Few more fittings arrived today so i can re arrange a few runs of tubing -

I was originally going to use a OCZ Agility SSD to replace my Intel 520 series SSD that is re located in to the interior of my case but -

I stumbled upon this SSD and it just might be that much sexier.



This is mainly for show but i will load it up with music and pics to get some use out of it.

nookie420

hurry up with your build, you started before me, and I had to RMA 2 video cards

 
LOL i should be done soon and i just ordered a Koolance dual pump bay res as well to help clean things up in the case a little.

After months of changing hardware out,testing the computer,and just trying to make any improvements i can i have come up with some final changes -

Ordered -

Koolance RP-452X2 Dual 5.25in Reservoir Rev.2.0 - This will allow me to eliminate my internal tube res,pump bracket,pump out of view completely.



Swiftech MCP655 With Speed Control - I will be installing this in edition to my current D5 pump in the Koolance bay res for maximum pumping power.



Corsair Air Series AF140 Quiet Edition High Airflow 140mm Fan - This will replace the Apevia 140mm UV green led fan installed in the mid panel.

Those should work nicely. I put in a Swiftech dual bay dual pump 35x in mine real happy with it!
You can see it in my Mods rig page.

 

I will be adding a Coldzero Bay Side Plate as well to cover all the latching mechanisms and i have 2 options -

Hexx -



Or Open Frame ? -

Finally decided and placed my for a Coldzero Bay Side Cover (Open Frame) -

This will cover up all the 5.25'' bay latching mechanisms and give a real clean look when ever i remove the side panel.



Like this -


 
Decided on the following MDPC sleeving for my 8 pin power,24 pin power,4X 6 pin pci-e power connectors -

TOXIC GREEN -



AQUAMARINE-BLUE MKII -

I chose these blue because it comes close to matching the rings on all the Corsair SP fans in this build.



The Toxic Green will be the main sleeving but i may incorporate some of the Aqua Blue as well.

Ordered a few things tonight so i can make some changes and get closer to finishing this build -

Durelene PVC Tubing Clear 1/2in. ID x 3/4in. OD - 30'

I have a long tube run from my top GPU right port to the Koolance bay res so i figured a Koolance quick disconnect would come in handy along this run.

Koolance QDC (High Flow) No-Spill Shutoff, Female



Koolance QDC (High Flow) No-Spill Shutoff, Male



Mayhems Pastel Mint Green Concentrate 250ML -



Corsair Air Series AF140 Quiet Edition High Airflow 140mm Fan -

I need this for the HD cage 140mm mount since i re located the AF140mm that was there to the mid panel 140mm mount.



I also ordered my custom 670 FTW back plates as well from Coldzero but i won't show them until they arrive!

Installed the Koolance res to check for leaks and function -

I have the pump at level 3 right now and i get vibration noise so i will work on that issue when i install the 2cd D5 pump.

Going to replace all the 6MM Phillips head screws on the internal EX360 rad with these -

I love the look of these oppose to a Phillips head and should add more of a premium look.



I would like to replace the exterior 30MM Phillips head screws holding the rad to the case but Frozencpu does not carry that size in the above style.

Aren't you over at OCN as well? lol

Small update for now -

I installed a few of the Blue screws on the mobo already and they fit perfect and look great.I will install the rest of them once i break down the loop again in a week or 2 and take pics.





The stock screws the EX360 came with have a wider head so they did chip some paint off but i do like this style of screw better -

I received the render for the custom GPU back plates i was working on with Coldzero -

Should have them with in 2 weeks then i can start another overhaul on this build.