Sajin
EVGA Forum Moderator
- Total Posts : 49181
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/05 15:33:44
(permalink)
Cool GTX I'm hoping you keep updating your test drive, will be interesting to see a monthly update to see if it lasts 1 year or more
I’ll post monthly updates.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49181
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
|
kacan22
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2017/07/13 20:36:08
- Location: Europe
- Status: offline
- Ribbons : 2
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31051
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/06 05:10:56
(permalink)
Anyone tried the Honeywell PCM Past yet? PTM7900 Series Datasheets & Reports PTM7950 SP Super Highly Thermally Conductive PCM Paste or PTM7958 SP Super Highly Thermally Conductive PCM Paste - Honeywell PTM7958-SP is an optimized version of Honeywell PTM7950-SP with even better performance.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31051
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/06 05:43:48
(permalink)
donta1979
Cool GTX Where is everyone ordering PTM7950 from? Seems to be some quality issues or knockoff/counterfeit product out there, that some people have reported on other forum's posts The results look very good for the PTM7950, I just want to get it from a reliable vendor
MODDIY if you want an authentic one that performs better than some of the pre packaged knockoffs of Amazon. There are legit ones on Amazon but I wanted to ensure I got the real thing.
Maybe, if 4 other people wanted to join me & buy some in bulk as a group, say everyone buys 10 --> there seems to be a big discount @ Qt of 50. I do not "need" ( 10) 80mm X 80mm pads - but @ that price, why not I would have to call PPCs & find out what is possible, as online inventory is not showing that many available to order currently. Over on PPCs ---> MODDIY is selling their productHoneywell PTM7950 SP Super Highly Thermally Conductive PCM Pad 80mm X 40mm = $26.29 ea .......... Buy 50 for $19.50 each and save 26% 80mm X 80mm = $48.58 ea ......... Buy 50 for $19.50 each and save 60%
|
oldfresh
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2021/11/03 17:30:23
- Location: USA
- Status: offline
- Ribbons : 0
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/08 08:24:58
(permalink)
To try and save you a bit of sanity @Cool GTX, I am running both of these in my 13900K (PCM-1) and 14900KS (PTM7950) builds, and they seem to function exactly the same as any type of "authentic" PTM 7950. In fact, achieving much higher OC stability than previously, better temps by about ~5C across the board under load and similar voltage settings as my previous settings with PK-3, which was crashing quite constantly under load with OC clocks. Huge improvement in thermals and OC stability with these, can confirm since I've tested both: PTM7950 80x80x0.2mm Phase Change GPU Thermal Pad https://www.newegg.com/p/2MB-001F-00072?Item=9SIA4REK368786UPSIREN PCM-1 Thermal Grease Replacement PCM Pad https://www.newegg.com/p/2MB-00B8-00010
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31051
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/08 09:32:31
(permalink)
oldfresh To try and save you a bit of sanity @Cool GTX, I am running both of these in my 13900K (PCM-1) and 14900KS (PTM7950) builds, and they seem to function exactly the same as any type of "authentic" PTM 7950. In fact, achieving much higher OC stability than previously, better temps by about ~5C across the board under load and similar voltage settings as my previous settings with PK-3, which was crashing quite constantly under load with OC clocks. Huge improvement in thermals and OC stability with these, can confirm since I've tested both: PTM7950 80x80x0.2mm Phase Change GPU Thermal Pad https://www.newegg.com/p/2MB-001F-00072?Item=9SIA4REK368786 UPSIREN PCM-1 Thermal Grease Replacement PCM Pad https://www.newegg.com/p/2MB-00B8-00010
Thanks for the information
|
donta1979
Primarch
- Total Posts : 15892
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 72
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/14 22:50:45
(permalink)
Just because I can now
Heatware Retired from AAA Game Industry Jeep Wranglers, English Bulldog Rescue USAF, USANG, US ARMY Combat Veteran My Build Intel Core I9 13900K@6.1ghz, ASUS ROG Ryujin III 360 ARGB, 32gb G.Skill Trident Z5 RGB 7200mhz CL34 DDR5, ASUS Rog Strix Z790-E, ASUS Rog Strix OC 4090, ASUS ROG Wingwall Graphics Card Holder, Seagate limited Edition Cyberpunk 2077 m.2, 2x Samsung 980 m.2 1TB's, 980 & 990 Pro m.2 2TB's, ASUS ROG Hyperion GR701, ASUS ROG Thor 1200W Platinum II, Cablemod RT-Series Pro ModMesh Sleeved 12VHPWR Carbon, ASUS Rog Swift PG35VQ 35", Acer EI342CKR Pbmiippx 34", ROG Harpe Ace Aim Lab Edition mouse, Rog Claymore II keyboard, TCL home entertainment Sound Bar w/Wireless Sub, Steelseries Johnny Silverhand Headset Microsoft Cyberpunk 2077 Xbox controller
|
Sajin
EVGA Forum Moderator
- Total Posts : 49181
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/14 23:07:40
(permalink)
|
donta1979
Primarch
- Total Posts : 15892
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 72
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/15 10:57:13
(permalink)
Sajin
Sadly the card needs more power to maintain it and oc the crap out of my vram lol no artifacts, it finished but yeah it needs to be volt modded.
Heatware Retired from AAA Game Industry Jeep Wranglers, English Bulldog Rescue USAF, USANG, US ARMY Combat Veteran My Build Intel Core I9 13900K@6.1ghz, ASUS ROG Ryujin III 360 ARGB, 32gb G.Skill Trident Z5 RGB 7200mhz CL34 DDR5, ASUS Rog Strix Z790-E, ASUS Rog Strix OC 4090, ASUS ROG Wingwall Graphics Card Holder, Seagate limited Edition Cyberpunk 2077 m.2, 2x Samsung 980 m.2 1TB's, 980 & 990 Pro m.2 2TB's, ASUS ROG Hyperion GR701, ASUS ROG Thor 1200W Platinum II, Cablemod RT-Series Pro ModMesh Sleeved 12VHPWR Carbon, ASUS Rog Swift PG35VQ 35", Acer EI342CKR Pbmiippx 34", ROG Harpe Ace Aim Lab Edition mouse, Rog Claymore II keyboard, TCL home entertainment Sound Bar w/Wireless Sub, Steelseries Johnny Silverhand Headset Microsoft Cyberpunk 2077 Xbox controller
|
yoadknux
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2020/12/10 13:44:30
- Status: offline
- Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/26 23:43:44
(permalink)
I also tried PTM7950 on my TUF 4090. After one week, I would say the core temperature didn't drop compared to high quality pastes, but the hotspot did. And it seems to only get better over time rather than get worse which it did with 3 high quality pastes that I tried. Highly recommended.
|
donta1979
Primarch
- Total Posts : 15892
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 72
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/27 11:35:13
(permalink)
yoadknux I also tried PTM7950 on my TUF 4090. After one week, I would say the core temperature didn't drop compared to high quality pastes, but the hotspot did. And it seems to only get better over time rather than get worse which it did with 3 high quality pastes that I tried. Highly recommended.
It will take some time to see the full results, I went from 28-32c idle to 72c at full load with cyberpunk fully maxed out with the hot spot hitting 82c and that was with an aggressive fan curve. This is after a year of ownership as things slowly heated up. With the pad installed and cured. Went down to 25c idle, a max temp of 57c and the hot spot not exceeding 67.1c. Once I yeeted my overclocks as you see above the Honeywell PTM7950 pad cured rather quickly and temps got better all around.
Heatware Retired from AAA Game Industry Jeep Wranglers, English Bulldog Rescue USAF, USANG, US ARMY Combat Veteran My Build Intel Core I9 13900K@6.1ghz, ASUS ROG Ryujin III 360 ARGB, 32gb G.Skill Trident Z5 RGB 7200mhz CL34 DDR5, ASUS Rog Strix Z790-E, ASUS Rog Strix OC 4090, ASUS ROG Wingwall Graphics Card Holder, Seagate limited Edition Cyberpunk 2077 m.2, 2x Samsung 980 m.2 1TB's, 980 & 990 Pro m.2 2TB's, ASUS ROG Hyperion GR701, ASUS ROG Thor 1200W Platinum II, Cablemod RT-Series Pro ModMesh Sleeved 12VHPWR Carbon, ASUS Rog Swift PG35VQ 35", Acer EI342CKR Pbmiippx 34", ROG Harpe Ace Aim Lab Edition mouse, Rog Claymore II keyboard, TCL home entertainment Sound Bar w/Wireless Sub, Steelseries Johnny Silverhand Headset Microsoft Cyberpunk 2077 Xbox controller
|
Sajin
EVGA Forum Moderator
- Total Posts : 49181
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/01 01:47:27
(permalink)
New month. So here is the update on my temps... Temps are still doing great.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102438
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/01 02:04:37
(permalink)
Sajin New month. So here is the update on my temps... Temps are still doing great.
Outstanding
|
flyinion
CLASSIFIED Member
- Total Posts : 2277
- Reward points : 0
- Joined: 2007/03/27 12:17:04
- Location: California
- Status: online
- Ribbons : 8
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/01 13:50:24
(permalink)
Sajin New month. So here is the update on my temps... Temps are still doing great.
Good to hear. I'm hoping to repaste my year old EKWB install in the next couple weeks. I just got back from a long vacation and didn't get to it yet. I was going to try KPX on it, had already bought before you guys were talking about the other one. Will be interesting to see how it compares to the Kryonaut I put on there the first time. Probably going to do my CPU with it while I'm in there as well (2+ year old Kryonaut on that as well).
AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
|
python
iCX Member
- Total Posts : 389
- Reward points : 0
- Joined: 2006/07/20 08:34:45
- Status: offline
- Ribbons : 1
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/03 06:25:17
(permalink)
Sajin
rjohnson11 If you opened your RTX 4090 to re-paste it you might have voided the warranty.
lol. I’d like for them to try it. I’ll contact the federal trade commission, and file a case in small claims court.
lmao..im sure that would have worked out for u
objective to reach 16k posts 9700k @5.0ghz asus z390 hero xi Nvidia 4070 thermalright silver arrow sb-e EVGA SUPERNOVA 1000 PS
|
badboy64
SSC Member
- Total Posts : 923
- Reward points : 0
- Joined: 2006/06/05 15:11:40
- Location: Fall River USA
- Status: offline
- Ribbons : 0
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/04 07:57:13
(permalink)
How do you guys cut these pads to down to size of the gpu and cpu? I am gonna redo 2 of my watercooled computer systems next weekend.
post edited by badboy64 - 2024/05/04 08:01:06
14th Intel® Core™ i9 14900KF CPU 3.2GHz@6.0ghz, Memory 2x24GB GSkill Trident Z Trident Z5 7200 mhz DDR5 Ram,4,000 GB MSI M480 PRO 4TB , Motherboard eVga 690 Dark , Operating System Windows 11 Pro 64-Bit, Msi Suprim X24G 4090, Monitor Acer CG437K, Logitech G910, Razer Lancehead Tournament Edition, Thermaltake View 91 RGB plus, eVga 1600w P2 PSU, Custom watercooling. Speed Way Score 11,055 points. https://www.3dmark.com/sw/1112818
|
Sajin
EVGA Forum Moderator
- Total Posts : 49181
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/04 11:59:32
(permalink)
badboy64 How do you guys cut these pads to down to size of the gpu and cpu? I am gonna redo 2 of my watercooled computer systems next weekend.
Sharp scissors worked for me.
|
badboy64
SSC Member
- Total Posts : 923
- Reward points : 0
- Joined: 2006/06/05 15:11:40
- Location: Fall River USA
- Status: offline
- Ribbons : 0
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/04 12:02:33
(permalink)
Sajin
badboy64 How do you guys cut these pads to down to size of the gpu and cpu? I am gonna redo 2 of my watercooled computer systems next weekend.
Sharp scissors worked for me.
Thank you.
14th Intel® Core™ i9 14900KF CPU 3.2GHz@6.0ghz, Memory 2x24GB GSkill Trident Z Trident Z5 7200 mhz DDR5 Ram,4,000 GB MSI M480 PRO 4TB , Motherboard eVga 690 Dark , Operating System Windows 11 Pro 64-Bit, Msi Suprim X24G 4090, Monitor Acer CG437K, Logitech G910, Razer Lancehead Tournament Edition, Thermaltake View 91 RGB plus, eVga 1600w P2 PSU, Custom watercooling. Speed Way Score 11,055 points. https://www.3dmark.com/sw/1112818
|
Sajin
EVGA Forum Moderator
- Total Posts : 49181
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/04 14:00:00
(permalink)
badboy64
Sajin
badboy64 How do you guys cut these pads to down to size of the gpu and cpu? I am gonna redo 2 of my watercooled computer systems next weekend.
Sharp scissors worked for me.
Thank you.
No problem. 👍
|
donta1979
Primarch
- Total Posts : 15892
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 72
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/05/05 09:21:13
(permalink)
badboy64 How do you guys cut these pads to down to size of the gpu and cpu? I am gonna redo 2 of my watercooled computer systems next weekend.
I used an x-acto knife, I used painters tape on the gpu die itself because you cannot take proper measurements at least on mine due to the caps in the way without a caliper. Large piece of blue painters tape X-acto knife to cut around the die gently, peel off place on Honeywell ptm7950 pad as a cutting template stencil, use x-acto Knife with a ruler to help keep a straight line, apply it to the gpu die, toss my air cooler back on and done.
Heatware Retired from AAA Game Industry Jeep Wranglers, English Bulldog Rescue USAF, USANG, US ARMY Combat Veteran My Build Intel Core I9 13900K@6.1ghz, ASUS ROG Ryujin III 360 ARGB, 32gb G.Skill Trident Z5 RGB 7200mhz CL34 DDR5, ASUS Rog Strix Z790-E, ASUS Rog Strix OC 4090, ASUS ROG Wingwall Graphics Card Holder, Seagate limited Edition Cyberpunk 2077 m.2, 2x Samsung 980 m.2 1TB's, 980 & 990 Pro m.2 2TB's, ASUS ROG Hyperion GR701, ASUS ROG Thor 1200W Platinum II, Cablemod RT-Series Pro ModMesh Sleeved 12VHPWR Carbon, ASUS Rog Swift PG35VQ 35", Acer EI342CKR Pbmiippx 34", ROG Harpe Ace Aim Lab Edition mouse, Rog Claymore II keyboard, TCL home entertainment Sound Bar w/Wireless Sub, Steelseries Johnny Silverhand Headset Microsoft Cyberpunk 2077 Xbox controller
|