EVGA

Hot!Enable Resizable Bar on EVGA GeForce RTX 30 Series

Page: << < ..3132333435.. > >> Showing page 33 of 37
Author
jexux
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2009/02/08 05:12:08
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/06/28 04:53:13 (permalink)
Any BIOS for 3080 Ti Hybrid FTW3 Ultra 500-520W ?
kraade
FTW Member
  • Total Posts : 1258
  • Reward points : 0
  • Joined: 2020/10/18 09:05:52
  • Location: Georgia
  • Status: online
  • Ribbons : 3
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/06/29 19:06:22 (permalink)
A; the card I just installed, It was already enabled


Niam2020
New Member
  • Total Posts : 100
  • Reward points : 0
  • Joined: 2021/01/15 08:56:04
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/06/30 05:04:30 (permalink)
This will be great when I get my 30 series.
icf211
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2021/06/04 02:45:42
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/06/30 12:20:51 (permalink)
How do I find out if my mother board supports this?
tc0566
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2012/03/05 16:14:55
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/06/30 12:37:35 (permalink)
icf211
How do I find out if my mother board supports this?

Just go to your MB manufacturer's page and look for bios that supports  Re-size BAR function.

 
Use my Associate code to save money on your next purchase!
K8KDH9WX5PDC7ZN
And for all those that use it THANK YOU

japelito
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2020/10/07 17:10:23
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/01 17:13:14 (permalink)
wrong thread sorry

10G-P5-3885-KL   9/25/2020 6:36:12 PM PT No
12G-P5-3953-KR   7/01/2021 6:40:24 AM PT No
hairy0
New Member
  • Total Posts : 51
  • Reward points : 0
  • Joined: 2008/02/04 15:38:10
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/02 07:39:21 (permalink)
For me, the latest version that still works or has all the check marks in the resizable bar is 1.1.8.0, nothing newer works or has all the check marks. I tried all the versions since 1.1.8.0 and they all show the yellow warning symbol and say the resizable bar is disabled. I'm running the msi x570 tomahawk wifi bluetooth MB with the GTX 3080 FTW 3 Ultimate.
tc0566
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2012/03/05 16:14:55
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/02 08:32:04 (permalink)
hairy0
For me, the latest version that still works or has all the check marks in the resizable bar is 1.1.8.0, nothing newer works or has all the check marks. I tried all the versions since 1.1.8.0 and they all show the yellow warning symbol and say the resizable bar is disabled. I'm running the msi x570 tomahawk wifi bluetooth MB with the GTX 3080 FTW 3 Ultimate.


If it works in 1.1.8.0 then it probably still cant locate the nvml.dll on newer versions of PX1. Copy nvml.dll located in C:\Program Files\NVIDIA Corporation\NVSMI to your PX1 install location. C:\Program Files\EVGA\Precision X1. Should work after that. And in NVIDIA control panel in System info it should still show enabled even without copying the .dll file. GPU-Z also can tell you if re-bar is enabled.

 
Use my Associate code to save money on your next purchase!
K8KDH9WX5PDC7ZN
And for all those that use it THANK YOU

jaredbyoung
iCX Member
  • Total Posts : 396
  • Reward points : 0
  • Joined: 2020/10/15 16:42:59
  • Status: offline
  • Ribbons : 1
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/02 17:37:44 (permalink)
MattyMattMatt
So if it says "Please check with your motherboard vendor" then I assume my motherboard doesn't support this?


Little late but maybe still helpful.
 
It may just mean that you have to enable it in your BIOS. On my ASUS motherboard there was an option that said something like "Enable encoding above 4g" sorry that may not be the exact wording of that option. But I had to enable that then it showed the option to enable Re-Bar.
 
If your current BIOS version doesn't support it an updated BIOS might, so you'd have to install the new BIOS before the option would be there.
 
What motherboard do you have?
ghosttry
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2021/07/03 07:59:49
  • Status: offline
  • Ribbons : 0
Flagged as Spam (1)
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/03 08:26:37 (permalink)
hello?
lybo_spurs
New Member
  • Total Posts : 18
  • Reward points : 0
  • Joined: 2016/07/04 03:55:52
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/03 08:29:31 (permalink)
Hi everyone

I just enabled my bar on EVGA precision.
I have a 3090 ftw3 hybrid card an i wonder how do I know it is doing its job?
jaredbyoung
iCX Member
  • Total Posts : 396
  • Reward points : 0
  • Joined: 2020/10/15 16:42:59
  • Status: offline
  • Ribbons : 1
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/03 12:37:33 (permalink)
lybo_spurs
Hi everyone

I just enabled my bar on EVGA precision.
I have a 3090 ftw3 hybrid card an i wonder how do I know it is doing its job?

The precision software has a tab to show you that it's working.
 
If you want to know if it's providing performance improvement then disable it, run a graphics benchmark then enable it and run the benchmark again.
 
joorge
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2018/11/18 09:16:57
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/04 13:46:08 (permalink)
Hello,i have a doubt,You said disable CMS first before installing the update but I did it without having it disabled because I bought the 3080 ti ftw3 last week and I didn't know anything, I just installed precision x1, it asked me to update the bios and I did it.

It's fine or i need to reflash the bios?

Thank you.
Rizzle1119
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2021/07/04 19:17:23
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/04 20:53:29 (permalink)
But the 3070 only has 8gb. Will it actually do anything?
529th
SSC Member
  • Total Posts : 576
  • Reward points : 0
  • Joined: 2009/08/18 17:38:02
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/06 07:18:08 (permalink)
Picked up an EVGA 3080Ti FTW3 Ultra July 3rd  Set it all up, played some games the past couple of days.  Decided to see if I can get Resize BAR working.  Downloaded the latest 1.2.2.0 Precision X1, upon running it for the first time it said it needed to update the firmware and to press start.  Clicked start, the fans kicked up to what seemed to be 100% speed capability, red lights by the PSU VGA plugs lit up, the RGB turned off, and it started to update.  Is that normal?  Didn't even check what firmware I had before
transdogmifier
CLASSIFIED ULTRA Member
  • Total Posts : 5620
  • Reward points : 0
  • Joined: 2003/09/05 14:26:21
  • Location: Orlando, Fl
  • Status: offline
  • Ribbons : 14
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/06 07:32:54 (permalink)
529th
Picked up an EVGA 3080Ti FTW3 Ultra July 3rd  Set it all up, played some games the past couple of days.  Decided to see if I can get Resize BAR working.  Downloaded the latest 1.2.2.0 Precision X1, upon running it for the first time it said it needed to update the firmware and to press start.  Clicked start, the fans kicked up to what seemed to be 100% speed capability, red lights by the PSU VGA plugs lit up, the RGB turned off, and it started to update.  Is that normal?  Didn't even check what firmware I had before




Normal imo....it's changing the firmware/bios on the video card and the card loses its mind (per se) while it's happening.
 
as long as the card comes back up after a reboot you should be fine.
 
Have you updated your Motherboard BIOS too?
 

AMD Ryzen 5950x
Coolermaster ML360R RGB
Asus ROG Crosshair VIII Dark Hero
eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it)
Asus ROG Swift PG43UQ 4k Monitor
eVGA 1600W Supernova T2 PSU
32GB G.Skill 3600 DDR4 (2x16GB) Trident Z Neo
Corsair MP600 Pro 2TB (Boot)
Corsair MP600 2TB (Games/Data)
Phanteks P500A Case
 
Associate Code: J4T7H4SOBIGFO8F
529th
SSC Member
  • Total Posts : 576
  • Reward points : 0
  • Joined: 2009/08/18 17:38:02
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/06 07:48:23 (permalink)
transdogmifier
529th
Picked up an EVGA 3080Ti FTW3 Ultra July 3rd  Set it all up, played some games the past couple of days.  Decided to see if I can get Resize BAR working.  Downloaded the latest 1.2.2.0 Precision X1, upon running it for the first time it said it needed to update the firmware and to press start.  Clicked start, the fans kicked up to what seemed to be 100% speed capability, red lights by the PSU VGA plugs lit up, the RGB turned off, and it started to update.  Is that normal?  Didn't even check what firmware I had before




Normal imo....it's changing the firmware/bios on the video card and the card loses its mind (per se) while it's happening.
 
as long as the card comes back up after a reboot you should be fine.
 
Have you updated your Motherboard BIOS too?
 




Yes, I am running an Xtreme.. might switch to the EVGA Dark when released :D  , latest full release is F33.  Odd thing is I cannot get back into my bios after Resize BAR and Above 4G Decoding is enabled.
vodaje
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2021/06/01 07:23:27
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/06 18:38:03 (permalink)
Same thing here. I had to power cycle as my PC froze in this state (fans at 100% with the red lights on). After the restart I was able to update the firmware and it appears to be working now. Thought I’d be RMA a new card for a second.
Extermicide
New Member
  • Total Posts : 14
  • Reward points : 0
  • Joined: 2018/08/01 19:23:31
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/06 19:10:07 (permalink)
Are the benefits of having resizable bar really worth all of this hassle? curious.
DerpMagoo
Superclocked Member
  • Total Posts : 216
  • Reward points : 0
  • Joined: 2016/03/05 15:23:22
  • Status: offline
  • Ribbons : 2
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/07 08:35:28 (permalink)
So while I'm waiting to afford my new 3080 build, I was able to enable resizable bar for my current set up. (windows 11, asus z390-prime a, i9-9900k, rtx 3070 ti ftw3, corsair 850w gold, nvme ssd)
 
I got resize bar to work with a beta bios from Asus. My set up was pretty good for a week but then randomly would be having post issues. Comp display would either not turn on, or comp would try to post and reboot right away a few times. if I did a hard reset or saved settings in bios and restart I could load windows fine.
 
I know everything was working fine before the beta bios, so the first thing I tried was making sure my memory settings and stuff were fine - I have them on xmp. Still was having issues. I then disabled resize bar, even with the beta bios still on, and wow I boot no problem so far and I tested rebooting about 5 times so we'll see. So yeah, I'm not gonna enable this for this current motherboard, and if I keep having issues I'm gonna flash mobo bios back to the last stable build.
bubububububu
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2020/09/01 17:16:28
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/07 15:23:04 (permalink)
No BIOS availability yet for any -KL series cards. You're SOL if you want XOC bios or to convert to hybrid, but they're still happy to sell you the hybrid kit for the -KL cards!
DerpMagoo
Superclocked Member
  • Total Posts : 216
  • Reward points : 0
  • Joined: 2016/03/05 15:23:22
  • Status: offline
  • Ribbons : 2
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/08 00:15:17 (permalink)
bubububububu
No BIOS availability yet for any -KL series cards. You're SOL if you want XOC bios or to convert to hybrid, but they're still happy to sell you the hybrid kit for the -KL cards!




My 3070 ti ftw3 is a KL and I had rebar enabled in Precision... buuutttt it was glitchy and I flashed my bios to the last stable version tonight.
Appoll0
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2021/07/08 16:50:25
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/08 16:53:39 (permalink)
i can't find this. where is it exactly?
tc0566
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2012/03/05 16:14:55
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/08 18:30:23 (permalink)
Appoll0
i can't find this. where is it exactly?


Where is what?
 

 
Use my Associate code to save money on your next purchase!
K8KDH9WX5PDC7ZN
And for all those that use it THANK YOU

Sajin
EVGA Forum Moderator
  • Total Posts : 46102
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 198
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/09 15:08:39 (permalink)
Just installed the rebar vbios on my 3090, and updated my trx40 motherboard bios, and didn’t even get an increase in cyberpunk. 😂

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
haulinaz2316
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2021/05/07 07:56:43
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/10 16:43:38 (permalink)
I am wondering what workloads/apps benefit from the resizeable bar the most. Anyone have a guess?
 
Also, are there some workloads that would benefit from it being disabled?
akafats
Superclocked Member
  • Total Posts : 203
  • Reward points : 0
  • Joined: 2020/10/30 19:30:34
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/11 12:43:18 (permalink)
Hay all, Does anyone know if there is a kingpin 1000W Resizable Bar version?
telehog
iCX Member
  • Total Posts : 396
  • Reward points : 0
  • Joined: 2018/12/05 13:48:52
  • Status: offline
  • Ribbons : 1
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/11 16:48:23 (permalink)
akafats
Hay all, Does anyone know if there is a kingpin 1000W Resizable Bar version?


Email Kingpin with serial # of GPU and Vince will send it to you ask for the new classified tool to go with it. 
Vince@kingpincooling.com
akafats
Superclocked Member
  • Total Posts : 203
  • Reward points : 0
  • Joined: 2020/10/30 19:30:34
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/11 18:06:47 (permalink)
Just sent the mail.
Thanks for the info.
jaro_irl
New Member
  • Total Posts : 100
  • Reward points : 0
  • Joined: 2021/07/13 19:23:16
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/07/14 01:24:16 (permalink)
Oh cool :)
Page: << < ..3132333435.. > >> Showing page 33 of 37
Jump to:
  • Back to Mobile