Few more items arrived today -

EX120mm rad that will mount to the rear 120mm exhaust section -



Danger Den tube cutter because scissors aren't cutting it lol -



Additional Enzotech stop plug i needed, Bitspower premium 3/4'' OD tube clamps(No Zip Ties) -



Bitspower Flow Indicator Plexi/Matte Black -



UN 140mm fan bracket(1 part of the puzzle to mount the D5 pump) -



UN 3G bracket(2cd part of the puzzle to mount the D5 bracket) -



Bitspower Plexi UV Green filtered 120mm rad grill -



Bitspower Plexi UV Green filtered 360mm rad grill -
 
This thing pops like a mofo under UV light and i love the quality on it.
 

what screws did you use to mount the fans and rad to the top of the case?

I will be changing this UN 140mm bracket out for a black 1 but this is the cleanest and most balanced way i could mount the pump given the 2 brackets i had -



XSPC EX120 rad mounted to the rear exhaust -

The best place to mount the Bitspower flow indicator seems to be above the top gpu left output. I did a few dry fits with different lengths of tubing but i don't like the way the tubing leans back due to the weight so i found a solution -



I can mount this to the top left gpu port then thread the Bitspower flow indicator right in for much added stability.

¬_¬ you are giving me um...... inspiration about the ssd placement.... lol.....
 
agility 4 huh, pretty nice drive, i was gonna say samsung 840 if you haven't ordered the new drive yet but, the agility's color scheme fits nicely with your setup.
 
 

Ordered my custom PSU plate cover and here is how it works -

http://www.youtube.com/wa...ed&v=mMEEVpRgLjA#!

Tons of other things ordered as well(some for function and some for flash) -

Bitspower Premium Male G1/4" Matt Black Aqua-Pipe I Fitting - This will replace the silver aqua pipe that comes stock in the Bitspower 150 Z-Multi water tank.



Bitspower G1/4" Anti-Cyclone Adapter - Black Matte Finish - This will replace the silver anti-cyclone adapter that comes stock in the Bitspower 150 Z-Multi water tank.



Bitspower UV Mesh Radguard 120 (1 x 120mm) - UV Green X3 - These will cover and protect my 360 interior mounted roof radiator and also add a nice visual effect.



(UN)Designs Pump Z3-Bracket (for Laing D4/D5/DDC Pumps) & 140mm Fans - Black - I currently have the deep blue version but i feel the black version will blend it better.



Enzotech Male to Male G 1/4 Threaded Coupler - Matte Black X2 - I need 1 to mount the Bitspower water tank to the pump and 1 to thread the Bitspower flow indicator in to a Enzotech thread adapter.



Enzotech Male to Female G 1/4 Threaded Adapter - Matte Black - This will thread directly in to 1 of my top GPU ports to add some stability to the Bitspower flow indicator that will be threaded in to it.



Enzotech Male to Female G 1/4 Threaded Extender - Matte Black - I am using this because the discharge OUT port i am using on the pump will sit to close to the Bitspower water tank when mounted. I will have more space to work with now after i thread a 90 degree rotary barb in to this.



ENZOTECH BSLI-1 Fittings Package for SLI Setups - This will add another bridge to the video cards for added stability and flow.



8-Pin (EPS12V) Extension Cable 12 Inches - Sleeved in UV green and the female connecter will be UV green as well.

24-Pin (EPS12V) Extension Cable 12 Inches - Sleeved in UV green and the female connecter will be UV green as well.

BitFenix 3-pin to 3 x 3-pin Fan Adapter Cable 60cm - Black Sleeve X2 - I needed a 3 pin set so i can send all my 3 pin fan cable extensions directly to the fan controller for a cleaner look.

Mayhems Dye - 10ml UV Yellow/Green - I plan on adding a few drops to enhance the Mayhems UV green concentrate i will be using.



Mod/Smart Dual LED - Pre-wired with 4-Pin Connector 3mm - Blue X2 - This will be sleeved in UV green and replace the current LED's plugged in to my Raystorm cpu block.

yeah, my hotswap bay doesn't read my SSD either, it's a real freakin shame.  I was gonna try and mount it in the bottom bay. 

Here is how i have it set up and i love how well i was able to integrate the Bitspower flow indicator.

The Enzotech threaded adapter worked so well to stabilize it.





Going to flush the res up and make a few changes tonight.

Looks awesome, excellent job!

im really digging those UV green bracket/pieces/wuteveritscalled, it DOES make your parts pop a lot.

I don't like the angle of the feed coming from the pump discharge to the top right GPU port but there is a slight issue -

I have a spare Enzotech 90 degree compression fitting but when i try to thread it in that port it hits the GPU back plate so i have to raise the fitting up some with 1 of these.

Enzotech Male to Female G 1/4 Threaded Extender - Matte Black





This will give me enough space so the fitting won't hit the back plate and i can match the angle of the tubing to flow with the angle of the drain plug feed.

 
I recently ordered a PSU plate cover from Coldzero.com which makes all kinds of custom parts for the Corsair 800D/700D so i was inclined to look in to another custom part from them -

Front panel with 120mm fan.

This is a stealth DVD-RW version which i will not be using but it gives an idea of the design and craftsmanship. I already have a Sunbeamtech 6 channel fan controller mounted to the bottom of my front panel so this will be a custom part. It needs to take up 4 slots only and still offer the capabilities to mount a 120mm fan. I emailed them about this and i am confident it can be done so this will be 1 of the final editions to this build. 

Front page updated with -

Accessory list, current and removed hardware, updated total cost.

I ordered a few more fittings so i can re locate 2 separate tubes in my loop and also raise the tube res up a little bit -

Enzotech 45 Degree Rotary Fitting Male/Female  - Matte Black X3



Enzotech Male to Female Threaded Adapter - Matte Black



Enzotech Male to Female Threaded Extender - Matte Black



I have also decided on new Ram finally since my previous Corsair Vengeance 16 gig set is useless now covered in Bitspower water block shrouds -

Corsair Vengeance LP(Low Profile) In Blue

Thanks i should be done with in a few weeks i just need to make some adjustments and install a few more items.