro SSD 1GB, WB Black 6TB
Asus & LG BD-RE
Corsair AX1200i PS
Dell AW3418DW 34" (main), 2x Asus PG279 27" (sides)
#71
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 18:14:17 (permalink)
wwxww
I really need to step it up and start opening boxes. I am way behind. The pc a/c room build is still just a thought still cause I am looking for houses. Still getting good performance from the clc. Can I just loop the 800 into itself to see if it works?

You are getting just a little behind

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#72
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 18:15:29 (permalink)
808sting
bcavnaugh
On the Side Lines, I wanted to test the KPE HC Water Block without the Chiller.
And also see the Performance of a plan old custom water loop in different setups to maybe help others with their setups and what hardware they might want to go with.
 

Thanks.      Your info with build parts really help.  The Koolance 120mmx38mm look similar to Delta or Panaflos.  I hated those since they are loud at 100%, but daily-use is not your intent I assume.  How does your HC with custom loop compare with the stock AIO in temp delta?
 
I'm trying to assess if the HC with a separate loop using thicker and/or triple rad is worth the investment for an all-around daily use.  I'm trying to avoid single loop since the KP can give off a ton of heat.  If I go external rads, I can add an aqua chiller later for fun.  The Koolance QD4s with adapters costs >$85/pair.  Custom MO-RA3 420 Pro with high volume pump or Koolance ERM-3K3UC around the same price.  The Koolance being the nice turn-key solution.  Both will end up >$1k not including chiller.  If the EXC-800 was variable speed, multi-stage, or cycled compressor, it would be more appealing.  At ambient -3 to 0, it wouldn't be running all the time, as loud, and not as much heat.  I remember my phase change gave off a lot of heat where I needed to run the central AC til the wife complained.  I eventually got a portable AC just for my room.

You are very welcome and thank you.
Indeed as single Loop only for the KPE is the ONLY way to go.

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#73
tt0ne
Superclocked Member
  • Total Posts : 106
  • Reward points : 0
  • Joined: 2009/02/23 19:16:24
  • Location: SoCal
  • Status: offline
  • Ribbons : 4
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 18:16:26 (permalink)
bcavnaugh
 
Note that the Top Card is the King on the Two.
One KPE under the Same Radiator, 3x120mm Fans, 54mm Thick, 30-FPI Copper and Pump





Not sure it's a very good example. I mean, you have cut your flow rate in half with the SLI config and doubled your cooling requirements. It would be good to see just one FTW3 and then compare it to the Kingpin block. What am I missing?

---

 
#74
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 18:24:29 (permalink)
tt0ne
bcavnaugh
 Note that the Top Card is the King on the Two.
One KPE under the Same Radiator, 3x120mm Fans, 54mm Thick, 30-FPI Copper and Pump

Not sure it's a very good example. I mean, you have cut your flow rate in half with the SLI config and doubled your cooling requirements. It would be good to see just one FTW3 and then compare it to the Kingpin block. What am I missing?

Taking an SLI Setup apart is more work in an Custom Water Loop and is out of my scope and not worth it for me.
The test was to see how well the KPE HC Water Block did on a normal custom water loop on its own and in singe loop.
It was more for Testing for me and for other KPE Owner how well or not how well they cool.
Sorry I cannot take apart my FTW3 SLI Rig but it is a lot of work and not sure how it would help anyone in the shot or long run.
In the End I was really only testing with the KPE difference between my Chiller and a Normal Custom Water Loop.
Post #60 was where this started removing my Chiller.
Also I can set both setups with the Same Flow Rate as why above I have the Pump set to the max and to the lowest settings.
Look at MEM1 Temp on the FTW3 and how LOW it is.
post edited by bcavnaugh - 2019/06/11 18:33:08

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#75
tt0ne
Superclocked Member
  • Total Posts : 106
  • Reward points : 0
  • Joined: 2009/02/23 19:16:24
  • Location: SoCal
  • Status: offline
  • Ribbons : 4
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/11 18:45:03 (permalink)
No worries - I wouldn't take apart my SLI loop either :-)

---

 
#76
TwoEvilOne
iCX Member
  • Total Posts : 413
  • Reward points : 0
  • Joined: 2018/06/12 10:55:57
  • Location: NW Ohio
  • Status: offline
  • Ribbons : 2
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 00:35:36 (permalink)
Got my score up Bill,
https://www.3dmark.com/compare/pr/101402/pr/102347/pr/102230

 
post edited by TwoEvilOne - 2019/06/12 09:08:45

Attached Image(s)


My 3DMark HALL OF FAME high scores on Nvidia GeForce RTX EVGA 2080 Ti K|NGP|N Hybrid: Port Royal HOF 10856,
Time Spy v1.0 HOF 16961, Fire Strike Extreme v1.1 HOF 18976, Fire Strike Ultra v1.1 HOF 10049, Superposition v1.1 4K 14838;  Superposition v1.1 1080P Medium 30822; Superposition v1.1 1080P High 23905; Superposition v1.1 1080P Extreme 10802; Superposition v1.1 8K 6397.
<-- over here go to my Mods Rig in red, and +1 rate it and leave a comment and ill +1 you back, Thanks.
#77
TwoEvilOne
iCX Member
  • Total Posts : 413
  • Reward points : 0
  • Joined: 2018/06/12 10:55:57
  • Location: NW Ohio
  • Status: offline
  • Ribbons : 2
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 09:12:40 (permalink)

My 3DMark HALL OF FAME high scores on Nvidia GeForce RTX EVGA 2080 Ti K|NGP|N Hybrid: Port Royal HOF 10856,
Time Spy v1.0 HOF 16961, Fire Strike Extreme v1.1 HOF 18976, Fire Strike Ultra v1.1 HOF 10049, Superposition v1.1 4K 14838;  Superposition v1.1 1080P Medium 30822; Superposition v1.1 1080P High 23905; Superposition v1.1 1080P Extreme 10802; Superposition v1.1 8K 6397.
<-- over here go to my Mods Rig in red, and +1 rate it and leave a comment and ill +1 you back, Thanks.
#78
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 09:51:55 (permalink)
Well that is Not a KPE Graphics Card but I will let it slide this time.
This could also start to take the Thread back off topic and I really do not want to add the NVIDIA RTX Titan in this KPE Club.
post edited by bcavnaugh - 2019/06/12 10:38:37

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#79
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 11:24:40 (permalink)
I am believing that the KPE HC Water Block is doing an OK job at cooling under a standard Custom Water Loop.
Room is 25/24°C Coolant 30°C and Under Back Plate 33°C Coolant Flow 3.7 LPM Running Core 22 Custom Loop Info in Post #60
 
post edited by bcavnaugh - 2019/06/12 11:28:30

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#80
degenerate
Superclocked Member
  • Total Posts : 237
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 12:55:40 (permalink)
I'm not seeing a real reason to grab an HC block outside of noise reduction versus the Hybrid, unless you plan on running a chiller. Performance improvement at ambient appears to be negligible. Glad I didn't order an HC block on day-one.
 
Enjoy your cards, fella's! Keep up the good work.


#81
Deficatus
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2019/02/13 17:16:34
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 13:06:30 (permalink)
I just ordered an HC Block, but still need to get everything else(I use to be Air Cool for life before the Kingpin card). So I hope you're taking new members towards the end of the year.
#82
Zeddivile
SSC Member
  • Total Posts : 540
  • Reward points : 0
  • Joined: 2017/09/30 11:15:15
  • Location: @ the bottom of upper middle
  • Status: offline
  • Ribbons : 6
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 13:08:06 (permalink)
Aesthetics - subjective and a little better @ cooling the memory. If you already have custom loops it’s imo cleaner to put the HC in the loop. Also you get that OLED bracket which makes it easy to use with an ln2 pot.

"This stuff breaks my tiny often dehydrated and carb deprived hamster brain"
 

 

#83
wwxww
iCX Member
  • Total Posts : 328
  • Reward points : 0
  • Joined: 2019/01/13 09:30:51
  • Location: New Orleans
  • Status: offline
  • Ribbons : 1
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 14:58:10 (permalink)
bcav, I'm having some trouble with identifying all of your fitting on the Koolance website for the chiller to water block. I sent an email with no response yet and I'm trying to run this weekend. Any parts help for the bcavnaugh Series ECX-800 KingPin cooler would really save some confusion.
#84
Zeddivile
SSC Member
  • Total Posts : 540
  • Reward points : 0
  • Joined: 2017/09/30 11:15:15
  • Location: @ the bottom of upper middle
  • Status: offline
  • Ribbons : 6
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 15:15:12 (permalink)
Ordered the new T-Rex CPU LN2 pot from K|NGP|N cooling. Now I just need 1 more PSU and it will be go time.m I have a 850w G2 but don't think its enough power for this project... So I really like my 1300G2 that's already on the bench. Maybe just add 1 more?

"This stuff breaks my tiny often dehydrated and carb deprived hamster brain"
 

 

#85
wwxww
iCX Member
  • Total Posts : 328
  • Reward points : 0
  • Joined: 2019/01/13 09:30:51
  • Location: New Orleans
  • Status: offline
  • Ribbons : 1
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 15:23:48 (permalink)
I look forward to those results...you really are killing it. You working by yourself?
#86
Zeddivile
SSC Member
  • Total Posts : 540
  • Reward points : 0
  • Joined: 2017/09/30 11:15:15
  • Location: @ the bottom of upper middle
  • Status: offline
  • Ribbons : 6
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 16:38:34 (permalink)
Ya work by myself. I film and stream it all by my self as well. But this is not the place to talk about such things. Also obviously everyone here on the forum + K|NGP|N, T|N, LUUMI, Buildzoid, Joe (Bearded Hardware) and Steve @ GN all are great informational sources also the overclocking forums and HWBOT forum.
I would be more active on HWBOT but the site is terribly slow, and its brutal uploading scores to that place.
 
So I suppose I do the physical "work" solo but have everyone listed to thank for all the content and information shared. In that sense it is a collab effort.
 
 
I see I didn't make it on the Port Royal Compare link #feelsbad
 
https://www.3dmark.com/co...51/pr/102407/pr/102230
 
Sajin probably shouldn't be on there because A. he is too good at OC and B not a KPE but he was on the last list.
 
a little more complete list of us on the forum
post edited by Zeddivile - 2019/06/12 18:08:33

"This stuff breaks my tiny often dehydrated and carb deprived hamster brain"
 

 

#87
TwoEvilOne
iCX Member
  • Total Posts : 413
  • Reward points : 0
  • Joined: 2018/06/12 10:55:57
  • Location: NW Ohio
  • Status: offline
  • Ribbons : 2
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 17:37:52 (permalink)
Zeddivile
Ya work by myself. I film and stream it all by my self as well. But this is not the place to talk about such things. Also obviously everyone here on the forum + K|NGP|N, T|N, LUUMI, Buildzoid, Joe (Beared Hardware) and Steve @ GN all are great informational sources also the overclocking forums and HWBOT forum.
I would be more active on HWBOT but the site is terribly slow, and its brutal uploading scores to that place.
 
So I suppose I do the physical "work" solo but have everyone listed to thank for all the content and information shared. In that sense it is a collab effort.
 
 
I see I didn't make it on the Port Royal Compare link #feelsbad
 
https://www.3dmark.com/co...51/pr/102407/pr/102230
 
Sajin probably shouldn't be on there because A. he is too good at OC and B not a KPE but he was on the last list.
 
a little more complete list of us on the forum


@Zeddivile LOL my bad you should definitely be on that comparison list. 
Your just miles ahead of us all. Great Score! 

My 3DMark HALL OF FAME high scores on Nvidia GeForce RTX EVGA 2080 Ti K|NGP|N Hybrid: Port Royal HOF 10856,
Time Spy v1.0 HOF 16961, Fire Strike Extreme v1.1 HOF 18976, Fire Strike Ultra v1.1 HOF 10049, Superposition v1.1 4K 14838;  Superposition v1.1 1080P Medium 30822; Superposition v1.1 1080P High 23905; Superposition v1.1 1080P Extreme 10802; Superposition v1.1 8K 6397.
<-- over here go to my Mods Rig in red, and +1 rate it and leave a comment and ill +1 you back, Thanks.
#88
Zeddivile
SSC Member
  • Total Posts : 540
  • Reward points : 0
  • Joined: 2017/09/30 11:15:15
  • Location: @ the bottom of upper middle
  • Status: offline
  • Ribbons : 6
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 18:15:48 (permalink)
Ya I'm just playing. Y'all definitely caught and surpassed me with the CLC and I pretty much skipped over the HC for benching on account of the experience triggering my inner 2 year old. I am planning on spending some serious time on XOC with DARK KPE but with a vacation coinciding with a certain launch I might be delayed. Maybe I can convince wify to let me bench tomorrow.

"This stuff breaks my tiny often dehydrated and carb deprived hamster brain"
 

 

#89
bcavnaugh
The Crunchinator
  • Total Posts : 38110
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: EVGA RTX 2080 Ti K|NGP|N (HC Waterblock) Water/Chiller/Sub Zero Cooling Club 2019/06/12 18:47:11 (permalink)
wwxww
bcav, I'm having some trouble with identifying all of your fitting on the Koolance website for the chiller to water block. I sent an email with no response yet and I'm trying to run this weekend. Any parts help for the bcavnaugh Series ECX-800 KingPin cooler would really save some confusion.

Here is my list: (You do not have to use Quick Disconnects)
https://koolance.com/index.php?route=product/search&filter_name=QD3-MSG4
QD3 Male Quick Disconnect No-Spill Coupling, Male Threaded G 1/4 BSPP  QD3-MSG4 (5 Each 2 GPU 3 EXC)
QD3 Female Quick Disconnect No-Spill Coupling, Compression for 13mm x 19mm (1/2in x 3/4in)  QD3-FS13X19 (4 Each for the Tubing)
https://koolance.com/index.php?route=product/search&filter_name=QD3-FS13X19
https://koolance.com/tubing-clear-uv-reactive-pvc-13mm-x-19mm-1-2in-x-3-4in
Tubing, PVC Clear, Dia: 13mm x 19mm (1/2in x 3/4in), Ea: 305mm (1ft) (10-12 Feet)
I made 2 Each 3 Feet but Wished I made them 4 Feet.
3/4 in. x 6 ft. Rubber Self-Seal Pipe Wrap Insulation HD
I also Sealed the Seam with Clear Silicone II Only part that seems to get cold.
Fitting Single, *Black* Swiveling 90-Degree, G 1/4 BSPP Part No. ADT-DXG90-BK (2 GPU)
 
Reservoir capacity: 3 liters
The freezing point is -15°C (5°F).
Blue
$89.99 Koolance 702 Liquid Coolant, High-Performance, UV Blue, 5000ml (169 fl oz)   Part No.  LIQ-702BU-05L
Clear
$89.99 Koolance 702 Liquid Coolant, High-Performance, Colorless, 5000ml (169 fl oz)   Part No.  LIQ-702CL-05L
Electrically Insulative and Higher Freezing Point is -35°C (-31°F). (I may change to this in the Fall).
$119.99 Koolance 705 Liquid Coolant, Electrically Insulative, Colorless, 5000ml (169 fl oz)   Part No.  LIQ-705CL-05L
I do not use any of the other Colors.
 
If you go with the Bottles you will need at least 5 but for a full tank 6.
$14.99 Koolance 702 Liquid Coolant, High-Performance, UV Blue, 700ml (24 fl oz)   Part No.  LIQ-702BU-B
 
I am adding this as well
Coolant Temperature Sensor Plug, K-Type Thermocouple $17.99 But it is NOT Required.
post edited by bcavnaugh - 2019/06/12 19:35:22

Affiliate Code: E5L3CTGE12 & Associate Code: 9E88QK5L7811G3H


 
#90
Page: < 12345.. > >> Showing page 3 of 13
Jump to:
  • Back to Mobile