EVGA

AnsweredEVGA X79 DARK WATERBLOCK *prototype finished!*

Page: << < ..1617181920.. > >> Showing page 16 of 38
Author
Acesi7
iCX Member
  • Total Posts : 260
  • Reward points : 0
  • Joined: 2010/09/17 01:28:09
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/06 13:56:52 (permalink)
iamSneaky
For those running single or dual GPU's I am sure it would work OK but 3 or more may be a bit cramped.
TBH Nate, I am interested in the Chipset block but I would be much happier with the original design.
If you are not happy with the shape, just make the delrin top over sized and more square shaped
(don't match the shape of the copper base). I think I mentioned this before. :-)
Something like EK have done with their RIVE block?:





Nateman, those blocks looks sexy!
 
As for the chipset block, as iamSneaky has mentioned, this is what I had in mind. Something more squared off, even if it is just the delrin/POM top.
 
You could slightly round the edges more like the VRM block. However, to my eye, the VRM block is very square (which I love), and I'd love to see the same sort of shape/style on the Chipset block. Maybe just like the above block, but with slighty more rounded edges, like the edges on the VRM block, but still retaining it's square shape.
 
Tried to do it in paint and it just became very messy. Haha, can have another crack at it if you need when I've got more than 5 minutes.

EVGA X79 Dark|Intel 3960X - OC'd to 4.6Ghz|3-way EVGA 780 Classified w/HydroCopper block and backplate
Corsair Dominator GT - 1600mhz C8|Sandisk Extreme 480gb|OCZ Vertex 4 512Gb|Seasonic X-1250|TJ-11
Max Keyboards NightHawk X8 Custom|Razer Ouroboros|Overlord Tempest 1440p 120hz Monitor
3D Mark - Firestrike 23362 (2nd PSU soon for better scores...)
frankythecat
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/03/16 08:56:16
  • Location: Germany
  • Status: offline
  • Ribbons : 2
Re:EVGA X79 DARK WATERBLOCK 2014/01/06 14:26:01 (permalink)
nateman_doo
Thanks!

 


Very nice picture, when you want it send out?
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 07:41:17 (permalink)
Your more squared off corner:

 
I am going to roll with this design and see how well it works.
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 10:22:15 (permalink)
All blocks (minus the ones going down under) have shipped.
chememan
SSC Member
  • Total Posts : 816
  • Reward points : 0
  • Joined: 2009/05/21 12:23:19
  • Status: offline
  • Ribbons : 2
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 11:02:01 (permalink)
I sent you a PM about a week ago asking how to get on the second batch, any update?

4930K @ 4.6 X79Dark + 4x4 G-Skill 1900-C9 + 780Ti Classified + 840 Pro SSD + AX1200 + HAF 932 
 
W3540 @ 4.4g  on H2O + EVGA E760 Classified + 3x2GB G-Skill Perfect Storm 2133 + 
2x EVGA GTX480SC in SLI on H2O  + Intel X25-M 160 G2 + WD Velociraptor 300 + Corsair AX1200 + HAF 932
 
3570k 4.5 on H2O + Z77FTW + GTX480SC + G.SkILL 1800 + Intel X25M + Corsair HX850 + HAF 932

3770k 4.6 on H20 + Z77FTW + GTX480SC + G.SkILL 1800 + Intel 520 + CM1000+ HAF 932

HEATWARE  

nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 12:01:55 (permalink)
Your already on the list ;)
I have one more possibility open if I don't hear back from someone.
chememan
SSC Member
  • Total Posts : 816
  • Reward points : 0
  • Joined: 2009/05/21 12:23:19
  • Status: offline
  • Ribbons : 2
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 12:14:45 (permalink)
Thanks!

4930K @ 4.6 X79Dark + 4x4 G-Skill 1900-C9 + 780Ti Classified + 840 Pro SSD + AX1200 + HAF 932 
 
W3540 @ 4.4g  on H2O + EVGA E760 Classified + 3x2GB G-Skill Perfect Storm 2133 + 
2x EVGA GTX480SC in SLI on H2O  + Intel X25-M 160 G2 + WD Velociraptor 300 + Corsair AX1200 + HAF 932
 
3570k 4.5 on H2O + Z77FTW + GTX480SC + G.SkILL 1800 + Intel X25M + Corsair HX850 + HAF 932

3770k 4.6 on H20 + Z77FTW + GTX480SC + G.SkILL 1800 + Intel 520 + CM1000+ HAF 932

HEATWARE  

Acesi7
iCX Member
  • Total Posts : 260
  • Reward points : 0
  • Joined: 2010/09/17 01:28:09
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 13:48:24 (permalink)
That looks heaps better mate. In my opinion that's perfect!

EVGA X79 Dark|Intel 3960X - OC'd to 4.6Ghz|3-way EVGA 780 Classified w/HydroCopper block and backplate
Corsair Dominator GT - 1600mhz C8|Sandisk Extreme 480gb|OCZ Vertex 4 512Gb|Seasonic X-1250|TJ-11
Max Keyboards NightHawk X8 Custom|Razer Ouroboros|Overlord Tempest 1440p 120hz Monitor
3D Mark - Firestrike 23362 (2nd PSU soon for better scores...)
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 16:12:03 (permalink)
Great!  Glad you like it.  I am going to start working on the tool plate to make these.  That will take me a few days.  batches will be possibly 6 at a time.
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 19:30:54 (permalink)
OK...so im off duty for a few days.  Broke my helical coupler.  Have to order another one, and some other parts while I am doing a tear down.

nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 19:33:10 (permalink)
But... I will leave you with this parting shot of the subzero temps that are racking up my heating bill!:

 
TECH_DaveB
EVGA Alumni
  • Total Posts : 4661
  • Reward points : 0
  • Joined: 2008/09/26 17:03:47
  • Status: offline
  • Ribbons : 46
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 19:44:31 (permalink)
OK, I am still in, for both the VRM and the SB block.  I prefer the current incarnation that you have above, really was not in for the enter/exit between cards, even if it would fit.  Also, Nate, please disregard the pic I sent you earlier, I see we were already kinda going in the same direction as it was.  Great minds think alike I guess.
 
BTW, EVGATech_MattM was also wanting in on this wave, he asked me to pass it along too.
 
Is an SB block absolutely necessary, not really, but I definitely want to Get it Colder as well.  And if it is covered and doesn't get good air flow it does get warm, so again I would definitely like to get one.
 
Also, a thought I had, for the tops, rather than Delrin, maybe a clear, or smoked clear plastic, I think it would fit with the overall look of the Dark.  I think a smoked grey clear top would look awesome, just a thought, and yes, it is meant PURELY aesthetically.
 
Far and away the pic you have on this page is the best one so far.
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 20:36:49 (permalink)
If MattM gets an order in, he is going to bump Jacob off the list ;)  I will be in touch tomorrow.
 
I am going to start accepting orders for the chipset blocks, and the VRM's.  Start-up a que or something so I can order the raw material.  Just deposits for raw material.  More tomorrow.  I have my machine torn down awaiting parts.  Thankfully it didn't happen on a friday when I can't order stuff.
Acesi7
iCX Member
  • Total Posts : 260
  • Reward points : 0
  • Joined: 2010/09/17 01:28:09
  • Location: Melbourne, Australia
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 20:38:08 (permalink)
Oh no good Nateman. This must be costing you a fortune in tooling and parts. You've had quite the bad run of broken bits, screen and now this coupler. Well take a break, put your feet up and have a few drinks! Hopefully not frozen ones.
 
Take care mate.

EVGA X79 Dark|Intel 3960X - OC'd to 4.6Ghz|3-way EVGA 780 Classified w/HydroCopper block and backplate
Corsair Dominator GT - 1600mhz C8|Sandisk Extreme 480gb|OCZ Vertex 4 512Gb|Seasonic X-1250|TJ-11
Max Keyboards NightHawk X8 Custom|Razer Ouroboros|Overlord Tempest 1440p 120hz Monitor
3D Mark - Firestrike 23362 (2nd PSU soon for better scores...)
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/07 21:00:39 (permalink)
Start PM'ing me some paypal addresses.  I will send invoices in the morning.  At least I will have the raw materials. 
Kolich
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2008/08/16 14:39:28
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 03:25:28 (permalink)
nateman_doo
Start PM'ing me some paypal addresses.  I will send invoices in the morning.  At least I will have the raw materials. 


Nateman, i sent to you pm, please check it and pls send me invoice.
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 06:31:30 (permalink)
Invoices going out.  I have 1 extra spot for a Vreg block left.
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 06:33:20 (permalink)
chememan
Thanks!


wow... that was quick on the invoice.  I would have thought Kolich would have beat you to the punch ;)
Kolich
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2008/08/16 14:39:28
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 06:40:05 (permalink)
nateman_doo
chememan
Thanks!


wow... that was quick on the invoice.  I would have thought Kolich would have beat you to the punch ;)


hehehehehe =)))))))
thx Nateman! im already paid :)
ask me please next:
what price for shipping to Foxoboro MA 02035 or Russia Ryazan 390035?
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 06:47:10 (permalink)
foxoboro MA?  or Russia?  BIG difference.  Shipping to MA is only 400KM's away.  practically local. 
Kolich
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2008/08/16 14:39:28
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 06:49:47 (permalink)
nateman_doo
foxoboro MA?  or Russia?  BIG difference.  Shipping to MA is only 400KM's away.  practically local. 


i know. i have shipping address in USA and im live in Russia.
on shipping address im ordering any orders and then shipping to Russia.
if price will be low for shipping to Foxboro, i choose it, if similar-im choose shipping to Russia.
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 06:52:35 (permalink)
either way... if your sitting in Russia right now, it has to get to you. 
You will pay for shipping twice (or if you have family in MA that will ship to you for free) 
Kolich
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2008/08/16 14:39:28
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 06:57:05 (permalink)
nateman_doo
either way... if your sitting in Russia right now, it has to get to you. 
You will pay for shipping twice (or if you have family in MA that will ship to you for free) 


Good!!!!please ship it to MA, because for free :)
if you ship it for free to Russia, you can ship it there :)))
frankythecat
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/03/16 08:56:16
  • Location: Germany
  • Status: offline
  • Ribbons : 2
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 07:42:13 (permalink)

Perhaps you will help this photo.
 
 
Kolich
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2008/08/16 14:39:28
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 07:49:38 (permalink)
nateman_doo
 
I have EK Supremacy Full Nickel waterblock. i mean with your wb will be fit?


nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 08:02:22 (permalink)
frankythecat

Perhaps you will help this photo.
 
 


AWESOME!!!  there should be NO interference then.  
BTW, do you have calipers?  or a semi-accurate way to measure how much the CPU block sticks out from the CPU socket?  By out, I mean the distance past the CPU socket towards PCI-E 1?  Looks like a few millimeters at best.
 
If you draw a 0.63" circle from the closest CPU bolt, that is when it would make contact:

That figure is in inches.
frankythecat
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2007/03/16 08:56:16
  • Location: Germany
  • Status: offline
  • Ribbons : 2
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 08:48:34 (permalink)
You mean this distance!I think it will fit.
 

 
That does not make me worry, but I want to use this revolver Rigid Compression Fitting, which is probably closely.
 


 
 
 
 
 
 
 
 
 
 
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 09:17:00 (permalink)
Frank.. standby.  I will e-mail you a pdf print-to-scale.  cut it out on paper, and put it on your board and take a picture. 
I should ask if you have a printer first?
nateman_doo
Omnipotent Enthusiast
  • Total Posts : 8452
  • Reward points : 0
  • Joined: 2008/01/16 16:16:54
  • Location: NOT the Jersey shore
  • Status: offline
  • Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 09:22:54 (permalink)
I just e-mailed frank and Kolich a pdf
 
Kolich
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2008/08/16 14:39:28
  • Status: offline
  • Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK 2014/01/08 10:04:17 (permalink)
nateman_doo
I just e-mailed frank and Kolich a pdf
 


i mean it will be perfect fit!
thx Nateman!
may be you can engrave brand EVGA on chipset WB?
Page: << < ..1617181920.. > >> Showing page 16 of 38
Jump to:
  • Back to Mobile