I have decided to ditch my Corsair C70 case because i needed something much larger and more water cooling friendly so i felt this was the best route for me.

Case -

Corsair 800D





Intel DZ77GA-70K
Intel 3770K
Corsair Vengeance 16GB
Intel 520 series 240 gig SSD
WD Caviar Green 2TB
Evga GTX 670 FTW X2
Corsair AX850
Corsair SP2500 2.1 Gaming Speakers
Corsair Vengeance K60 Gaming Keyboard
Corsair Vengeance M60 Gaming Mouse
Corsair Vengeance 2000 7.1 Gaming Headset
Windows 7 64 Bit
Creative Sound Blaster Recon 3D
Samsung TOC 27'' 1920x1080
Sony Optical Drive

Water Cooling Hardware List -

XSPC RayStorm High Performance Acetal CPU Liquid Cooling Block

XSPC EX360 Crossflow Triple 120mm Low Profile Split Fin Radiator    

XSPC EX360 Multiport Triple 120mm Low Profile Split Fin Radiator

XSPC Razor Nvidia GTX 680 Full Coverage VGA Block X2

(UN)Designs D5 Pump Z3 140mm Fan Bracket - Black

Enzotech SLI Bridge Kit X2

Bitspower Premium Male G1/4" Matt Black Aqua-Pipe I Fitting

Bitspower G1/4" Anti-Cyclone Adapter - Black Matte Finish

Swiftech MCB-120™ Revision 2 "Radbox" Radiator/Fan Housing

Swiftech MCP655 Special Edition 12 VDC Pump With Speed Controller

Bitspower  Water Tank Z-Multi 150 - POM  - Current

EK Spin Reservoir Acrylic - Removed

XSPC Dual 5.25" Bay Reservoir (Alu Front)  - Removed

Swiftech Maelstrom 5 1/4" Dual Bay Basic Reservoir - Removed

Tubing -

Feser - 1/2" ID/3/4"OD - UV Acid Green 30'

Fan Controller & Fans -

Sunbeamtech Rheosmart 6 Channel Fan Controller

Fans -

Corsair SP120 High performance High Static Pressure X6
Corsair AF120 Quiet Edition X1
Corsair AF140 Quiet Edition X1
Apevia 140mm UV Green

Fittings -

Enzotech 90 Degree Rotary Compression Fitting Matte Black 1/2"x3/4"  X6

Enzotech Compression Fitting Matte Black 1/2"/3/4" X6

Enzotech 1/4 Threaded Stop Plug X16

Enzotech Male to Male G 1/4 Threaded Coupler - Matte Black X2

Enzotech Male to Female G 1/4 Threaded Adapter - Matte Black X2

Enzotech Male to Female G 1/4 Threaded Extender - Matte Black

Enzotech Drain Plug G 1/4 Threaded Cap - 1/2" Barb - Matte Black 

Fluid & Accessories - Mayhems UV Green/Mayhems UV Yellow/Green dye

Accessories -

Cold Zero PSU Cover Plate - Matte Black

Bitspower UV Mesh Radguard 120mm  - UV Green X4

8-Pin (EPS12V) Extension Cable 12 Inches - Sleeved In UV Green

Mod/Smart Dual LED - Pre-wired with 4-Pin Connector 3mm - Blue - Sleeved In UV Green X2

2 x BitFenix 3-pin to 3 x 3-pin Fan Adapter Cable - 60cm - Black Sleeved

Bitspower Flow Indicator - Clear/Black/Matte Black

Bitspower Single Luxury Tube Clamp For Tube OD 3/4in. - Black X4

Bitspower - D5 Mod Pump Top V2 (POM Version)

Bitspower D5 / MCP655 Mod Kit - Matte Black Finish

OKGEAR 36'' inch SATA 3.0 Cable - Straight to Straight - UV Green

OKGEAR 24'' SATA 3.0 Cable - Straight to Right Angle - UV Green

Serial ATA Power Cable 12" - Sleeved In UV Green

XSPC LCD Display Temperature Sensor - Green

XSPC 5.25" Drive Bay Temperature Sensor Display Frame

Molex Extension Cable 36" Black Sleeved X6

MaxFinder Triple Braided 3-Pin Fan Extension Cable 3 Pack 60cm - Black X4

Bitfenix Alchemy Connect 30 LED Light Strip 600mm - Blue X2
 
Corsair Individually Sleeved Modular Cable upgrade kit for the Professional Series AX850 PSU - Blue

Water Cooling Upgrade Total Cost -

$1,979 - This is minus all shipping and includes hardware Ive have bought and since removed and replaced.

Nice!

Mr.MattyV

Very nice. Where are you putting that second 3x 120 radiator?

Its being installed on the back of the case sir.
 
I can mount the radiator to the swiftech radbox then use 2 90 degree fittings and come in through the supplied grommets on the back of the case.

Ordered a few more things tonight -

Bitspower D5 / MCP655 Pump Mod Kit In Matte Black

XSPC Dual 5.25" Bay Reservoir

Various Enzotech fittings in Matte Black

PrimoChill PrimoFlex PRO LRT Tubing 1/2"ID 3/4"OD In Clear 12'

Mayhems Aurora Extinction Green Dye

So more updates coming this week!

Looking forward to the finished product. I have two of these 800D builds. Both Watercooled...
 
May I make a suggestion? I found that replacing two of the factory 140's is required. They are HORRIBLE. 
 
 
I now use this one for the bottom fan that pulls the air from the bottom of the case (By the PSU) http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_316_849&products_id=28570&zenid=72b2c13dc8156fb24019441f204f0a92
 
And I use this one for the rear exhaust http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_316_849&products_id=28571&zenid=72b2c13dc8156fb24019441f204f0a92
 
Finally I just installed this Corsair unit (There are two versions, the one I got is the one required ad there is almost no clearance from the case where it mounts) to pull air from the seems in the front of the case. So it pushes air towards the door/cover that the black fan can use in addition to the bottom screened air. http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_49_1050&products_id=34312&zenid=72b2c13dc8156fb24019441f204f0a92
 
I am extremely pleased with the results. My temps dropped 7c by doing this. 

ooh, that looks nice.  How far down does the rad go on the case?

A few more things arrived today but unfortunately my Enzotech fittings are being dropped shipped from the manufacturer so i wont have them until next week -

Mayhems Aurora Extinction Green Coolant Concentrate -



XSPC Daul 5.25'' Bay Res & 12' of Primochill 1/2''x3/4'' Clear tubing -



Side Note -

I had trouble as expected sliding the bay res in because the slots on each side of the 5.25'' bay are a little 2 wide so i need to Dremel them down a bit tomorrow.

All fans and swifttech radbox mounted on the rear rad -


 
Mounted Permanently -



 

This is looking very nice! I've move dit to mods rigs as it's now more suited to that part of the forums.

I dry fitted some tubing today to get an idea of how to route everything off the rear mounted rad -





I can bring another feed to the top video card and that will complete the loop from the rear rad but if any 1 else has a better idea then feel free to share it.

zophar

Very nice build so far. I loved my 800D case. It's awesome for a water cooled build.

TY sir hopefully i won't disappoint.

Tasty hardware incoming!

I have decided on a lighting scheme that will be low profile but still have a strong impact so with that said -

Bitfenix Alchemy Connect 30 LED Light Strip - Blue X2



4-Pin Molex Powe Adapter Cable w/ Remote On/Off Toggle Switch - 36" - To have full control of both LED strips



Few others items that are being purchased tonight to help finish this build up -

Corsair Air Series AF140 Quiet Edition High Airflow 140mm Fan - To replace the fan that blows air in to the HD cage



PrimoChill Anti-Kink Coils - Gloss Blue - Just in case i need some



I am still trying to decide if i want to go with a single bay fan controller or just order another Corsair link cooling node so i can control everything from the desktop.

A few more items arrived today -

Enzotech SLI Bridge Kit  & KillCoil -



Tons of Enzotech Fittings -



Mayhems UV Green Fluid -



3 Pin Sleeved Extension Cables For The Rear rad Fans -



Bitspower MCP655 Mod Kit In Matte Black -



Test Fit With 2 Enzotech Matte Black Compression Fittings -



I have a bunch more stuff coming next week so i can get closer to getting this thing running again so stay tuned!

This build is coming along very nicely 

Hey
Would you recommend the Lamptron Inverterless?
How bright is it from a scale of 1-10?
Thanks