EVGA

Okay lets hear it Highest Port Royal 3090 Kingpin Scores!

Page: << < ..1112131415.. > >> Showing page 11 of 37
Author
Post
Essentials Only Full Version
telehog
iCX Member
  • Total Posts : 413
  • Reward points : 0
  • Joined: 2018/12/05 13:48:52
  • Status: offline
  • Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 12:26:29 (permalink)
pat182
JonnyVee
pat182
i can confirm a 850watt psu ios not enough when you wanna oc the vram , getting hard shut down pass +1000 on mem :( 
 
strix on air with KPE bios : 14 862
 
 
NVIDIA GeForce RTX 3090 video card benchmark result - Intel Core i9-9900K Processor,ASUSTeK COMPUTER INC. PRIME Z390-A (3dmark.com)
 



I have Seasonic Focus Gold Plus 850w. I was able to hit 1200 on the memory without issue




yea well, i can say my psu doesnt cut it gonna switch to 1200watt after the holydays
 
im getting 560-580watts gpu power draw, + oc cpu + oc ram etc, my 850watt psu doesnt cut it


Watt meter on 1600 watt ti at wall with 10980xe and Kingpin pulling 975 watts +. With XOC vbios .
#301
telehog
iCX Member
  • Total Posts : 413
  • Reward points : 0
  • Joined: 2018/12/05 13:48:52
  • Status: offline
  • Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 12:31:36 (permalink)
johnksss
15728
https://www.3dmark.com/pr/702816

Great run looks like you struck Gold on Gpu and CPu .


#302
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 16:52:11 (permalink)
Is anyone adding NVVDD voltage to their GPU (beyond the max PX1 voltage slider) for daily gaming or are folks sticking to stock voltages for a daily driver?

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#303
SoldierRBT
Superclocked Member
  • Total Posts : 109
  • Reward points : 0
  • Joined: 2011/01/06 12:12:06
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 17:17:26 (permalink)
jspataro99
Is anyone adding NVVDD voltage to their GPU (beyond the max PX1 voltage slider) for daily gaming or are folks sticking to stock voltages for a daily driver?

 
For daily I'm using 0.950v 2100MHz +500 memory (it settled to around 2055-2070MHz when gaming). I found a NVVDD/MSVDD combination using Classified tool that provides good performance for 0.950v voltage point. I dropped memory to 1.35v (auto is 1.368-1.375v). When I get a waterblock, I'll push for better OC.
 
Maxing PX1 voltage slider doesn't really add more NVVDD voltage. It only unlocks up to 1.10v in the V/F curve. I think one of the reason why people are getting low score with high frequencies with the KPE is because the internal NVVDD/MSVVDD table for each voltage point is only good up to 450W. The internal clocks won't go higher even though the card is showing high frequencies like 2160MHz. 2100MHz avg internal clock +1100 Memory is enough to brake 15K in Port Royal.
 
I believe this may be the case with the FTW3 500W BIOS issue. They released a 500W BIOS with a NVVDD/MSVDD internal table of still 450W so it's hard to fully reach 500W with low NVVDD. 
post edited by SoldierRBT - 2020/12/28 17:20:20
#304
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 17:25:25 (permalink)
@SoldierRBT

Thanks! This is helpful and similar to what I’ve been seeing others doing, as well. This is also around where I’ve landed for daily gaming. I just wanted to make sure I was in the same ballpark as others for gaming, and 2055-2070 MHz is awesome for gaming IMHO.

Edit: I was gaming at a stable 2160 in COD Cold War tonight. I’ll take that.
post edited by jspataro99 - 2020/12/28 21:50:35

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#305
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 18:54:10 (permalink)
telehog
johnksss
15728
https://www.3dmark.com/pr/702816

Great run looks like you struck Gold on Gpu and CPu .




Maybe. I wish the vram was a bit better though.
 
 
Other news, I can game at about 2200 mhz on core in Cyberpunk 2077. Haven't tested Cold War or War Zone yet.

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#306
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 20:01:17 (permalink)
Finally joined the 15K club tonight.

15012

https://www.3dmark.com/pr/707606

Stock voltages just using PX1 and AIO in a closed case in my Gameroom. 20C ambient room temp. Max fans, PX1 power and voltage sliders all the way to the right. 9th overall score with a 9900KS. I am more than happy with that and not about to get greedy.

+125 GPU / +1200 MEM

After a ton of troubleshooting lower power draw, I realized that for some reason, PX1 won’t recognize my max power slider setting on restart, unless I lower the power slider, click Apply, then re-slide it back to 100, then click Apply again. This fix allowed me to do a run right after a cold boot to take advantage of a cooler system temp. I don’t think I’ll mess with the voltages or push it any further.

I bought this big boy for gaming after all, but it’s nice to know I can get above 15K with this chip and maybe even higher if I tried cooling things down more. Lower temps do make all the difference on this card, even if just doing a run after letting your PC cool down for a bit.
post edited by jspataro99 - 2020/12/28 20:22:04

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#307
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 21:52:55 (permalink)
johnksss
telehog
johnksss
15728
https://www.3dmark.com/pr/702816

Great run looks like you struck Gold on Gpu and CPu .




Maybe. I wish the vram was a bit better though.
 
 
Other news, I can game at about 2200 mhz on core in Cyberpunk 2077. Haven't tested Cold War or War Zone yet.


I’ve been able to game at 2160 MHz in COD Cold War using just the sliders in PX1 and no voltage adjustments. I’d imagine you should be able to do much better with your chip.

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#308
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/28 22:12:57 (permalink)
I always get a kick out of hearing that. No voltage adjustment. Generally not a reason on the "to buy a Kingpin card" list. Voltage and power control are the main reason to want this card. 
 
Stock voltage 2190. 
 
Edit:
After about 10 to 15 minutes it crashed. It kept hitting around 2200 which takes more voltage than stock.
 
 
post edited by johnksss - 2020/12/28 22:34:07

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#309
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 04:10:41 (permalink)
johnksss
I always get a kick out of hearing that. No voltage adjustment. Generally not a reason on the "to buy a Kingpin card" list. Voltage and power control are the main reason to want this card. 
 
Stock voltage 2190. 
 
Edit:
After about 10 to 15 minutes it crashed. It kept hitting around 2200 which takes more voltage than stock.
 
 


ROFL. I went through two 3090 FTW3 Ultras which each died on me after one day. So why would I stick with that lesser quality PCB? The Kingpin was the only option left for me if I wanted to stick with EVGA and have a card that actually works. Get all the facts before you judge someone’s buying intentions, bra.

Clearly it IS on the general list of reasons to buy the KPE if you’re “always getting a kick out of hearing it” from lots of other people who are also buying it for that same reason. 😂 You do realize that the card is called the “Kingpin Hybrid GAMING,” right? Guess EVGA also thought it might be used for gaming...

Oh and you didn’t buy the KPE for gaming? Obviously you did since you’re playing Cyberpunk at 2200 MHz. 🤣 Ya basic.
post edited by jspataro99 - 2020/12/29 04:35:23

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#310
kdjkdk
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2018/10/03 20:02:26
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 04:51:55 (permalink)
Guys, so x1 power slider I'm only getting 105 max on ln2 bios... nvidia smi shows max 449W too :/ that's not supposed to happen right? How do I fix this?
#311
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 04:53:55 (permalink)
kdjkdk
Guys, so x1 power slider I'm only getting 105 max on ln2 bios... nvidia smi shows max 449W too :/ that's not supposed to happen right? How do I fix this?


Take a look at my post one page back. You might need to use my slider and apply trick. Otherwise you may need to add some core voltage to your GPU. Good luck!
post edited by jspataro99 - 2020/12/29 05:00:56

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#312
JonnyVee
Superclocked Member
  • Total Posts : 167
  • Reward points : 0
  • Joined: 2019/07/23 21:20:39
  • Status: offline
  • Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 05:06:37 (permalink)
It’s a nice -15C this morning in my neck of the woods of The Great White North. With the PC getting a nice draft (wind is blowing the wrong way for strong outside air blowing in) I was finally able to hit 15k on stock voltages with +160 core, +1200 mem, power and fans at max. 
 
https://www.3dmark.com/pr/708964
 
With the classy tool I was able to get a little higher 15.145k for my highest yet (and #3 Leaderboard with a 5900x) but I think I’ll need a stronger draft and colder temps to see better. I also think I could have let it stabilize with the colder air a little longer.

https://www.3dmark.com/pr/708995
 
 
 
#313
kdjkdk
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2018/10/03 20:02:26
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 05:27:46 (permalink)
jspataro99
kdjkdk
Guys, so x1 power slider I'm only getting 105 max on ln2 bios... nvidia smi shows max 449W too :/ that's not supposed to happen right? How do I fix this?


Take a look at my post one page back. You might need to use my slider and apply trick. Otherwise you may need to add some core voltage to your GPU. Good luck!

I tried your suggestion, and not sure if it worked. Funny thing is, gpuz is actually saying my card is sometimes idling during port royal runs lol. That’s definitely not right.


Also it seems to indicate that I’m being power throttled when the tdp is at 111% ish?
post edited by kdjkdk - 2020/12/29 05:33:46
#314
kdjkdk
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2018/10/03 20:02:26
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 05:36:59 (permalink)
I’m getting even lower scores than before hmm... 14952 was my highest before but now same settings is getting me 14283... I’m stumped.
#315
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 05:44:40 (permalink)
kdjkdk
jspataro99
kdjkdk
Guys, so x1 power slider I'm only getting 105 max on ln2 bios... nvidia smi shows max 449W too :/ that's not supposed to happen right? How do I fix this?


Take a look at my post one page back. You might need to use my slider and apply trick. Otherwise you may need to add some core voltage to your GPU. Good luck!

I tried your suggestion, and not sure if it worked. Funny thing is, gpuz is actually saying my card is sometimes idling during port royal runs lol. That’s definitely not right.


Also it seems to indicate that I’m being power throttled when the tdp is at 111% ish?


Yeah I’m with you now. I’m trying again this morning and finding that my trick isn’t working anymore. I’m also seeing lower power draws again with the same settings as last night and as you have. I’m going to keep troubleshooting and I’ll report back if I find the culprit.

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#316
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 06:03:12 (permalink)
kdjkdk
I’m getting even lower scores than before hmm... 14952 was my highest before but now same settings is getting me 14283... I’m stumped.


So I honestly think it might have something to do with the way my antivirus software is behaving. I usually disable the McAfee scanner service before a run and I didn’t do that this morning and saw that my power draws were abysmal. I just went in and disabled it and I’m back up to my normal score range (albeit lower now since my PC is warm now). Anyways I wonder if that could affect power draw so severely.

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#317
kdjkdk
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2018/10/03 20:02:26
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 06:05:04 (permalink)
jspataro99
kdjkdk
jspataro99
kdjkdk
Guys, so x1 power slider I'm only getting 105 max on ln2 bios... nvidia smi shows max 449W too :/ that's not supposed to happen right? How do I fix this?


Take a look at my post one page back. You might need to use my slider and apply trick. Otherwise you may need to add some core voltage to your GPU. Good luck!

I tried your suggestion, and not sure if it worked. Funny thing is, gpuz is actually saying my card is sometimes idling during port royal runs lol. That’s definitely not right.


Also it seems to indicate that I’m being power throttled when the tdp is at 111% ish?


Yeah I’m with you now. I’m trying again this morning and finding that my trick isn’t working anymore. I’m also seeing lower power draws again with the same settings as last night and as you have. I’m going to keep troubleshooting and I’ll report back if I find the culprit.


I think x1 might be the culprit. Tried with afterburner same settings and got 14997. Honestly have no idea what exactly x1 is messing up, but oh well.
#318
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 06:45:49 (permalink)
@kdjkdk

That’s interesting and it makes sense. I’m getting increasingly skeptical of PX1 and its glitches and I may try Afterburner as well. I’ll see if that makes any difference for me and report back. Thanks for the update!

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#319
kdjkdk
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2018/10/03 20:02:26
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 07:10:24 (permalink)
Finally hit 15071 with +165/1200

It’s not stable though, so just for benchmarks I guess lol
#320
kdjkdk
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2018/10/03 20:02:26
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 07:14:16 (permalink)
15108 now. +165/1200 voltage slider maxed fan speed 100% no classified tweaks https://imgur.com/a/hVLlvN4
#321
cnez0528
New Member
  • Total Posts : 47
  • Reward points : 0
  • Joined: 2020/01/24 08:50:27
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 07:26:44 (permalink)
anyone know which email I'd need to email vince to get the xoc bios? The one sajin mentioned, I couldn't find
#322
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 08:05:25 (permalink)
Nice! I can’t wait to see what mine can do using Afterburner.

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#323
Zeddivile
SSC Member
  • Total Posts : 761
  • Reward points : 0
  • Joined: 2017/09/30 11:15:15
  • Location: @ the tipity top of FPS mountain
  • Status: offline
  • Ribbons : 7
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 10:28:06 (permalink)
here is a lowly 17100+ Port Royal score I dug up from a 3Dmark auto save
 
https://www.3dmark.com/3dm/55749348
 
 
 

"This stuff breaks my tiny often dehydrated and carb deprived hamster brain" -2019
  

 

#324
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 10:33:43 (permalink)
Zeddivile
here is a lowly 17100+ Port Royal score I dug up from a 3Dmark auto save
 
https://www.3dmark.com/3dm/55749348
 
 
 


Lowly score huh.... As LN2 goes....:D
 
Still, nice score Brother!

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#325
Zeddivile
SSC Member
  • Total Posts : 761
  • Reward points : 0
  • Joined: 2017/09/30 11:15:15
  • Location: @ the tipity top of FPS mountain
  • Status: offline
  • Ribbons : 7
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 10:37:46 (permalink)
johnksss
Zeddivile
here is a lowly 17100+ Port Royal score I dug up from a 3Dmark auto save
 
https://www.3dmark.com/3dm/55749348
 
 
 


Lowly score huh.... As LN2 goes....:D
 
Still, nice score Brother!


True. Thx, Grats on your new KPE! 
 
BTW These K|NGP|Ns are just what the doctor ordered & these cards have a much longer legs than some have stated thus far...

"This stuff breaks my tiny often dehydrated and carb deprived hamster brain" -2019
  

 

#326
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 11:25:30 (permalink)
Zeddivile
johnksss
Zeddivile
here is a lowly 17100+ Port Royal score I dug up from a 3Dmark auto save
 
https://www.3dmark.com/3dm/55749348
 
 
 


Lowly score huh.... As LN2 goes....:D
 
Still, nice score Brother!


True. Thx, Grats on your new KPE! 
 
BTW These K|NGP|Ns are just what the doctor ordered & these cards have a much longer legs than some have stated thus far...


So far I think I like this one better than my 2080 TI version. I think mine was not so great of an overclocker at the time.
telehog
johnksss
15728
https://www.3dmark.com/pr/702816

Great run looks like you struck Gold on Gpu and CPu .




Thanks Sir!



MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
#327
jspataro99
iCX Member
  • Total Posts : 378
  • Reward points : 0
  • Joined: 2018/01/09 17:03:03
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 11:34:17 (permalink)
My goodness does using Afterburner make all the difference on this card. I’m up to 15,102 for the 7th overall score on a 9900KS stock voltage max fans no classified tool in a closed case. +145 / +1200

https://www.3dmark.com/pr/710647

Seeing temp limit spikes now so I’m going to stop while I’m ahead.

But yeah. RIP Precision X1 ☹️
post edited by jspataro99 - 2020/12/29 11:39:38

CPU: Intel 19-12900K
Cooling: NZXT Kraken x62 (Push/Pull)
Motherboard: Gigabyte Z690 Aorus Master
GPU: 1x EVGA RTX 3090 K|NGP|N Hybrid
RAM: 4x 16GB Corsair Vengeance DDR5 5600 MHz
RAM Cooling: Corsair Dominator Platinum Airflow RGB 
SSDs (NVME): 1x WD Black SN770 2TB / 2x Samsung 970 EVO Plus 1TB / 1x Samsung 970 EVO Plus 500GB
SSDs (SATA): 1x Crucial MX300 1TB /  1x WD Blue 1TB / 1x WD Green 240GB
HDD: 1x WD Blue 2TB 5400 RPM
Case: Phanteks P600S
PSU: EVGA G2 1300W 80+ Gold Fully Modular
Monitor (Main): Sony BRAVIA 75" 4K TV (XBR75X900E) (60 Hz)
Monitor (2nd): Acer Nitro 34” Curved Ultrawide 3400x2160 (XZ342CK) (144 Hz)
#328
telehog
iCX Member
  • Total Posts : 413
  • Reward points : 0
  • Joined: 2018/12/05 13:48:52
  • Status: offline
  • Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 12:29:02 (permalink)
johnksss
Zeddivile
here is a lowly 17100+ Port Royal score I dug up from a 3Dmark auto save
 
https://www.3dmark.com/3dm/55749348
 
 
 


Lowly score huh.... As LN2 goes....:D
 
Still, nice score Brother!


Great score: Zeddivile ! How cold was the card running and do you think you can push it some more.
#329
kris1111
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2018/09/07 19:43:42
  • Status: offline
  • Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores! 2020/12/29 12:58:33 (permalink)
Not exactly KP score, but anyone noticed that the last record score from Escapeee (over 18500) was removed? 
#330
Page: << < ..1112131415.. > >> Showing page 11 of 37
Jump to:
  • Back to Mobile