EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:10:19
(permalink)
rippleeffect
 Same issue as a few others in here. Flashed standard bios and now no display. I'm on the OC bios to get back into Windows. On standard bios, it boots to Windows, just no display.
z390 Taichi Ultimate. CAM enabled and CSM disabled.
Maybe I'm missing something else in UEFI? Does anyone else have issues with this motherboard or has anyone got it working?
I'm obviously not going to flash the OC bios until I get the standard one working.
Thoughts? Any ideas Jacob?
Can you confirm if "Above 4G Decoding" is enabled?
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:12:05
(permalink)
Dasoa
Jacob, Can we get links for the BAR VBIOS (OC 500wXOC and normal) for the oc3090 program cards please?
I'm needing this as well
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:15:04
(permalink)
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:15:55
(permalink)
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
xxplatoontekkxx
New Member
- Total Posts : 37
- Reward points : 0
- Joined: 2019/04/07 09:20:26
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:17:32
(permalink)
instagram: xxplatoontekkxx #SWOUP
|
rippleeffect
New Member
- Total Posts : 53
- Reward points : 0
- Joined: 2007/03/21 20:54:00
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:27:13
(permalink)
EVGA_JacobF
rippleeffect
Same issue as a few others in here. Flashed standard bios and now no display. I'm on the OC bios to get back into Windows. On standard bios, it boots to Windows, just no display.
z390 Taichi Ultimate. CAM enabled and CSM disabled.
Maybe I'm missing something else in UEFI? Does anyone else have issues with this motherboard or has anyone got it working?
I'm obviously not going to flash the OC bios until I get the standard one working.
Thoughts? Any ideas Jacob?
Can you confirm if "Above 4G Decoding" is enabled?
Can confirm it was. 4G Decoding was enabled, C.A.M. was enabled, as was CSM disabled(required to see the other two) I've enabled CSM to get back to the normal bios. The extra fan noise was bugging me =D It looks like there may be others with AsRock boards that aren't working. Z370 Resizable BAR Support Working? : ASRock (reddit.com)
post edited by rippleeffect - 2021/03/30 12:34:34
|
gt5759
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2016/12/10 15:33:37
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:33:40
(permalink)
EVGA_JacobF
gt5759
Jacob what is the vbios for 3090 xc3 ultra hybrid? I can't get the vbios update to complete but I show 94.02.26.887B as current vbios. When trying to flash it goes to no signal/blank screen and have waited up to 10 minutes with no change, hit a key and the screen comes back up saying user aborted. I have reinstalled X1, drivers are current, mobo with 4g and rebar enabled, cms disabled, w10 uefi.
Latest BIOS release as well?
yes, latest BIOS
|
Dasoa
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2020/11/05 12:44:45
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:37:49
(permalink)
Thanks jacob for the links  Phroze is good for the links given by jacob? Did you test it I will receive my new card soon after contact with email 0c3090. Is the installation correct for you?
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:38:59
(permalink)
Dasoa
Thanks jacob for the links
Phroze is good for the links given by jacob? Did you test it
I will receive my new card soon after contact with email 0c3090.
Is the installation correct for you?
I cannot test because my card will not be here till tomorrow but in the file name it has the numbers 3982 which is specific to the program cards. Should be good.
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
schmak01
Superclocked Member
- Total Posts : 174
- Reward points : 0
- Joined: 2011/03/18 18:43:13
- Location: Dallas, TX
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:42:29
(permalink)
Worked flawlessly for me on a 2080 FTW 3 Ultra Hybrid (kit). My only hangup was I couldn't find the setting in my MB bios, but it had a clickable icon at the top, but my MX Ergo doesn't work in bios, had to hook up a crappy mouse to enable it.
- CPU: 5900X / 3800XT
- MB: Asus Strix X570-E / Asus TUF B550
- RAM: 32 GB TridentZ 3200 CL14 (stock timings) / 64 GB Ripjaws 3600 cl 16
- GPU: EVGA 3080TI Hybrid (converted from FTW 3 Ultra) / EVGA 3080 Hybrid (converted from FTW 3 Ultra)
- Storage: Sabrent 2 TB PCIe 4.0 SSD,WD SN750 1 TB PCIe 3.0 SSD / 2x 4TB WD RED Pro, 1x Sabrent Rocket Pro 1TB, 4x Crucial MX500 2TB
- Cooling: H115i Pro Platinum / Vetroo 360mm AIO
- Case: Corsair 680X / Corsair 5000D Black
|
The_Professor
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2012/04/04 09:56:11
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:53:49
(permalink)
EVGA_JacobF
The_Professor
Hi,
is it posible to get only the vBIOS for my RTX3070 XC3? In past i got so many bad results with EVGA Precision X1, broken FAN curves e.g.
And i dont wont to install that software. So is it possible only the get the bios for 08G-P5-3755-KR?
Many Thanks Jacob :)
https://cdn.evga.com/bios/30Series/3755V94043A405E.zip
Working perfectly Thanks Jacob 
|
Death_wish01
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2010/08/02 11:47:43
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:59:13
(permalink)
EDIT! : I had to change a setting in mobo bios and it works now. I forget what setting. it was right next to the resizable bar setting.... (feels too brain dead to remember) hey Jacob. thanks for hanging out on the forums. I Installed the new PX1 and flash my Vbios in the normal bios switch setting. I rebooted the PC when the prompts told me to and my PC wont boot up. my board does the following error codes with beep codes: B4 with sad beeps happy beeps B6 sad beeps A9 once beeps are done screen is blank when I switch to the old VBios on the card via physical switch. it boots up as normal. Can I switch to the newly flash Vbios while the PC is running to reflash the Vbios? GPU: 10G-P5-3897-KR Mobo: 123-CS-E397-KR
post edited by Death_wish01 - 2021/03/30 13:10:09
|
MDN79
New Member
- Total Posts : 28
- Reward points : 0
- Joined: 2021/03/30 12:50:36
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 12:59:36
(permalink)
Flashed my 3080 FTW3 Ultra over OC 450 Watt BIOS and also got bug with fans. Looks like this:  This is 1.1.7. Went back to it to check whather the problem gone. But it's still there. Before flashing of update RPM was 1000 (33 or 34%) on OC BIOS. Now it's a mess - on the right I got 33-33-0%, on the left 37%. The same on 1.1.8. Pushing default and rebooting don't work. Is there any solution except rollback? Thanks!
|
gt5759
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2016/12/10 15:33:37
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:04:33
(permalink)
gt5759
Jacob what is the vbios for 3090 xc3 ultra hybrid? I can't get the vbios update to complete but I show 94.02.26.887B as current vbios. When trying to flash it goes to no signal/blank screen and have waited up to 10 minutes with no change, hit a key and the screen comes back up saying user aborted. I have reinstalled X1, drivers are current, mobo with 4g and rebar enabled, cms disabled, w10 uefi.
Latest BIOS release as well?
yes, latest BIOS Jacob problem solved! Noted in another post i found in our forums here, i remote logged in and seen the cmd window was still open when the display disconnects after hitting Y the first time to start the vbios update, hitting Y again about 60 seconds after the screen went off it completes the update and all is well! Just for a system breakdown for others that might run into this issue.. 8700k aorus gaming 7 z370 3090 xc ultra hybrid Rebar is functional and marks are green on X1 and nvidia panel.
|
MarcoWagner
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2021/03/30 09:20:06
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:14:34
(permalink)
Can anyone confirm this working on intel 9th gen cpus? I have 9700K.
|
memnon8711
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2021/01/03 17:33:24
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:17:27
(permalink)
I wonder if this is an issue with Asus motherboards and the fact they have Resizable BAR set as an Auto option to enable it. Maybe Precision X1 can't pick up Auto and the fact Resizable BAR is turned on for the motherboard. I have same issue with a Prime x470 with a Ryzen 3600 installed. NVidia Control Panel and GPU-Z show Resizable BAR is enabled though.
|
telehog
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:19:19
(permalink)
Rampage VI Extreme Encore motherboard bios have not been updated yet. Only 2 not updated yet. Guess I'll just wait, but do have a new x299 dark I can swap out and have 4 slot spacing for sli . I do like Encore.
|
Dasoa
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2020/11/05 12:44:45
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:20:19
(permalink)
Phroze what do the numbers(3982) you have indicated for the graphics cards in the oc3090ftw3 program correspond to?
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:22:21
(permalink)
Dasoa
Phroze what do the numbers(3982) you have indicated for the graphics cards in the oc3090ftw3 program correspond to?
During the program RMA the card out under the RMA on my EVGA profile was a 24G-P5-3982-B2.
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
Detox1
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2014/10/15 16:22:08
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:25:32
(permalink)
Hi. Please don't tell me I have to reinstall windows for this to work. I did a reinstall earlier this month. 
|
phroze
SSC Member
- Total Posts : 799
- Reward points : 0
- Joined: 2018/09/17 20:09:17
- Location: WA State
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:27:21
(permalink)
Detox1
Hi. Please don't tell me I have to reinstall windows for this to work. I did a reinstall earlier this month.
I'd reinstall and get away from the BIOS style installation and move to UEFI. This is a BIOS setting. Here are some reasons and explanations https://www.freecodecamp....signed%20applications.
Case: Lian Li O11 Dynamic XLMobo: Asrock X570 TaichiCPU: Ryzen 5900xGPU: EVGA RTX 3090 FTW3 UltraRAM: Crucial Ballistix OC to 3800 16 18 18 1:1PSU: EVGA SuperNova G2 1600wCooling: Custom hardline loop: optimus blocks, primochill stuff, lian li stuff, HW Labs 60mm radiators, custom stuff
|
Sultan.of.swing
Superclocked Member
- Total Posts : 174
- Reward points : 0
- Joined: 2012/12/14 20:58:21
- Status: offline
- Ribbons : 3
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:27:28
(permalink)
telehog
Rampage VI Extreme Encore motherboard bios have not been updated yet. Only 2 not updated yet. Guess I'll just wait, but do have a new x299 dark I can swap out and have 4 slot spacing for sli . I do like Encore.
There is a Rebar bios for the R6EE on the Rog forums that has been out for over 5 months.
|
Sinister89
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2014/08/14 12:38:17
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:33:31
(permalink)
Same issue for me. Asus Strix z490-A Gaming with latest bios and PX1 shows error for motherboard. Confirmed resizable bar is enabled, 4g enabled, csm disabled. I have a 3080 ftw3 ultra with hybrid kit and hybrid bios.
|
Slyflyer32
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2015/02/13 15:33:08
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:33:37
(permalink)
@EVGA_JacobF; I have a 3090 FTW3 Ultra; but I never updated the OC Bios from 450W to 500W. My card does NOT seem to have PCIe load balancing issues (maybe I lucked out?) even though I got this card last year (Made in China model, black trim). I can hit 450W in games and not pull more than 76W on my PCIe slot, so I am happy with that. Questions: 1. Will PX1 actually flash my vbios with an "official" 500W ReBAR Bios for the OC Slot now (which is the slot I am using) or will it flash a 450W ReBAR Bios for the OC Slot? 2. Will this update possibly screw something up to where I no longer have good load balancing and my PCIe power draw will now go above 75W? (I get this may be a different topic; but the idea of screwing up something good that many have had issues with does concern me). Thanks ahead of time for any insight!
post edited by Slyflyer32 - 2021/03/30 16:27:51
- EVGA GeForce RTX 3090 FTW3 Ultra 24GB (Currently @ 2050MHz Core / 20500MHz Memory)- Asus ROG Swift PG27UQ 27" Gaming Monitor 4K UHD 144Hz DP HDMI G-SYNC HDR1000 Aura Sync- AMD Ryzen 9 5950X Vermeer 16-Core AM4 CPU @ 4.8Ghz All Core (boost to 5.2Ghz) | MSI X570 MEG ACE AMD AM4 ATX Motherboard- G.SKILL Ripjaws V 32GB (4 x 8GB) DDR4 3733 (16-15-15-30 @ 1T)- Sound Blaster Sound Core 3D | nVMe 4.0 980 Pro 2TB SSD (Primary Drive) | nVMe 3.0 970 EVO 1TB SSD (Secondary Drive)
|
mrthanhnguyen
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2011/10/26 15:09:48
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:35:20
(permalink)
How can we enable Bar for 1000w bios?
|
Tholidux
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/09/25 19:44:01
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:41:40
(permalink)
How do you guys have so many options in Precision X1? This is all thats on mine: 
|
Jed2020
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2020/10/05 19:52:42
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:41:59
(permalink)
I am also having the issue with being unable to drop two of my fans below 33%.
To add some details others haven't:
When I installed the new update for Precision X it said my 3080 FTW3 Ultra (on 450W OC beta bios) needed a firmware update on launch, so I allowed it to do so. I think made sure my fans were controllable, at which point they were including shutting them off at 0%.
I then installed the VBios update via Precision and rebooted. Now the lowest Fan 1 & 2 can be set to is 33%.
|
mrthanhnguyen
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2011/10/26 15:09:48
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:46:05
(permalink)
How can we enable Bar for 1000w bios?
|
Detox1
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2014/10/15 16:22:08
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:48:35
(permalink)
phroze
Detox1
Hi. Please don't tell me I have to reinstall windows for this to work. I did a reinstall earlier this month.
I'd reinstall and get away from the BIOS style installation and move to UEFI. This is a BIOS setting. Here are some reasons and explanations
Thanks for the link & quick response. I'll have to think if it's worth the hassle, just for this one feature.
|
gt5759
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2016/12/10 15:33:37
- Status: offline
- Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series
2021/03/30 13:55:20
(permalink)
Detox1
phroze
Detox1
Hi. Please don't tell me I have to reinstall windows for this to work. I did a reinstall earlier this month.
I'd reinstall and get away from the BIOS style installation and move to UEFI. This is a BIOS setting. Here are some reasons and explanations
Thanks for the link & quick response. I'll have to think if it's worth the hassle, just for this one feature.
google mbr2gpt conversion
|