EVGA

What are your GTX 980 Ti's ASIC qualities?

Page: < 12345.. > >> Showing page 5 of 6
Author
Post
Essentials Only Full Version
Chad r
Superclocked Member
  • Total Posts : 125
  • Reward points : 0
  • Joined: 2010/11/06 14:12:57
  • Status: offline
  • Ribbons : 2
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/15 14:32:57 (permalink)
Installed 2 Hydro Coppers today :
 
74.9 ASIC
82.7 ASIC
 


 
They boost to 1354 mhz outta the box
vcore on one is 1.187
other is           1.149
 
seems like I got some overclock potential :)
 

 
 
#121
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6916
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 76
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/15 18:53:01 (permalink)
Just got my second Gigabyte 980 Ti G1 in. ASIC of 77.3, boosts to 1380 out of the box. I haven't even tried to dial in the max overclock as I get 1501 MHz stable (1515 MHz boost) without even touching the voltage, and so I see no reason to!
#122
kampongkid
New Member
  • Total Posts : 28
  • Reward points : 0
  • Joined: 2015/07/31 16:35:18
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/15 19:55:55 (permalink)
61.5 on my Hybrid. A little bummed about it, but I've been so busy with work these past couple days i haven't had much of a chance to play with it yet.
#123
toyking22
FTW Member
  • Total Posts : 1169
  • Reward points : 0
  • Joined: 2010/04/08 21:57:46
  • Location: South Oregon Coast
  • Status: offline
  • Ribbons : 4
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/15 20:10:32 (permalink)
i got 2,, evga SC and a normal,,, the normal has better asic lol

first one = 64%
second= 69%

got them running 1380 with no vcore increase. havent played much more with them

though 3dmark shows them at 1277?? msi afterburner shows them at 1380,,
post edited by toyking22 - 2015/08/15 20:28:10

Cpu= I7-9700k
Cpu cooler= Nzxt Kraken x62
GPU= Evga Hybrid 2080 ti
Motherboard= Asus Prime Z390 a (dont recommend)
Ram=G.SKILL TridentZ RGB Series 16GB
Ssd/Hdd Samsung 970 pro 2T / Intel 660 1t
Monitor= Gigabyte M28U 144Hz 28" 4K
Power Supply= EVGA SuperNOVA 850 PQ 
#124
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/15 21:05:34 (permalink)
toyking22
i got 2,, evga SC and a normal,,, the normal has better asic lol

first one = 64%
second= 69%

got them running 1380 with no vcore increase. havent played much more with them

though 3dmark shows them at 1277?? msi afterburner shows them at 1380,,




 
You have to understnad, GPU-Z and 3D Mark will read their base clocks and boost clock before GPU Boost 2.0, so it will always be lower than you see in reality.


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#125
qube_gbg
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2015/08/16 14:53:50
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/16 16:32:57 (permalink)
My GTX 980Ti Classy  ASIC 76 max boost on air is 1560 core mem 2108 vince custom bios. Just installed EK-block on it report back when it is back in the loop again
#126
Djinn206
New Member
  • Total Posts : 36
  • Reward points : 0
  • Joined: 2012/10/20 04:34:08
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/16 22:56:12 (permalink)
qube_gbg
My GTX 980Ti Classy  ASIC 76 max boost on air is 1560 core mem 2108 vince custom bios. Just installed EK-block on it report back when it is back in the loop again


Do you have a link to this custom bios?
#127
iczerjones
New Member
  • Total Posts : 32
  • Reward points : 0
  • Joined: 2008/04/07 17:54:37
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/17 10:46:43 (permalink)
Vanilla 980Ti ACX 2.0 - 71.8%.  Just installed it last night, haven't played with the clocks yet. 

Xeon E3-1245v3 (relid) | Asus Z97-WS | 16GB Ballistix @1600 | EVGA GTX980Ti | Seasonic X-850 | Asus Xonar U7 | Samsung S34E790C 34" VA panel | custom loop
#128
maroderdachs
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2011/03/16 10:35:32
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/18 07:16:41 (permalink)
62.9% on stock 980ti ACX 2.0 here. I am just a little disappointed that I am under the "magic" 70% as I did pay a small fortune for it. I did expected better quality control from EVGA. Well, I suppose I can live with it, if it doesn't start crashing on me.
 
#129
charlievoviii
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2011/01/07 20:50:28
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/18 20:04:04 (permalink)
74.5% and 82%
#130
qube_gbg
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2015/08/16 14:53:50
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/19 00:53:43 (permalink)
 
Djinn206
qube_gbg
My GTX 980Ti Classy  ASIC 76 max boost on air is 1560 core mem 2108 vince custom bios. Just installed EK-block on it report back when it is back in the loop again


Do you have a link to this custom bios?


 
 

> > kingpincooling///EVGA GTX 980Ti CLASSIFIED Tools  in there you find the bios cant link 
 
post edited by qube_gbg - 2015/08/19 01:01:10
#131
Djinn206
New Member
  • Total Posts : 36
  • Reward points : 0
  • Joined: 2012/10/20 04:34:08
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/19 02:09:00 (permalink)
qube_gbg
 > > kingpincooling///EVGA GTX 980Ti CLASSIFIED Tools  in there you find the bios cant link

Thank you. Tried that already, but can't get anywhere near 1500 MHz on air with my Classy.
 
And for Witcher 3 everything above 1442 MHz on the Core gives me red circled artifacts in GPU-heavy areas, while in other games 1470 MHz is no problem.
#132
chiptouz
iCX Member
  • Total Posts : 435
  • Reward points : 0
  • Joined: 2007/02/10 08:19:42
  • Location: Lee's Summit, MO
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/19 17:12:09 (permalink)
Max stable on 3dmark for me is +257 gpu, +460 mem.  3dmark score of 16598.

System Specs: Intel i7-7700k @ 4.8ghz, Noctua NH-U14S, Asus ROG Max. IX Code, 16GB GSkill Trident Z RGB DDR4 3600, ASUS STRIX GTX 1080TI OC, ACER XB270HU, 1x Samsung 960 EVO M.2 NVMe SSD 240GB (OS), 1x SanDisk Extreme Pro 480gb SSD and 1x Intel 730 480gb SSD R0(Games), 1x WD GR Sata3 4.0tb (Programs and Media), 1x BL Sata3 6.0tb (Backups), EVGA 1000 P2, CoolerMaster hafX, Logitech G502,G910, Win10 64bit Home Premium. 
#133
scoggs
New Member
  • Total Posts : 24
  • Reward points : 0
  • Joined: 2009/01/16 10:28:35
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/25 18:05:15 (permalink)
66.0% for my SC and 76.5% for my ACX2.0+(non SC)

AMD 5900X
64GB G.SKILL TridentZ Neo @ 3600MHz
EVGA 3090 FTW3 Ultra
EVGA 1200W P2
LG C1 OLED 120Hz
#134
evh19781984
iCX Member
  • Total Posts : 268
  • Reward points : 0
  • Joined: 2012/09/23 09:57:03
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/25 18:51:24 (permalink)
BruteSangheili
jsarver101
From what I've read the whole asic = better chip really isn't all that true. Correct me if I'm wrong.



So...many...arguments :p. I've read quite a few heated discussions concerning ASIC and I believe it does indicate lower voltage requirements and therefore probably is a measure of overclocking potential, but I'm not an electronic engineer ;).


This ASIC thing is confusing me more than ever because my classy has a ASIC of 88.7
and i had to add voltage so i would not get black screens when gaming?
I did no manual overclock to the card,it is running at factory speeds so this is really confusing?
IF a high ASIC has better/higher voltage why do i have to boost mine +83mv in afterburner?
If i don't some games will go to a black screen with audio and i have to re-boot the tower
to get out of it.
 
#135
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 01:58:14 (permalink)
76.1% and 78.3%
#136
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 14:24:51 (permalink)
I just got my replacement 980 from MSI and it has an ASIC of 79.3, is that good? The other board has an ASIC of 79.0 and they both boost to 1500 MHz at +146 in MSI Afterburner with no voltage boost applied.
post edited by Zuhl3156 - 2015/08/26 15:05:48

 
 https://www.heatware.com/u/100032/to
#137
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 15:04:35 (permalink)
What do you use for testing if the OC is stable ? Heaven benchmark crashes on 2650x1440p extreme settings ... I lowered it down and starting from the bottom again with 25+ increase and keeping it running for 30 minutes .. I keep it at stock voltage.. should I increase it ?
post edited by mhijazi - 2015/08/26 15:06:39
#138
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 15:06:46 (permalink)
mhijazi
What do you use for testing if the OC is stable ? 


I just run Firestrike and 3DMark11.

 
 https://www.heatware.com/u/100032/to
#139
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 15:28:59 (permalink)
Did you test your OC with games ?! I want to find an overclock that will be stable for all benchies or games ... I had an over clock of 100+ which was fine for 3dmark and crashed in heaven benchmark...
 
No voltage increase .. Should I increase the voltage ?!
#140
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 15:35:32 (permalink)
You can try boosting the voltage if it isn't stable. I boosted my old board by .46v and my boost clock increased by 26 MHz. I haven't tried any voltage increase with this one yet but I expect the same results. My overall voltage under load was 1.237 and the max allowed according to the spec sheet is 1.250.

 
 https://www.heatware.com/u/100032/to
#141
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 15:39:14 (permalink)
I am at 50+ / 100+ so far and with no voltage increase and it seems stable. no crashes so far , 30-45 minutes run in Heaven benchmark. I am stepping core by +25 and memory by +50.
 
Do you use Precision X or another OC utility ? 
#142
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 15:59:13 (permalink)
I use MSI Afterburner 4.1.0 since it's more stable than PrecisionX 16. I don't like version 4.1.1 because I have too many problems with it but it's all that MSI has listed right now.
http://gaming.msi.com/features/afterburner
Uninstall PrecisionX first and reboot if you want to try it. If 4.1.1 gives you problems i can upload 4.1.0 for you.

 
 https://www.heatware.com/u/100032/to
#143
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 16:08:03 (permalink)
Yes. I know that Precision X has problems. No matter how vcore I add , and voltage , it was giving same results as stock voltages / cores. I was starting to think I had bad cards but when I tried MSI , I kew that Precision X was the problem.
 
I am on AB 4.1.1, If you can send me a link of 4.1.0 in private message, I will try it too. but what kind of problems are you facing with 4.1.1 ? Is it not stable ? does 4.1.0 allow you to reach higher stable clocks ? 
post edited by mhijazi - 2015/08/26 16:10:43
#144
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 16:17:21 (permalink)
I was getting 'DirectX Device Removed' errors for some reason. I never ask about these things at Guru3D forums since Unwinder comes unglued too easy.

 
 https://www.heatware.com/u/100032/to
#145
mhijazi
iCX Member
  • Total Posts : 343
  • Reward points : 0
  • Joined: 2010/10/12 02:12:46
  • Status: offline
  • Ribbons : 3
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/26 16:30:17 (permalink)
The hell that means  
#146
XrayMan
Insert Custom Title Here
  • Total Posts : 73000
  • Reward points : 0
  • Joined: 2006/12/14 22:10:06
  • Location: Santa Clarita, Ca.
  • Status: offline
  • Ribbons : 115
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/27 21:34:44 (permalink)
Zuhl3156
I was getting 'DirectX Device Removed' errors for some reason. I never ask about these things at Guru3D forums since Unwinder comes unglued too easy.




People attacking him (Unwinder) doesn't help either.

            My Affiliate Code: 8WEQVXMCJL
 
        Associate Code: VHKH33QN4W77V6A
 
             
 
 
                  
 
 
 
          
 
   
 
           
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 



 
 
 
 
 
 &nbsp
#147
Zuhl3156
Omnipotent Enthusiast
  • Total Posts : 13061
  • Reward points : 0
  • Joined: 2010/03/23 12:52:50
  • Location: Kidnapped by Gypsies
  • Status: offline
  • Ribbons : 34
Re: What are your GTX 980 Ti's ASIC qualities? 2015/08/28 03:55:32 (permalink)
XrayMan
Zuhl3156
I was getting 'DirectX Device Removed' errors for some reason. I never ask about these things at Guru3D forums since Unwinder comes unglued too easy.




People attacking him (Unwinder) doesn't help either.


Especially when it is a known problem listed in the release notes but nobody bothers to read them. Unwinder will answer your questions if you ask them in a professional manner and take the time to try to recreate the problem to help you with it. Ranting and criticizing his work doesn't help at all.

 
 https://www.heatware.com/u/100032/to
#148
dave980ti
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2015/09/06 07:16:37
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/09/06 12:18:57 (permalink)
Got my 980 ti classified at microcenter yesterday and gpu-z gives me an ASIC score of 77.8%
boost to over 1400mhz out of the box.
I love being able to see the gpu stats on my keyboards lcd. clock, temp, fan speed, mem usage, and fps.
very happy
#149
Muezick
iCX Member
  • Total Posts : 305
  • Reward points : 0
  • Joined: 2015/02/10 17:58:59
  • Status: offline
  • Ribbons : 0
Re: What are your GTX 980 Ti's ASIC qualities? 2015/09/11 19:39:22 (permalink)
71.7
#150
Page: < 12345.. > >> Showing page 5 of 6
Jump to:
  • Back to Mobile