Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/02/17 23:32:09
(permalink)
I see. I don’t do consoles, so not an issue I got to worry about. Sounds like ps5 owners got something to worry about outside of warranty.
|
yaggaz
FTW Member
- Total Posts : 1510
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/02/23 02:27:25
(permalink)
Sajin
Temps when new:
Temps after a year:
Those temps were even after a repaste. I was hitting 95c on the hotspot before the repaste. So it's alot better, and within spec now, but is definitely getting hotter as time goes on. Fans could be going out, but the memory temps haven't increased at all, so maybe the fans are ok, but the die is getting worse.
Glad you got it sorted out. If I run out of patience waiting for the 5080 series, I might go for one of the 4080/4090 models that have an AIO. Be interesting to see temp difs and whether they can bask in the glory of evgas Hybrids. Sigh... can't believe I'll never get an evga hybrid again
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8888
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/02/23 07:52:30
(permalink)
Hopefully it's not a widespread issue since that will hurt NVIDIA and really PC gaming if a lot of 4090 have a short lifespan. Then again people who have a 4090 often times upgrade when a new generation comes out.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/02 15:56:57
(permalink)
15 minute stress test averaging 576w...  PTM7950 is awesome.  Problem solved. 
|
kraade
CLASSIFIED Member
- Total Posts : 2385
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/03 13:25:37
(permalink)
wow that's an excellent result
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/03 13:59:51
(permalink)
kraade
wow that's an excellent result
I was like wow the entire time myself. 😀
|
flyinion
CLASSIFIED Member
- Total Posts : 2296
- Reward points : 0
- Joined: 2007/03/27 12:17:04
- Location: California
- Status: offline
- Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/04 10:00:47
(permalink)
What did you use to stress test it?
AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/04 17:11:02
(permalink)
flyinion
What did you use to stress test it?
msi kombustor using test (vk)furmark-donut.
|
flyinion
CLASSIFIED Member
- Total Posts : 2296
- Reward points : 0
- Joined: 2007/03/27 12:17:04
- Location: California
- Status: offline
- Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/05 17:08:23
(permalink)
Sajin
flyinion
What did you use to stress test it?
msi kombustor using test (vk)furmark-donut.
Thanks! I was curious to try whatever you ran just so I can compare my waterblocked card with year old TG on it. Mostly to see how my hotspot compares to the main temp and to your temps.
AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/05 17:29:51
(permalink)
flyinion
Sajin
flyinion
What did you use to stress test it?
msi kombustor using test (vk)furmark-donut.
Thanks! I was curious to try whatever you ran just so I can compare my waterblocked card with year old TG on it. Mostly to see how my hotspot compares to the main temp and to your temps.
No problem. When you run the test make sure you minimize the window that shows the donut. Power will go off the chart then. 😁
|
donta1979
Primarch
- Total Posts : 9028
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 73
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/05 19:36:51
(permalink)
Yup Honeywell TPM7950 is pretty awesome.
Heatware
Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
|
flyinion
CLASSIFIED Member
- Total Posts : 2296
- Reward points : 0
- Joined: 2007/03/27 12:17:04
- Location: California
- Status: offline
- Ribbons : 9
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/05 21:28:10
(permalink)
Sajin
No problem. When you run the test make sure you minimize the window that shows the donut. Power will go off the chart then. 😁
Wow yeah it shot to max power (450W in my case, didn't have the power slider past 100). Looks like I might need to re-paste and/or check my mounting or I just have a hotter hot spot. GPU/HS temp was maxed at 59.4/73.5 with a water temp of 35C. HS temp should be a couple degrees cooler than that I think. Could just be my card I guess but pretty sure other stress tests I ran a year ago the HS was closer to about a 10C difference.
AMD Ryzen 5950X | Asus Crosshair VIII Hero | Gigabyte Gaming OC 4090 w/EK Vector2 | GSkill Trident Z Neo 2x16GB DDR4-3600 | WD SN850 2TB | Samsung 970 EVO Plus 500GB & 860 Evo 2TB | Phanteks Enthoo 719 | Seasonic Prime Ultra Gold 1000W | Steelseries M750 TKL | SteelSeries Prime Wireless | SteelSeries Arctis Pro + GameDAC | Kanto YU2 + Yamaha sub | Schiit Magni 2 Uber & Modi 2 Uber | LG 34GN850 | Asus PG279Q | Win 11 Pro | Custom water loop
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/05 22:20:21
(permalink)
flyinion
Sajin
No problem. When you run the test make sure you minimize the window that shows the donut. Power will go off the chart then. 😁
Wow yeah it shot to max power (450W in my case, didn't have the power slider past 100). Looks like I might need to re-paste and/or check my mounting or I just have a hotter hot spot. GPU/HS temp was maxed at 59.4/73.5 with a water temp of 35C. HS temp should be a couple degrees cooler than that I think. Could just be my card I guess but pretty sure other stress tests I ran a year ago the HS was closer to about a 10C difference.
If you decide to re-paste definitely try out some PTM7950.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
|
Shraf2k
Superclocked Member
- Total Posts : 156
- Reward points : 0
- Joined: 2021/07/12 20:27:18
- Status: offline
- Ribbons : 1
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/28 04:35:33
(permalink)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/28 15:54:42
(permalink)
Yeah, I was getting a bit worried myself as I didn’t want to rma. Glad the honeywell worked as well as it did. 👍
|
yoadknux
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2020/12/10 13:44:30
- Status: offline
- Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/31 07:23:37
(permalink)
I cannot see which 4090 you have, on my TUF 4090 the core and memory are fine, but hotspot-core ("Delta") gradually increases over time to around 20c. I recently applied fresh paste, and hotspot-core delta was <10c. Then a week later it increased to ~15c, and I guess by the end of April it'll get to that 90c zone again. It happened with two high quality pastes (Noctua NH-T2, Thermal Grizzly Kryonaut Extreme).
I'm not sure what can be done to solve it. I guess it's a mounting pressure issue, in which case changing to softer thermal pads could help, I'm also interested in testing the PTM7950. Doing monthly repasting is not a good idea, the card is way more likely to break due to the ****ty connector than due to high hotspot. I also haven't tried undervolting.
|
donta1979
Primarch
- Total Posts : 9028
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 73
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/31 12:29:49
(permalink)
yoadknux
I cannot see which 4090 you have, on my TUF 4090 the core and memory are fine, but hotspot-core ("Delta") gradually increases over time to around 20c. I recently applied fresh paste, and hotspot-core delta was <10c. Then a week later it increased to ~15c, and I guess by the end of April it'll get to that 90c zone again. It happened with two high quality pastes (Noctua NH-T2, Thermal Grizzly Kryonaut Extreme).
I'm not sure what can be done to solve it. I guess it's a mounting pressure issue, in which case changing to softer thermal pads could help, I'm also interested in testing the PTM7950. Doing monthly repasting is not a good idea, the card is way more likely to break due to the ****ty connector than due to high hotspot. I also haven't tried undervolting.
Get yourself an Authentic Honeywell PTM7950 from MODDIY, I suggest the 80x80 pad that's at least 1x gpu and 1-2 cpu's. The things are amazing on cpu's and gpus.
Heatware
Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/03/31 13:11:13
(permalink)
yoadknux
I cannot see which 4090 you have, on my TUF 4090 the core and memory are fine, but hotspot-core ("Delta") gradually increases over time to around 20c. I recently applied fresh paste, and hotspot-core delta was <10c. Then a week later it increased to ~15c, and I guess by the end of April it'll get to that 90c zone again. It happened with two high quality pastes (Noctua NH-T2, Thermal Grizzly Kryonaut Extreme).
I'm not sure what can be done to solve it. I guess it's a mounting pressure issue, in which case changing to softer thermal pads could help, I'm also interested in testing the PTM7950. Doing monthly repasting is not a good idea, the card is way more likely to break due to the ****ty connector than due to high hotspot. I also haven't tried undervolting.
I have the gigabyte gaming oc. PTM7950 will fix your issue. It did for me.
|
kraade
CLASSIFIED Member
- Total Posts : 2385
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/01 17:24:03
(permalink)
That looks like some good stuff
|
kacan22
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2017/07/13 20:36:08
- Location: Europe
- Status: offline
- Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/04 02:25:53
(permalink)
I had same problem because ASUS manage to not apply thermal paste correctly. Already ordered PTM7950 but kryonaut will be good for now. Furmark test GPU: ASUS ROG STRIX 4090 OC Stock thermal paste: 78C core, memory 68C, hotspot 105.3C Thermal Grizzly Kryonaut: 69C core, memory 72C, hotspot 79.7C  
post edited by kacan22 - 2024/04/04 02:35:53
|
yoadknux
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2020/12/10 13:44:30
- Status: offline
- Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/04 03:21:26
(permalink)
kacan22
I had same problem because ASUS manage to not apply thermal paste correctly. Already ordered PTM7950 but kryonaut will be good for now.
Furmark test
GPU: ASUS ROG STRIX 4090 OC
Stock thermal paste: 78C core, memory 68C, hotspot 105.3C
Thermal Grizzly Kryonaut: 69C core, memory 72C, hotspot 79.7C
I have the same issue with my TUF, I repaste and hotspot + core drop by a lot, but then 7-10 days later and temps go back up. I tried TM Kryo Extreme and Noctua NH-T2 and both didn't keep their initial temps. I'm waiting for 7950 to arrive to see if that helps.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31049
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/04 10:27:50
(permalink)
Where is everyone ordering PTM7950 from?
Seems to be some quality issues or knockoff/counterfeit product out there, that some people have reported on other forum's posts
The results look very good for the PTM7950, I just want to get it from a reliable vendor
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
kacan22
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2017/07/13 20:36:08
- Location: Europe
- Status: offline
- Ribbons : 2
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/04 11:51:57
(permalink)
Cool GTX
Where is everyone ordering PTM7950 from?
Seems to be some quality issues or knockoff/counterfeit product out there, that some people have reported on other forum's posts
The results look very good for the PTM7950, I just want to get it from a reliable vendor
My friend ordered from this store on aliexpress preformance is phenomenal (he didnt have any left so i was forced to order). Only seller that actually sell original honeywell 7950. You can remove link later if its against evga forum rules. Also moddiy sell those for US and they ship super fast and you dont need to wait 1+ month. Link: https://www.aliexpress.co...main.14.60711802u7leVj
post edited by kacan22 - 2024/04/04 11:54:35
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/04 17:23:18
(permalink)
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2438
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: online
- Ribbons : 42
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/05 06:37:37
(permalink)
I saw LTT was also advertising that they are now selling it because it was hard to get legitimate supply and they saw an opportunity to offer it on their own store.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31049
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/05 06:46:35
(permalink)
B0baganoosh
I saw LTT was also advertising that they are now selling it because it was hard to get legitimate supply and they saw an opportunity to offer it on their own store.
OK, I found that LTT store PTM7950https://www.lttstore.com/search?q=PTM7950&options%5Bprefix%5D=last60mmx60mmx0.25mm @ $14.99 USD 200mmx160mmx0.25mm @ $69.99 USD shipping looks to be $9.99 (for my address at least) there is a place for discount codes - if you have one. (My online automatic code checker, "Honey" - did not find an active discount code) Sajin
I can report my temps are still the same a month later. I ordered mine from here… https://www.amazon.com/gp...x_pop_mob_b_asin_title
I'm hoping you keep updating your test drive, will be interesting to see a monthly update to see if it lasts 1 year or more (from Amz link above) PTM7950 40x80x0.2mm @ 16.99 seeing an instant discount ($3.00) - (for now, Amazon "live pricing"  ) Thanks everyone 
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
donta1979
Primarch
- Total Posts : 9028
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 73
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/05 09:46:17
(permalink)
kacan22
I had same problem because ASUS manage to not apply thermal paste correctly. Already ordered PTM7950 but kryonaut will be good for now.
Furmark test
GPU: ASUS ROG STRIX 4090 OC
Stock thermal paste: 78C core, memory 68C, hotspot 105.3C
Thermal Grizzly Kryonaut: 69C core, memory 72C, hotspot 79.7C
By any chance did you measure the H & W of die that touches the vapor chamber plate? I have looked and asked everywhere with no luck. Nvidia’s squared measurement is wrong as the chip is taller than it is wide.
Heatware
Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
|
donta1979
Primarch
- Total Posts : 9028
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 73
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/05 12:37:01
(permalink)
Well just put the Honeywell pad on my Rog Strix oc 4090 hotspot was getting up to 82c, the pad an automatic drop with no cure time yet freshly installed it’s already down to 67c. Idle temps went from 28-31c down to 26c already.  
post edited by donta1979 - 2024/04/05 12:44:42
Heatware
Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
|
donta1979
Primarch
- Total Posts : 9028
- Reward points : 0
- Joined: 2007/02/11 19:27:15
- Location: In the land of Florida Man!
- Status: offline
- Ribbons : 73
Re: Looks like my 4090 is already getting bad after only a year. =\
2024/04/05 13:52:06
(permalink)
Cool GTX
Where is everyone ordering PTM7950 from?
Seems to be some quality issues or knockoff/counterfeit product out there, that some people have reported on other forum's posts
The results look very good for the PTM7950, I just want to get it from a reliable vendor
MODDIY if you want an authentic one that performs better than some of the pre packaged knockoffs of Amazon. There are legit ones on Amazon but I wanted to ensure I got the real thing.
post edited by donta1979 - 2024/04/05 13:54:16
Heatware
Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU
|