EVGA

Helpful ReplyHot!Looks like my 4090 is already getting bad after only a year. =\

Page: < 12345 > Showing page 2 of 5
Author
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/24 17:15:36 (permalink)
flyinion
Sajin
I just max it out for extra stability. If you don’t black screen you’ll know you weren’t stable.

What setting are you putting the voltage control to in order to get 1.1mv?  It's showing as a % so I'm thoroughly confused and don't want to overvolt the card.  For the dropdown did you leave it on "Standard MSI" or put it on 3rd party or reference?

Maxing out the voltage slider will put it at 1.1. Yeah, standard.
#31
cezarL
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2016/08/23 10:05:03
  • Status: offline
  • Ribbons : 0
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 02:01:52 (permalink)
But erm... why raise the voltage to begin with? Have you had stability issues with the default voltage?

Maybe I got lucky, but my card can run higher clocks below stock voltage and so far has been rock-solid in normal use: CP2077 PT with a bunch of mods - it's really the only one that needs an overclock at the moment.

I'd be wary of running 1.100 long term... if my card was not stable at stock then I'd send it in under warranty.
#32
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 02:11:53 (permalink)
For extra stability, and the card gets better fps with additional voltage, and 1.1mv was suppose to be safe.
#33
cezarL
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2016/08/23 10:05:03
  • Status: offline
  • Ribbons : 0
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 09:52:45 (permalink)
Hmmm a card is either stable or is not, at a given configuration core+mememory+voltage. How do you define "extra stability"? I'm genuinely curious.

First time I hear that one could get more fps out of static core+memory clocks but with additional voltage. Granted, I've not tested this myself as I'm aiming for the lowest possible voltage (for power efficiency and temperatures) not the highest :)
#34
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 14:17:51 (permalink)
My card is stable at stock settings from what I could tell, but having a little extra safe voltage certainly shouldn’t have hurt anything. Yes, running extra voltage produces better scores in 3dmark from my testing. You never know when you might run into an application that might push your gpu in a way it doesn’t like, and having that extra .3mv might make the difference in your card running without any issues.
#35
flyinion
CLASSIFIED Member
  • Total Posts : 2291
  • Reward points : 0
  • Joined: 2007/03/27 12:17:04
  • Location: California
  • Status: offline
  • Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 14:47:36 (permalink)
Sajin
flyinion
Sajin
I just max it out for extra stability. If you don’t black screen you’ll know you weren’t stable.

What setting are you putting the voltage control to in order to get 1.1mv?  It's showing as a % so I'm thoroughly confused and don't want to overvolt the card.  For the dropdown did you leave it on "Standard MSI" or put it on 3rd party or reference?

Maxing out the voltage slider will put it at 1.1. Yeah, standard.


Ok gave it a try, left AB open etc, The test in OCCT the voltage was getting reported as .89-.9mv though.  It didn't die after 30ish seconds though.  However I put AB back to stock voltage setting and got the same exact results.  I let the tests both run for a few minutes, before it would barely make it 30 seconds every time.  Only change is I closed out a couple open Edge tabs, Steam, and Discord leaving just a few basic background apps open so maybe something like hardware acceleration in Edge was interfering and causing issues before.  I never saw OCCT report 1.1mv.  My temps with OCCT capped out at 60 on die and 79 hotspot, but I also didn't have my fans ramped up, just my basic profile that runs off water temp and my filters are a bit dirty.  In most game use even for example MSFS 2020 which I've managed to hit 99% usage on with heavy weather/scenery going on my hotspot temps are typically 10-12 over the main and the main usually caps out in the low-mid 50's.

AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
#36
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 15:09:45 (permalink)
Sounds like the extra voltage helped you become stable. Nvidia does blacklist specific apps to keep them from using max voltage like furmark, so it looks like occt is one of those apps.

Try running cp2077 with the voltage slider maxed out, and you’ll definitely see 1.1mv being used.
#37
flyinion
CLASSIFIED Member
  • Total Posts : 2291
  • Reward points : 0
  • Joined: 2007/03/27 12:17:04
  • Location: California
  • Status: offline
  • Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 16:14:31 (permalink)
Sajin
Sounds like the extra voltage helped you become stable. Nvidia does blacklist specific apps to keep them from using max voltage like furmark, so it looks like occt is one of those apps.

Try running cp2077 with the voltage slider maxed out, and you’ll definitely see 1.1mv being used.

Hmm not sure on that since I put it back to default after.  I think it was a background thing/etc causing a conflict.  Unfortunately I don't own CP2077 so can't really test with that.

AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
#38
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/25 16:22:34 (permalink)
flyinion
Sajin
Sounds like the extra voltage helped you become stable. Nvidia does blacklist specific apps to keep them from using max voltage like furmark, so it looks like occt is one of those apps.

Try running cp2077 with the voltage slider maxed out, and you’ll definitely see 1.1mv being used.

Hmm not sure on that since I put it back to default after.  I think it was a background thing/etc causing a conflict.  Unfortunately I don't own CP2077 so can't really test with that.

Any demanding game should do the trick then.
#39
oldfresh
New Member
  • Total Posts : 87
  • Reward points : 0
  • Joined: 2021/11/03 17:30:23
  • Location: USA
  • Status: offline
  • Ribbons : 0
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/26 09:21:04 (permalink)
veganfanatic
Card should last longer but you post reeks of mining type abuse
you may need to get a larger cooler
 




"mining type abuse" THAT is hilariously ignorant and assumptious
#40
kraade
CLASSIFIED Member
  • Total Posts : 2378
  • Reward points : 0
  • Joined: 2020/10/18 09:05:52
  • Location: Georgia
  • Status: offline
  • Ribbons : 7
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/26 17:15:12 (permalink)
80 c HS under load at 1.1v sounds ok for now, especially on air, you can always block it if you had too and like your card .
My Daily is 1.25 undervolt and locked the clock at 2910 and 1470 mem , It pulls about 450w and Speedway scores 10800.  temp is 42 C with HS delta at 11c , so 53C . water saturates about 29C at ambient 74 F, I just ran the stinky VL donut and it pulled 535 W , lol , si its just a tune i have found were the card is happy , Lower temp than stock and about 6 % faster , My Cooler version is .975 at 2820clk +1200 mem amd it runs at 39-40 c all day long , Cyberpunk , Hogwarts , PR Stress test , doesn't matter and does not heat up my room .
#41
flyinion
CLASSIFIED Member
  • Total Posts : 2291
  • Reward points : 0
  • Joined: 2007/03/27 12:17:04
  • Location: California
  • Status: offline
  • Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/28 21:01:48 (permalink)
Sajin

Any demanding game should do the trick then.



Have you tried running OCCT basic GPU test at the......I think....default load of 100% with your voltage settings or just stock since your repaste?  I'm curious to find out what your hotspot delta is on that vs the main GPU temp.  I had OCCT set to stop any test if a sensor hit 80C and about 7.5 minutes into a 100% load GPU test it shut down due to 80C on the hotspot with 61 or 62 on the core.  Water was up to 37C but I didn't have my fans fully ramped.  Pretty sure it's passed this test before though so I'm wondering if TG dries out, or my mounting screws are no longer as tight as they should be, the 4 around the core.  I don't remember what cooling you're on though, in my case I'd have to try and get an EKWB backplate off while it's in the rig on a vertical GPU mount.  Temps are usually within expected deltas in actual content though.

AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
#42
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/28 22:48:32 (permalink)
flyinion
Sajin

Any demanding game should do the trick then.



Have you tried running OCCT basic GPU test at the......I think....default load of 100% with your voltage settings or just stock since your repaste?  I'm curious to find out what your hotspot delta is on that vs the main GPU temp.  I had OCCT set to stop any test if a sensor hit 80C and about 7.5 minutes into a 100% load GPU test it shut down due to 80C on the hotspot with 61 or 62 on the core.  Water was up to 37C but I didn't have my fans fully ramped.  Pretty sure it's passed this test before though so I'm wondering if TG dries out, or my mounting screws are no longer as tight as they should be, the 4 around the core.  I don't remember what cooling you're on though, in my case I'd have to try and get an EKWB backplate off while it's in the rig on a vertical GPU mount.  Temps are usually within expected deltas in actual content though.


I only ran it for like a minute to see if I would black screen like you did. I'm using the stock air cooler.
 
When my card was new I ran the msi kombustor (vk) furmark-donut stress test with fans & voltage maxed out and got the following result...
 

 
I haven't tried to run that test again as I'm already hitting 80C on the hotspot just running CP2077 @ 480w. 
 
 
#43
flyinion
CLASSIFIED Member
  • Total Posts : 2291
  • Reward points : 0
  • Joined: 2007/03/27 12:17:04
  • Location: California
  • Status: offline
  • Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/28 23:39:40 (permalink)
Ok thanks, looks like 82C might not be abnormal for extreme stress testing for the hotspot temp.  Maybe I need to set the OCCT setting to 84 to match the max GPU temp.

AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
#44
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/29 01:38:15 (permalink)
No problem.
#45
kraade
CLASSIFIED Member
  • Total Posts : 2378
  • Reward points : 0
  • Joined: 2020/10/18 09:05:52
  • Location: Georgia
  • Status: offline
  • Ribbons : 7
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/29 13:25:54 (permalink)
600W to hit 80  and now its hitting it at 480, I think maybe the vapor chamber might be compromised. Unless someone who blocked a card sells you a stock cooler , RMA might be the only choice 
#46
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/01/29 14:44:15 (permalink)
kraade
600W to hit 80  and now its hitting it at 480, I think maybe the vapor chamber might be compromised. Unless someone who blocked a card sells you a stock cooler , RMA might be the only choice 

Maybe the vapor chamber is compromised. Maybe the cooler is warped. Who knows. I won’t be rma’ing until it’s constantly hitting 95c at 450w.
#47
flyinion
CLASSIFIED Member
  • Total Posts : 2291
  • Reward points : 0
  • Joined: 2007/03/27 12:17:04
  • Location: California
  • Status: offline
  • Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/05 21:26:30 (permalink)
Sajin
rjohnson11
Good Luck and hope this gets solved quickly

It’s resolved for now. Card is working fine at the moment. If it gets hot again I’ll try some thermal grizzly kryonaut, or maybe even some kingpin cooling kpx before rma’ing.



So I"m not sure about the paste you did have on there, but I was debating giving KPX a try and was looking up comparisons to Kryonaut which I've been using.  Found some info that apparently Debauer (spelling?) has said Kryonaut on GPU's is expected to be replaced after a year.  If true that might explain my hotspot temp also seeming to be a bit higher under OCCT type loads than I remember.

AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
#48
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/05 21:38:50 (permalink)
flyinion
Sajin
rjohnson11
Good Luck and hope this gets solved quickly

It’s resolved for now. Card is working fine at the moment. If it gets hot again I’ll try some thermal grizzly kryonaut, or maybe even some kingpin cooling kpx before rma’ing.



So I"m not sure about the paste you did have on there, but I was debating giving KPX a try and was looking up comparisons to Kryonaut which I've been using.  Found some info that apparently Debauer (spelling?) has said Kryonaut on GPU's is expected to be replaced after a year.  If true that might explain my hotspot temp also seeming to be a bit higher under OCCT type loads than I remember.


Before I repasted it was the original paste. Not sure what the original paste was, but it was really good until it got burnt off. When I repasted there was hardly any of it left on the die.
#49
cesarx
SSC Member
  • Total Posts : 672
  • Reward points : 0
  • Joined: 2007/11/06 11:43:20
  • Location: Chile, southamerica
  • Status: offline
  • Ribbons : 6
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/07 13:44:14 (permalink) ☄ Helpfulby Cool GTX 2024/04/04 10:23:02
Sajin
flyinion
Sajin
rjohnson11
Good Luck and hope this gets solved quickly

It’s resolved for now. Card is working fine at the moment. If it gets hot again I’ll try some thermal grizzly kryonaut, or maybe even some kingpin cooling kpx before rma’ing.



So I"m not sure about the paste you did have on there, but I was debating giving KPX a try and was looking up comparisons to Kryonaut which I've been using.  Found some info that apparently Debauer (spelling?) has said Kryonaut on GPU's is expected to be replaced after a year.  If true that might explain my hotspot temp also seeming to be a bit higher under OCCT type loads than I remember.


Before I repasted it was the original paste. Not sure what the original paste was, but it was really good until it got burnt off. When I repasted there was hardly any of it left on the die.


try honeywell ptm7950 its pretty good

Gigabyte Z690 Aorus Elite........MSI Z690 Edge
12700k.......................................12700kf
Red Devil 6950XT...........EVGA RTX2080 Super
EVGA P2 850W.................EVGA GD 700W 
Rip Jaws 32GB 3600..........FlareX 16GB 3200 
Sceptre P35..........................Sceptre P30
#50
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/08 11:42:26 (permalink)
cesarx
Sajin
flyinion
Sajin
rjohnson11
Good Luck and hope this gets solved quickly

It’s resolved for now. Card is working fine at the moment. If it gets hot again I’ll try some thermal grizzly kryonaut, or maybe even some kingpin cooling kpx before rma’ing.



So I"m not sure about the paste you did have on there, but I was debating giving KPX a try and was looking up comparisons to Kryonaut which I've been using.  Found some info that apparently Debauer (spelling?) has said Kryonaut on GPU's is expected to be replaced after a year.  If true that might explain my hotspot temp also seeming to be a bit higher under OCCT type loads than I remember.


Before I repasted it was the original paste. Not sure what the original paste was, but it was really good until it got burnt off. When I repasted there was hardly any of it left on the die.


try honeywell ptm7950 its pretty good

May give it a try when it starts to hit 95c again.
#51
safan80
iCX Member
  • Total Posts : 331
  • Reward points : 0
  • Joined: 2006/12/06 20:30:58
  • Status: offline
  • Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 19:20:52 (permalink)
Sajin
cesarx
Sajin
flyinion
Sajin
rjohnson11
Good Luck and hope this gets solved quickly

It’s resolved for now. Card is working fine at the moment. If it gets hot again I’ll try some thermal grizzly kryonaut, or maybe even some kingpin cooling kpx before rma’ing.



So I"m not sure about the paste you did have on there, but I was debating giving KPX a try and was looking up comparisons to Kryonaut which I've been using.  Found some info that apparently Debauer (spelling?) has said Kryonaut on GPU's is expected to be replaced after a year.  If true that might explain my hotspot temp also seeming to be a bit higher under OCCT type loads than I remember.


Before I repasted it was the original paste. Not sure what the original paste was, but it was really good until it got burnt off. When I repasted there was hardly any of it left on the die.


try honeywell ptm7950 its pretty good

May give it a try when it starts to hit 95c again.



Don't waste your time with liquid metal. Gigabtye 30 series cards about a year ago or so were dying left and right. RMA it. 
Just for reference Gamer's nexus when they were doing PSU testing had a gigabyte card die that was in a separate system out of no where.
I believe this video https://youtu.be/aACtT_rzToI or the one after it talks about it. https://youtu.be/Xts3pvbcFos
 
Here a run down of the gigabyte 30 series problem. https://youtu.be/JFgsL5NFn_Y
 
You can search for "GIGABYTE 30 series dying" and go down the rabbit hole.
 
post edited by safan80 - 2024/02/17 20:46:31
#52
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 22:55:13 (permalink)
Temps are starting to go up again. 🤬

honeywell ptm7950 ordered. 😎
#53
safan80
iCX Member
  • Total Posts : 331
  • Reward points : 0
  • Joined: 2006/12/06 20:30:58
  • Status: offline
  • Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 23:01:16 (permalink)
Sajin
Temps are starting to go up again. 🤬

honeywell ptm7950 ordered. 😎



Just a warning Liquid Metal is NOT thermal paste and can eat certain metals. That WILL void your warranty. 
 
Please watch this video https://youtu.be/MM0kVXU1rjA
it is from buildzoid.
#54
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 23:03:18 (permalink)
honeywell ptm7950 is not thermally conductive it isn’t liquid metal.
#55
safan80
iCX Member
  • Total Posts : 331
  • Reward points : 0
  • Joined: 2006/12/06 20:30:58
  • Status: offline
  • Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 23:05:07 (permalink)
Sajin
honeywell ptm7950 is not thermally conductive it isn’t liquid metal.



OK. I didn't want you to ruin your warranty for something that will not help.
#56
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 23:06:00 (permalink)
I would never put liquid metal on my hardware. 😊
#57
safan80
iCX Member
  • Total Posts : 331
  • Reward points : 0
  • Joined: 2006/12/06 20:30:58
  • Status: offline
  • Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 23:07:39 (permalink)
Sajin
I would never put liquid metal on my hardware. 😊



Sony uses it on the PS5... That is kind of scary. 
#58
Sajin
EVGA Forum Moderator
  • Total Posts : 49090
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 23:18:28 (permalink)
safan80
Sajin
I would never put liquid metal on my hardware. 😊



Sony uses it on the PS5... That is kind of scary. 

How is that scary?
#59
safan80
iCX Member
  • Total Posts : 331
  • Reward points : 0
  • Joined: 2006/12/06 20:30:58
  • Status: offline
  • Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\ 2024/02/17 23:24:46 (permalink)
Sajin
safan80
Sajin
I would never put liquid metal on my hardware. 😊



Sony uses it on the PS5... That is kind of scary. 

How is that scary?



LM eats aluminum and lead free solder so when the gasket material fails that holds the LM into place... Goodbye heatsink and goodbye PS5. If you watch teardown videos of the PS5 you will understand how easy it would be to ruin it. I wonder how many know the level of damage LM causes.  
#60
Page: < 12345 > Showing page 2 of 5
Jump to:
  • Back to Mobile