Card back in intel machine with ducted AC. Gained a little. Wish I had a better binned card.
Maybe a few more points to be had with increasing MEM voltage (never touched it yet).
 
15644
 
https://www.3dmark.com/pr/756251
 
 
 
 

bumfoto
https://www.3dmark.com/pr/757347

My new best score 15735

Very nice 👍 excellent 👌 scores for the both of you.

Hello, First post for me. I could use some help getting into the 15000's.
 
After about 10-12 hours over the course of 3 days of overclocking the rig I seem to be hitting a wall. I cant get past 125+ core clock and 1300+ memory clock with LN2 Bios. I have not used the classified tool and dont know what it is. 
 
5950x (stock clock) | Asus Dark Hero | Trident Royal 4000mhz (cant hit 4000 yet so 3600mhz 16-16-16-36 @ 1.4v)

Kingpin 3090 - Highest score is a 14728 with LN2 Bios - Windows 10 64bit pro - 1920x1080 - Single Monitor - Everything closed in system tray - Nvidia Drivers 461.09 - MSI AB 4.6.3 Beta - I also have my window open - 40 degree outside - small 7" fan blowing on my kingpin radiator - Radiator in a push @ 100% fan speed - I've seen temps in AB get to 10 degree before starting. 
 

 
Here i will link other scores. Usually anything over 125+ on the core clock it just fails 75% of the time. Very rarely can i get one off but they always have lower scores. Multiple restarts and adjusting settings. 

 

 

 

 

I have had a new high score with messing around. I did notice the 111 on the power. I put it to max 120. I also was able to get 50 more out of the memory. 1350mhz is max. It crashes at 1400mhz. 
 
14880  +120 core +1350 Memory

 
Once I increase the GPU core clock to 135 it will do around 1m 20s of the Port Royal. It seems to crash as soon as the GPU core clock tries to hit 2200mhz. It will hold 2175mhz and 2190mhz throughout the test but crash as soon as it goes up one tick to 2200mhz. 

A little bit more, Card does a bit better than I thought, Core drop as I am hitting power limit now with LN2 bios.
I removed the duct to rad and just let the the AC blow in the direction of the entire system.
 
15780
 
https://www.3dmark.com/pr/776038
 

telehog
New score : SLI Kingpin & Ultra  29631 http://www.3dmark.com/pr/778825

Excellent score, well done 👍👍 👍 HOF Port Royal top 10.

so im hearing resizable bar will require a vbios update.
Thats very unfortunate for those using the 1000w bios. You will be forced to choose between 520w + RB or 1000w

headbasha
14914 seems to be the peak of my card or my ability. This is with outside temp of 30F. Anything over 140+ core would just have diminishing returns no matter the NVVDD FBVDD MSVDD sliders positioning. Same with Mem+. 

It seems ambient temp inside my house which is around 70 i am limited to 120 Core and 1300 Mem. I get a bin or two outside with temps it seems. 

Anyone care to validate me results and conclusion? 

What VBIOS are you using?  What's limiting in your runs, voltage or power?

I've been looking around in the forums but can't seem to find an answer but does the classified tool void your warranty?

What app do you use? Afterburner or Precision x1?

Great Score！

Was thinking of trying the XOC bios.
 
I was wondering if anyone who has ran both, were you able to achieve your base LN2 score with the XOC?
I seem to remember with the 2080TI KP that base scores were a bit lower because the XOC loosened memory timings?
 
 

emmett
Was thinking of trying the XOC bios.
 
I was wondering if anyone who has ran both, were you able to achieve your base LN2 score with the XOC?
I seem to remember with the 2080TI KP that base scores were a bit lower because the XOC loosened memory timings?
 
 

Good question, as I recall some variation across different BIOS with my 2080 Ti.

You can go to TechPowerUp, 1000W BIOS is on it.

Nikos4Life
Hi everyone!

I am new to overclocking with a KP card, currently using LN2 BIOS to run some test. Would anyone mind to give me some advice to get the most of this card?

Have to ask Vince for XOC BIOS (a.k.a BIOS 1000W) through email, right?

AFAIK there is a tool called Classified Tools, which allows user to control voltages and other parameters, where could I find latest version of this tool?

After that, Should I use Precision X1 to control clocks?

I came from overclocking a Titan Xp for a while, and I used MSI AfterBurner to change frequency curve, so would like to learn how to do this in PX1.
At the moment, I ran 3DMark Fire Strike and could not get pass 470W (520W BIOS), MEM = ~11000MHZ, Core= 2150-2160

Is this what should I expect?

I will buy Port Royal today so I will provide more info.

Best,
Nikos / Miguel

Installed my card last night, and with minimal tinkering got to 15,216 at 2190/1394. PC was in the window when outside temps were 29F (~ -2C). The plan is to dial things in this weekend when it will be much colder. Edit: ln2 bios, no classified.