hallowen
Back again to SLI and Managed to gain +106 points in 2X Port Royal.
https://www.3dmark.com/pr/129939
 

Damn your sneaking up on that 21000 mark now, impressive !!!!

hallowen
Thanks, For whatever reason (at least for me) I seem to get better results benching with 2X KingPins.

Are you using the auto voltage in classy tool or setting your own?

OK, i got the second kingpin block installed and ran a few tests of port royal, i can't even hardly get the chiller to cool less then 5C now, but still ended up with some good results. 
#4 in Port Royal with 2 cards, 21,208   http://www.3dmark.com/pr/130077 
Just to make sure it wasn't a fluke score ran a few more tests. 
21,150 http://www.3dmark.com/pr/130066 
21,102 http://www.3dmark.com/pr/130102  

Cool GTX
Nice 

Thanks !!!

Very nice DW.  

GTXJackBauer
Very nice DW.  

Thanks @GTX

t0ot0o

dwexpress
OK, i got the second kingpin block installed and ran a few tests of port royal, i can't even hardly get the chiller to cool less then 5C now, but still ended up with some good results. 
#4 in Port Royal with 2 cards, 21,208   http://www.3dmark.com/pr/130077 
Just to make sure it wasn't a fluke score ran a few more tests. 
21,150 http://www.3dmark.com/pr/130066 
21,102 http://www.3dmark.com/pr/130102  

Awesome work man. Great scores and great looking rig! Them KP's really putting in work.
 
On a side note... Got a real nice delivery yesterday
 

Oh gosh, looks like your getting serious!!!!!

-VSS-
@0.900v 

Welcome to the Forum
Why are you down clocking?

@dwexpress

Was it this thread where you discussed the optimal thermal pad thicknesses that you discovered? What was the optimal thickness you found again? It was for the VRAM I believe?

Playing around with classy tool, is 1.31 on the core ok? Never go over 52c as of yet, power temp is 50c never goes past 55c benching for 2.2ghz without classy tool it crashes but more power it stays

dwexpress

HawkOculus
@dwexpress

Was it this thread where you discussed the optimal thermal pad thicknesses that you discovered? What was the optimal thickness you found again? It was for the VRAM I believe?

i ended up using 1.0 mm on the memory die's with thermal paste and used 1.5 mm everywhere else. 1.25 mm is supposed to be what is on the memory dies stock. Others used the 1.0 mm and didn't get along very well with it though. 

Appreciate it. I still haven’t decided if I’m going to put my waterblock on or not.

Oh snap!  Nice scores out of everyone.
Spent some time at -120c.
 
Sandbagging for now probably post some scores this friday. Really thinking about sli with a 2nd KPE on x299.
 

Myersjames93
for the ones running hydro copper on the king, what's your guys temp differences compared to when u was on stock 240 hybrid, and if its good temp change can you tell what radiator size your using, not chilled water just regular loop is preferred 

I posted part of that info under > Post #59 (Regular Loop)
What's the Lowest Room Temperature that the EVGA RTX 2080 Ti K|NGP|N HYBRID Cooler can run
EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! have most of the Temps still with the Hybrid Cooler installed.
Going to take me a long time to go through 75 pages to find what you are asking for.
I Created this Thread 2 months ago for Members who have removed the Hybrid Cooler so it has been awhile since I had my Hybrid Cooler installed.
(Still Looking)
 

Myersjames93
ok I understand.. im debating saving little  and picking up a hydro, but here's my oc with stock 240 hybrid http://www.3dmark.com/spy/8070101

Some like the Hydro Copper and some do not.
I have no real problems with mine.

The stock kingpin aio cooler is no doubt a good one, probably the best evga has had with the newer style pump and 240mm radiator. Putting a little better fans or going to push/pull on the radiator makes it hard to beat even with the hydro copper block. If you're not doing benchmarking or trying to really push overclock the hydro copper won't gain you much.