richiec77
Nice! I see you dove right in with going sub-ambient!
 
Straight Distilled Water can handle down to -2F if the water is constantly kept moving. Past that it'll start to freeze. So best to use a glycol mixture to prevent that. I see the Koolance is propylene glycol. Most likely food safe.

I would not call it Food Safe. (corrosion and biological inhibitors)
Manual - safety_data_sheet_koolance_liq-705.pdf  & Manual - safety_data_sheet_koolance_liq-702.pdf
 
Koolance 702 series coolant is used by many industries requiring a high performance, low-toxicity, reliable coolant with corrosion and biological inhibitors. A high quality coolant is extremely important for addressing dissimilar metals and biologic growth (bacterial and algae) long-term. Koolance liquids will not clog components and can typically be used for 2-3 years before replacement is recommended. (Coolant shelf life is 3 years.)
 
Koolance 705 series coolant is used by many industries requiring a low conductivity (3 microSiemens per centimeter), low-toxicity, reliable coolant with corrosion and biological inhibitors. A high quality coolant is extremely important for addressing dissimilar metals and biologic growth (bacterial and algae) long-term. Koolance liquids will not clog components and can typically be used for 2-3 years before replacement is recommended.
 

richiec77
Ah. Fair enough. 
 
Also just noticed Koolance is a South Korean company. Never knew that before.

 

Who We Are

Founded in 2000, Koolance is an ISO 9001 manufacturer of liquid cooling solutions. We specialize in low MOQ, custom-manufactured components and subassemblies for OEM/ODM, with emphasis on rapid development and production. Our U.S. and Korea locations also stock a variety of products, such as: cold plates, chillers, heat exchangers, fittings, and other types of liquid cooling systems.

Our Mission

We strive to provide exceptional performance, reliability, power savings, and significant noise reduction in thermal management solutions for our customers worldwide.

@wwxww Nice. Grat's on picking up a chiller.

Ordered another 1300G2 just for the RTX KPE. so 2600watts should be enough for this bench.
and obvs another

 Previously was monitoring the same circuit twice. Once with APC and then again with killawat. Now I will monitor each PSU with a killawat and total with the APC. SOunds fun

bcavnaugh
I just go what is shown on the UPS Units for the most part.

Ya but killawat can sit on a desk or be orientated for a camera frame. Idk about you but my apc is not fun to move and lives close to the ground.

Zeddivile
FSU single card HOF #9

https://www.3dmark.com/fs/19586261

3DMark 11 (Extreme) single card HOF #2

https://www.3dmark.com/fs/19586261

Superposition 1080p High - Single Card #1

https://benchmark.unigine...854daf9b9855a271fa1339

Are those scores one offs or can be repeatable?
 
Dude, remember when some one said they coming after you and your scores? lol
Beast.
 
 

Zeddivile
FSU single card HOF #9

https://www.3dmark.com/fs/19586261

3DMark 11 (Extreme) single card HOF #2

https://www.3dmark.com/fs/19586261

Superposition 1080p High - Single Card #1

https://benchmark.unigine...854daf9b9855a271fa1339

Well done! 

techjesse
Excellent thread, Congrats bcavnaugh  
Hopefully someday we'll see you running Ln2...

Thanks, maybe one day I will give LN2 a go.

Electrically Insulative and Higher Freezing Point is -35°C (-31°F). (Order on the way).
$119.99 Koolance 705 Liquid Coolant, Electrically Insulative, Colorless, 5000ml (169 fl oz)   Part No.  LIQ-705CL-05L

$84.99 Radiator, 3x120mm Fans, 54mm Thick, 30-FPI Copper   Part No.  HX-360XC GPU Cooler
$48.99 Radiator, 1x120mm Fans,  54mm Thick, 30-FPI Copper   Part No.  HX-120XC Pump Cooler
$66.99 Radiator, 2x120mm Fans, 54mm Thick, 30-FPI Copper   Part No.  HX-240XC CPU Cooler

bcavnaugh
Electrically Insulative and Higher Freezing Point is -35°C (-31°F). (Order on the way).
$119.99 Koolance 705 Liquid Coolant, Electrically Insulative, Colorless, 5000ml (169 fl oz)   Part No.  LIQ-705CL-05L

I think I will try this fluid out. Was going to get the blue -15c but its out of stock currently.
 
Thanks for the link

Zeddivile

bcavnaugh
Electrically Insulative and Higher Freezing Point is -35°C (-31°F). (Order on the way).
$119.99 Koolance 705 Liquid Coolant, Electrically Insulative, Colorless, 5000ml (169 fl oz)   Part No.  LIQ-705CL-05L

I think I will try this fluid out. Was going to get the blue -15c but its out of stock currently.
 
Thanks for the link

Yeah this is what I bought when I bought my chiller as well.

I have the Nemesis GTX in most of its variations. Highish FPI so you will want to pair the GTX rad's with push/pull and if feeling froggy the noctua nf-f12 ippc 3000 pwm. 1300rpm is the sweet spot with the Nemesis GTX btw.
 
Btw almost ready to get frosty again. This time the 9900K and the RTX KPE gets the treatment.
 
 

Just a little more prep to complete.
Don't worry not just art eraser. pretty much entire KPE and z390 Dark coated w/ Vaso
 

Yes of course all K|NGP|N hardware !

Zeddivile
I have the Nemesis GTX in most of its variations. Highish FPI so you will want to pair the GTX rad's with push/pull and if feeling froggy the noctua nf-f12 ippc 3000 pwm. 1300rpm is the sweet spot with the Nemesis GTX btw.
 
Btw almost ready to get frosty again. This time the 9900K and the RTX KPE gets the treatment.
 
 

Just a little more prep to complete.
Don't worry not just art eraser. pretty much entire KPE and z390 Dark coated w/ Vaso