Xinoxide
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2020/10/09 15:25:11
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/14 14:27:53
(permalink)
I measure my elite status in power consumption.
I am.... 5th for SLI and 15th for single card so far.
Im trying to get my cards operating full pot but its not easy on ampere.
|
kraade
CLASSIFIED Member
- Total Posts : 2433
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/14 16:32:29
(permalink)
I'm stuck at 15190, I turned a quick 15387 on opening day but everything I do now seems to go backward, the more I play the less I get, classified tool included, do i need the new version of the classified tool? mine dates back to October..
post edited by kraade - 2021/07/14 16:33:34
|
redteamgo
SSC Member
- Total Posts : 803
- Reward points : 0
- Joined: 2013/11/16 13:20:08
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/15 05:49:19
(permalink)
My hybrid pump failed yesterday. Got not quite a month out of it used for casual gaming only
CPU: Intel 12900K EK 1700 Quantum Mag AcetelGPU: EVGA 3090 KPHCMB: EVGA Z690 DarkPSU: EVGA SuperNOVA 1600 P+Memory: G.SKILL Z5 6600mhz XMP3NVME: Samsung 980 Pro Gen 4 1TB, Gen 3 970 1TBCooling: MO-RA3 420 P/P 8x200mm Noctua HS PWM, Dual D5Case: Fractal Design Define 7 MOD Rigs!!!
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/15 13:48:17
(permalink)
kraade
I'm stuck at 15190, I turned a quick 15387 on opening day but everything I do now seems to go backward, the more I play the less I get, classified tool included,
do i need the new version of the classified tool? mine dates back to October..
Did you change the driver since? My ftw3 performs better on the 4.61 then on 4.7x for example
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
kraade
CLASSIFIED Member
- Total Posts : 2433
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/15 17:03:09
(permalink)
elbramso
kraade
I'm stuck at 15190, I turned a quick 15387 on opening day but everything I do now seems to go backward, the more I play the less I get, classified tool included,
do i need the new version of the classified tool? mine dates back to October..
Did you change the driver since?
My ftw3 performs better on the 4.61 then on 4.7x for example
I went to 4.711 the day before I installed the card, so I have not changed it, The card will pull all of those 523w in LN2 bios but doesn't seem to change my score anymore than just running at or around 480w with a basic overclock, is there such a thing as burning off the newness lol.
|
jnayna
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2021/05/10 08:40:17
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/16 05:37:54
(permalink)
Not Kingpin, but figured share FTW3 Ultra score here: 15343 Think it's as high as I'll get due to power limits. Temps are low, but still core is getting throttled. Edit: Can't post links yet but score result is pr/1129800
post edited by jnayna - 2021/07/16 05:40:35
|
telehog
iCX Member
- Total Posts : 414
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/18 15:41:05
(permalink)
|
kraade
CLASSIFIED Member
- Total Posts : 2433
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/18 16:40:54
(permalink)
What is the best way to get past the Spike when the craft is enetering the hanger, My clocks on everything shoot up GPU 2290 CPU 5.4 mem too
|
bavor
SSC Member
- Total Posts : 995
- Reward points : 0
- Joined: 2008/02/20 21:24:43
- Status: offline
- Ribbons : 6
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/22 23:11:37
(permalink)
|
bavor
SSC Member
- Total Posts : 995
- Reward points : 0
- Joined: 2008/02/20 21:24:43
- Status: offline
- Ribbons : 6
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/22 23:17:53
(permalink)
redteamgo
My hybrid pump failed yesterday. Got not quite a month out of it used for casual gaming only
The pump on my first Kingpin Hybrid failed within a few hours. I had some issues then a GPU Overheat message was displayed on the LCD screen. Fortunately, the RMA was quick.
|
telehog
iCX Member
- Total Posts : 414
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/23 03:39:19
(permalink)
|
tvg67
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/05/08 09:00:54
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/27 11:30:04
(permalink)
I wanted to overclock the video card and downloaded the rtx classified from the link from the forum. The program does not start. Can someone share the program? 
|
tvg67
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/05/08 09:00:54
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/27 17:56:17
(permalink)
thanks. I found everything
|
bbevgacard
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2021/02/14 06:26:03
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/27 18:36:08
(permalink)
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/28 02:14:10
(permalink)
15360 on the Hybrid version with 520w BIOS. I'll try to push further once I got my HC kit. I guess I got plenty of headroom because my memory is unstable @ +785, guess adding more voltage to the mem might solve this. If I had to guess, I'd say the card can be pushed to 15700 relatively easy
post edited by elbramso - 2021/07/28 02:33:48
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
kraade
CLASSIFIED Member
- Total Posts : 2433
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/28 15:16:31
(permalink)
elbramso
15360 on the Hybrid version with 520w BIOS.
I'll try to push further once I got my HC kit. I guess I got plenty of headroom because my memory is unstable @ +785, guess adding more voltage to the mem might solve this.
If I had to guess, I'd say the card can be pushed to 15700 relatively easy
Your not going to get a whole lot more with the extra ram timings , My top is 15385 with +1450 mem. You do actually have a really good score, Clock is king for PR runs. My card is 15175-15200 most boosted slider runs and probably have to port so AC air in there to get over the 15500 hump, 15725 + can get you on the HOF board
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/29 11:38:32
(permalink)
Ok I made it to 15.5k now. Still using the Hybrid version and everything the 520w bios has to offer. I was able to get my mem stable @ +1250 using classified tool. here ist the run: https://www.3dmark.com/3dm/64312174
post edited by elbramso - 2021/07/29 12:37:34
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/29 22:44:29
(permalink)
Just wondering while I compare these results: https://www.3dmark.com/compare/pr/1148552/pr/1146482# My card has higher core + mem (and yes stable) and still falls behind 200pts. I do still have an old cpu (8700k), pcie gen 3 and an 60cm riser cable. I guess my card can hit the HOF already when put in the right rig^^
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
bavor
SSC Member
- Total Posts : 995
- Reward points : 0
- Joined: 2008/02/20 21:24:43
- Status: offline
- Ribbons : 6
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/30 12:32:54
(permalink)
elbramso
Just wondering while I compare these results:
https://www.3dmark.com/compare/pr/1148552/pr/1146482#
My card has higher core + mem (and yes stable) and still falls behind 200pts. I do still have an old cpu (8700k), pcie gen 3 and an 60cm riser cable.
I guess my card can hit the HOF already when put in the right rig^^
The CPU and PCIE 3.0 vs PCIE 4.0 has minimal to no effect on Port Royal scores. I'm able to get similar scores in a 6700K system to what I get in a 5950X system with the kingpin cards.
|
bavor
SSC Member
- Total Posts : 995
- Reward points : 0
- Joined: 2008/02/20 21:24:43
- Status: offline
- Ribbons : 6
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/30 12:34:58
(permalink)
kraade
elbramso
15360 on the Hybrid version with 520w BIOS.
I'll try to push further once I got my HC kit. I guess I got plenty of headroom because my memory is unstable @ +785, guess adding more voltage to the mem might solve this.
If I had to guess, I'd say the card can be pushed to 15700 relatively easy
Your not going to get a whole lot more with the extra ram timings , My top is 15385 with +1450 mem. You do actually have a really good score, Clock is king for PR runs. My card is 15175-15200 most boosted slider runs and probably have to port so AC air in there to get over the 15500 hump, 15725 + can get you on the HOF board
I've noticed huge difference in scores between a +900 MHz memory OC and a +1350 MHz memory OC on the same card with the same GPU speed. Port Royal scores are GPU VRAM speed dependent. I've seen top overclockers say the same thing.
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/30 12:46:54
(permalink)
bavor
elbramso
Just wondering while I compare these results:
https://www.3dmark.com/compare/pr/1148552/pr/1146482#
My card has higher core + mem (and yes stable) and still falls behind 200pts. I do still have an old cpu (8700k), pcie gen 3 and an 60cm riser cable.
I guess my card can hit the HOF already when put in the right rig^^
The CPU and PCIE 3.0 vs PCIE 4.0 has minimal to no effect on Port Royal scores. I'm able to get similar scores in a 6700K system to what I get in a 5950X system with the kingpin cards.
OK, it's my riser cable then
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
andi0139
New Member
- Total Posts : 89
- Reward points : 0
- Joined: 2021/06/17 02:54:39
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/31 02:35:55
(permalink)
can someone share his classified tool settings for 24/7 gaming use? Thanks
|
andi0139
New Member
- Total Posts : 89
- Reward points : 0
- Joined: 2021/06/17 02:54:39
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/07/31 08:19:45
(permalink)
so i ran into strange issue, sometimes when I start port royal with ln2 bios and both nvvdd and msvdd switches enabled my kingpin draws between 450 - 480 Watts. The other time i start it with the same settings it draws 480 -520 Watts. I have this with px1 and with afterburner aswell. Ive also seen it in games where sometimes the game draws 440 - 470 Watts and after changing the map and then go back to the same map it suddenly draws the 500-520 Watts. Settings are always the same. What could be the issue here?
|
CptT95
FTW Member
- Total Posts : 1403
- Reward points : 0
- Joined: 2016/12/31 23:06:26
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/08/08 16:07:06
(permalink)
what kind of black magic you guys using to push 16K scores? or is it just the temps that's holding me back lol
I have upgraded my fat radiator on bottom with a Hardware Labs GTR 360 push/pull since last session
|
telehog
iCX Member
- Total Posts : 414
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/08/08 18:25:01
(permalink)
CptT95
what kind of black magic you guys using to push 16K scores? or is it just the temps that's holding me back lol
I have upgraded my fat radiator on bottom with a Hardware Labs GTR 360 push/pull since last session
I ask bavor what he was doing to get his temps down and said he had 2 loops with disconects and 2 pumps with a Rad in a cooler with Ice and water for Gpu loop . I copy it and went over 16 K. plus 1000 w rebar vbios and classified tool which helped the memory OC better. 1600 w psu. The card has pulled over 870 w .When winter comes I can open garage door with out using ice and cooler and start runs at -3c any colder loop slushes up, this card should get close to 16400 in the winter I think. I don't think any scores above 16K have not used augmented cooling ! I Have 2x480 in front and 2x360 in the top, 60 mm thick, in push pull and with out a cold ambient temp Rads and fans can only do so much for benchmarks. Looking forward to Winter with ambient around at - 10 f . I won't need the 2nd chilled loop.
|
bavor
SSC Member
- Total Posts : 995
- Reward points : 0
- Joined: 2008/02/20 21:24:43
- Status: offline
- Ribbons : 6
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/08/08 22:01:25
(permalink)
telehog
...When winter comes I can open garage door with out using ice and cooler and start runs at -3c any colder loop slushes up, this card should get close to 16400 in the winter I think. I don't think any scores above 16K have not used augmented cooling ! I Have 2x480 in front and 2x360 in the top, 60 mm thick, in push pull and with out a cold ambient temp Rads and fans can only do so much for benchmarks. Looking forward to Winter with ambient around at - 10 f . I won't need the 2nd chilled loop.
Time for some antifreeze and water mix in that loop!
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/08/09 00:12:16
(permalink)
I'm hitting a wall too. This https://www.3dmark.com/pr/1162218 was my best score so far. +215 core // +1250 mem 1000w rebar bios Hydro Copper Kit installed. classified tool: NVDD: 1.2183v I tried to go for +230 core but can't get it stable even when I add 1.25v NVDD :( Overall I'm still very happy with the card but I'm super disappointed with the Hydro Copper Kit. Delta is about 25c when under 600w load... just not acceptable. I checked the die + mem contact and re-seated the card already. I'm using Kryonaut paste + thermal right extreme pads (2mm) front and full cover pad (arctic 1.5mm) on the back.
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
telehog
iCX Member
- Total Posts : 414
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/08/09 03:40:04
(permalink)
elbramso
I'm hitting a wall too.
This https://www.3dmark.com/pr/1162218 was my best score so far.
+215 core // +1250 mem
1000w rebar bios
Hydro Copper Kit installed.
classified tool:
NVDD: 1.2183v
I tried to go for +230 core but can't get it stable even when I add 1.25v NVDD :(
Overall I'm still very happy with the card but I'm super disappointed with the Hydro Copper Kit.
Delta is about 25c when under 600w load... just not acceptable. I checked the die + mem contact and re-seated the card already. I'm using Kryonaut paste + thermal right extreme pads (2mm) front and full cover pad (arctic 1.5mm) on the back.
Thats a great score at 51 c, that card will go faster. This run was at 30 c with cooler and ice water with rad, +255 core, +1540 mem , http://www.3dmark.com/pr/1134299 , Looking forward to OP Blocks and winter.
post edited by telehog - 2021/08/09 03:41:06
|
telehog
iCX Member
- Total Posts : 414
- Reward points : 0
- Joined: 2018/12/05 13:48:52
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/08/09 03:53:49
(permalink)
Time for some antifreeze and water mix in that loop! 
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2021/08/09 04:07:15
(permalink)
telehog
elbramso
I'm hitting a wall too.
This https://www.3dmark.com/pr/1162218 was my best score so far.
+215 core // +1250 mem
1000w rebar bios
Hydro Copper Kit installed.
classified tool:
NVDD: 1.2183v
I tried to go for +230 core but can't get it stable even when I add 1.25v NVDD :(
Overall I'm still very happy with the card but I'm super disappointed with the Hydro Copper Kit.
Delta is about 25c when under 600w load... just not acceptable. I checked the die + mem contact and re-seated the card already. I'm using Kryonaut paste + thermal right extreme pads (2mm) front and full cover pad (arctic 1.5mm) on the back.
Thats a great score at 51 c, that card will go faster. This run was at 30 c with cooler and ice water with rad, +255 core, +1540 mem , http://www.3dmark.com/pr/1134299 , Looking forward to OP Blocks and winter.
My personal goal is to ush the card to 16k pr score. Currently I'm pretty sure that temps are holding the card back pretty hard
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|