ehabash1
iCX Member
- Total Posts : 463
- Reward points : 0
- Joined: 2019/01/03 12:02:48
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 09:43:34
(permalink)
USALion
aprossi
Hi there! Does anyone know if FTW3 RGB will be syncable with Asus motherboards or via corsair’s ICue?
Why so many ugly cards EVGA, I really loved that clean look of my RTX2070 Gaming, I was looking for FTW30 series but that RGB “circus” really disappointed me!
JackNet RGB Sync will allow you to sync up almost all of your RGB software. It works fantastic.
Does this work with thermaltake riing plus fans? I dont see it listed but they are a big company and those fans are high sellers
|
Flonkam
iCX Member
- Total Posts : 265
- Reward points : 0
- Joined: 2018/12/02 17:58:43
- Status: offline
- Ribbons : 1
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 09:53:37
(permalink)
ehabash1
...I would need to upgrade to 1600watt.
Thats been stressing me out and making me want to skip SLI... good thing sli is dead.
As far as I know, there's a nice variety of serious reasons to skip SLI, and power isn't one of them. If power utilization were the only significant point against SLI, I would be all over it!
|
q5sys
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2016/09/02 10:55:23
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 10:25:26
(permalink)
delicieuxz
DSP1
I checked the New Egg Canada site.
Here is the page for the 30xx
https://www.newegg.ca/p/pl?N=100007708%20601357282
They have a PNY 3090 listed at $2643. Boost Clock @ 1695. Guage your pricing accordingly.
https://www.newegg.ca/pny-geforce-rtx-3090-vcg309024tfxmpb/p/N82E16814133808
Canadians, we is looking at $3K+ after taxes.
Hopefully that's not the actual price.
$1500 USD = $1978 CAD. What causes an extra $665 to appear on the price-tag? That's 1/3rd of the MSRP. I doubt there's that much extra special gear from the AIB design.
B&H Photo has the MSI GeForce RTX 3090 VENTUS priced @ $1,842, and the MSI GeForce RTX 3080 GAMING X TRIO priced @ $904. That's $343 and $205 over the FE MRSP, respectively. IDK what the Canadian conversion rate is atm, but obviously's the bump will be higher. Nvidia may have lowered prices on their FE cards, but I wouldn't be surprised if the AIB's try to keep the prices around the normal range that people were paying for the 20 generation. People have shown their willingness to pay it, why wouldn't they take the chance to cash in big... even more so considering this time around consumers are getting a big performance bump.
|
NICROD
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/01 12:19:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 10:37:31
(permalink)
|
q5sys
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2016/09/02 10:55:23
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 10:39:02
(permalink)
|
NICROD
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/01 12:19:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 10:46:10
(permalink)
|
q5sys
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2016/09/02 10:55:23
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 10:52:08
(permalink)
NICROD
q5sys
NICROD
Scalpers are already posting their loot on Ebay. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2386202.m570.l1313&_nkw=rtx+3080&_sacat=0
And at the price of $1299.00 for a 3080... they've already sold one.
Insane right? These guys are selling **** that they haven't even scalped yet?
I also find it interesting that some of them are listing the cards saying that they "pre-ordered" the card through B&H. B&H isn't doing pre-orders on these cards. I have a business account with them and called last week to ask, they said that all they can do is notify me when they officially start accepting orders. So... yea... The number of people who are going to buy them just to resell them to make a quick few hundred bucks is going to be insane. It'll be interesting to see if Ebay steps in, like they have done in the past with other products to try to limit people price gouging.
|
NICROD
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/01 12:19:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:09:33
(permalink)
q5sys
NICROD
q5sys
NICROD
Scalpers are already posting their loot on Ebay. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2386202.m570.l1313&_nkw=rtx+3080&_sacat=0
And at the price of $1299.00 for a 3080... they've already sold one.
Insane right? These guys are selling **** that they haven't even scalped yet?
I also find it interesting that some of them are listing the cards saying that they "pre-ordered" the card through B&H. B&H isn't doing pre-orders on these cards. I have a business account with them and called last week to ask, they said that all they can do is notify me when they officially start accepting orders. So... yea... The number of people who are going to buy them just to resell them to make a quick few hundred bucks is going to be insane.
It'll be interesting to see if Ebay steps in, like they have done in the past with other products to try to limit people price gouging.
Indeed. I've been monitoring several websites and it will be interesting to see how fast the stock disappears on the 17th. It reminds me of the South Park episode where they go invest their money on the stock market, "and it's gone."
|
DSP1
Superclocked Member
- Total Posts : 216
- Reward points : 0
- Joined: 2016/09/19 14:49:55
- Status: offline
- Ribbons : 1
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:20:42
(permalink)
q5sys
delicieuxz
DSP1
I checked the New Egg Canada site.
Here is the page for the 30xx
https://www.newegg.ca/p/pl?N=100007708%20601357282
They have a PNY 3090 listed at $2643. Boost Clock @ 1695. Guage your pricing accordingly.
https://www.newegg.ca/pny-geforce-rtx-3090-vcg309024tfxmpb/p/N82E16814133808
Canadians, we is looking at $3K+ after taxes.
Hopefully that's not the actual price.
$1500 USD = $1978 CAD. What causes an extra $665 to appear on the price-tag? That's 1/3rd of the MSRP. I doubt there's that much extra special gear from the AIB design.
B&H Photo has the MSI GeForce RTX 3090 VENTUS priced @ $1,842, and the MSI GeForce RTX 3080 GAMING X TRIO priced @ $904.
That's $343 and $205 over the FE MRSP, respectively. IDK what the Canadian conversion rate is atm, but obviously's the bump will be higher.
Nvidia may have lowered prices on their FE cards, but I wouldn't be surprised if the AIB's try to keep the prices around the normal range that people were paying for the 20 generation. People have shown their willingness to pay it, why wouldn't they take the chance to cash in big... even more so considering this time around consumers are getting a big performance bump.
That works out to $2427.30 for the 3090 and $1191.25 Canadian at todays exchange rate. And just now looked they have a 3090 Gaming X Trio for $1901.90 which is $2506.23 As I had said on another post somewhere, up north we are looking at over 2500 for the 3090 FTW 3 Ultra Gaming and 2700 for the Hybrid and HC. Add taxes and it's 3K+.
post edited by DSP1 - 2020/09/12 11:25:38
|
ThirteenEra
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2018/10/24 02:30:01
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:21:17
(permalink)
Report the scalpers. Price gouging is actually against Ebay's TOS. Games Workshop (warhammer miniatures) recently nuked hundreds of scalpers who tried to sell their new "big box" release. A lot of people have been successfully reporting masks, warhammer stuff, etc as well. Just send reports for all the scalpers posting cards for resale, provide detailed info about why you are reporting them, and there's a good chance they will get nuked as well.
post edited by ThirteenEra - 2020/09/12 11:23:35
|
q5sys
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2016/09/02 10:55:23
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:27:34
(permalink)
q5sys
And at the price of $1299.00 for a 3080... they've already sold one.
Correction... they've sold 4 so far.
|
NICROD
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/01 12:19:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:32:31
(permalink)
ThirteenEra
Report the scalpers.
Price gouging is actually against Ebay's TOS.
Games Workshop (warhammer miniatures) recently nuked hundreds of scalpers who tried to sell their new "big box" release. A lot of people have been successfully reporting masks, warhammer stuff, etc as well.
Just send reports for all the scalpers posting cards for resale, provide detailed info about why you are reporting them, and there's a good chance they will get nuked as well.
I just finished reporting them all. We'll see if they deactivate them, but it actually helped me vent my frustration a bit. Report Category, Listing practices Reason for Report, Inappropriate seller terms Detailed Reason, Presale
|
q5sys
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2016/09/02 10:55:23
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:39:19
(permalink)
NICROD
ThirteenEra
Report the scalpers.
I just finished reporting them all. We'll see if they deactivate them, but it actually helped me vent my frustration a bit.
It'd be one thing if they were charging $100 over retail, but almost doubling the price of the card... that's just excessive.
I get that people are trying to make a quick buck, but some of us (speaking for myself here) need these cards for work. My gaming rig still has a 750 Ti in it. I'm limited on what AI models I can do on my dev rig with a 2080. The past Titans, Quadros, and Tesla cards are too expensive for an individual developer to buy, the price of the 3090 is amazing for someone like me. If I can secure a new card I'll move the 2080 to the gaming machine. But if scalpers are practically doubling the price of 3080 cards, I fear what they're going to end up doing with the 3090 cards.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49119
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:40:40
(permalink)
Looks like 13 or 14 3080’s have already been sold under pre-order on ebay. Lol.
|
NICROD
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/01 12:19:58
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:45:59
(permalink)
Sajin
Looks like 13 or 14 3080’s have already been sold under pre-order on ebay. Lol.
Yea, it's crazy as heck that there are people out there already willing to pay more for a card without even attempting to purchase on release. As far as the scalpers go I think anyone reading this should pop over to Ebay as report those listings.
|
ThirteenEra
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2018/10/24 02:30:01
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 11:46:56
(permalink)
q5sys
NICROD
Report the scalpers.
I just finished reporting them all. We'll see if they deactivate them, but it actually helped me vent my frustration a bit.
It'd be one thing if they were charging $100 over retail, but almost doubling the price of the card... that's just excessive.
I get that people are trying to make a quick buck, but some of us (speaking for myself here) need these cards for work. My gaming rig still has a 750 Ti in it. I'm limited on what AI models I can do on my dev rig with a 2080. The past Titans, Quadros, and Tesla cards are too expensive for an individual developer to buy, the price of the 3090 is amazing for someone like me. If I can secure a new card I'll move the 2080 to the gaming machine. But if scalpers are practically doubling the price of 3080 cards, I fear what they're going to end up doing with the 3090 cards.
Put all that into the detailed description of report reason. It will really help Ebay understand the scalping if you provide the retail MSRP and compare it to their prices. Make the price gouging more obvious.
|
LiquidFreon
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2015/07/26 14:09:13
- Location: Hanging out with ceiling cat
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 12:25:17
(permalink)
Two questions: 1) I have an old X4 ULTRA 850 watt power supply and wanted to know if either the EVGA GeForce RTX 3080 FTW3 ULTRA GAMING or EVGA GeForce RTX 3080 FTW3 GAMING cards includes any 8 pin cables with them? I only seem to have two 8 pin cables on hand and do not plan on buying a new power supply. 2) The local Best Buy where I live has already listed two Gigabyte versions of the RTX 3080 along with the FE for launch day. Will EVGA be selling their versions for walk-in purchases at Best Buy as well on launch day? I don't have a CC so cash and local are my only options. Also TigerDirect and CompUSA closed all local stores eons ago, so my neighborhood Best Buy is my only option. My last two cards have been from EVGA and I would like to continue to support them as I enjoy their brand. Any information is appreciated. If you don't have an answer, I will assume it is a negative for both questions and get whats available to me at the time of launch. Thank you.
post edited by LiquidFreon - 2020/09/12 12:29:45
|
ThirteenEra
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2018/10/24 02:30:01
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 12:39:18
(permalink)
LiquidFreon
Two questions:
1) I have an old X4 ULTRA 850 watt power supply and wanted to know if either the EVGA GeForce RTX 3080 FTW3 ULTRA GAMING or EVGA GeForce RTX 3080 FTW3 GAMING cards includes any 8 pin cables with them? I only seem to have two 8 pin cables on hand and do not plan on buying a new power supply.
2) The local Best Buy where I live has already listed two Gigabyte versions of the RTX 3080 along with the FE for launch day. Will EVGA be selling their versions for walk-in purchases at Best Buy as well on launch day?
I don't have a CC so cash and local are my only options. Also TigerDirect and CompUSA closed all local stores eons ago, so my neighborhood Best Buy is my only option. My last two cards have been from EVGA and I would like to continue to support them as I enjoy their brand. Any information is appreciated. If you don't have an answer, I will assume it is a negative for both questions and get whats available to me at the time of launch. Thank you.
Ive never seen a graphics card include a power cable. You should only ever use cables from your PSU's manufacturer. If your PSU cannot support 3x 8pins for new graphics card, then either use XC3 models (they use 2x 8pins) or replace your PSU. Theres no other option.
post edited by ThirteenEra - 2020/09/12 12:50:36
|
LiquidFreon
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2015/07/26 14:09:13
- Location: Hanging out with ceiling cat
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 12:50:12
(permalink)
ThirteenEra
Ive never seen a graphics card include a power cable. You should only ever use cables from your PSU's manufacturer.
I thought that might be the case. Seeing as these cards have that third 8 pin connector, I'll have to use the two 6 to 8 pin adapter I have from my old 980 ti or the possible one included with this card if its available. I have extra 6 pin PCIE cables that came with the power supply stored away. That's if the card is even available on launch day for purchase locally. Thanks.  The PSU supports it, I just somehow seemed to have lost the third cable.
post edited by LiquidFreon - 2020/09/12 12:59:06
Attached Image(s)
|
ThirteenEra
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2018/10/24 02:30:01
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 12:51:18
(permalink)
LiquidFreon
ThirteenEra
Ive never seen a graphics card include a power cable. You should only ever use cables from your PSU's manufacturer.
I thought that might be the case. Seeing as these cards have that third 8 pin connector, I'll have to use the two 6 to 8 pin adapter I have from my old 980 ti or the possible one included with this card if its available. I have extra 6 pin PCIE cables that came with the power supply stored away. That's if the card is even available on launch day for purchase locally. Thanks.
Or use XC3 models. They have been confirmed to use 2x 8pin
|
SpriteCup1
iCX Member
- Total Posts : 360
- Reward points : 0
- Joined: 2020/09/08 18:20:46
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 14:30:21
(permalink)
Does the XC3 3080 have RGB LEDs? That's pretty important to me.
In the dark, I can feel You in my sleep.. In Your arms I feel You breathe in to me. Forever hold this heart that I will give to You, Forever I will live for You!
|
kingx11
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/07/25 20:31:47
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 14:48:09
(permalink)
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
|
ThirteenEra
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2018/10/24 02:30:01
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 14:59:31
(permalink)
kingx11
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
Extremely unlikely. It is a bad, bad idea to run PSU with cables not from that psu's manufacturer. And Evga cannot include cables for every possible PSU brand. So i am 99.99999983% sure that even KP will come with no PSU cables
|
q5sys
Superclocked Member
- Total Posts : 153
- Reward points : 0
- Joined: 2016/09/02 10:55:23
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 17:26:11
(permalink)
kingx11
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
If you've got the money for a 3090KP, you probably already own a modular power supply. Check with your PSU vendor for additional cables if you need them. Any reputable PSU vendor will sell additional cables. If they dont, question the quality of the brand, and dont risk an expensive GPU to a less than quality PSU.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 18:31:30
(permalink)
kingx11
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
What needed accessories? They are standard 8 pins.
|
Ethrem
Superclocked Member
- Total Posts : 139
- Reward points : 0
- Joined: 2014/06/09 00:17:00
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 20:28:07
(permalink)
kingx11
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
If your PSU didn’t come with extra 8 pins, it can’t support the GPU. Even my Corsair HX750 has support for 3 8 pin PCIe connectors. I went and checked the cable bag to see if it came with a third one like I thought it did and it did indeed. I plan to build a new machine around my 3080 (assuming I manage to snag one before the miners and scalpers do) but it’s good to know that I can still use it while I wait for AMD to announce their new CPUs because it is way past time to retire my trusty 780 Ti Superclocked ACX card lol.
|
kingx11
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/07/25 20:31:47
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 21:39:10
(permalink)
q5sys
kingx11
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
If you've got the money for a 3090KP, you probably already own a modular power supply. Check with your PSU vendor for additional cables if you need them.
Any reputable PSU vendor will sell additional cables. If they dont, question the quality of the brand, and dont risk an expensive GPU to a less than quality PSU.
i got the PSU cables ready for 3090 just sayin'
|
kingx11
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/07/25 20:31:47
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/12 21:43:13
(permalink)
the_Scarlet_one
kingx11
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
What needed accessories?
They are standard 8 pins.
good to know also i meant something like this (if needed) should be packaged 
|
Stoltzman1972
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2016/09/05 12:29:44
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/13 04:23:39
(permalink)
Good day people. I've been looking for some info about various partner cards, right now i think i will not be getting beefy 3x8 pin cards like FTW3 or alternatives. I think i will stick to 2x8 pin, looking at 3080 XC3 on newegg, there are 3 models - regular, ultra and black. I suspect "ultra" is like "oc" but what is "black"? Can anyone tell? Edit: looking at some german price placeholders black seems to be on the cheaper side.
post edited by Stoltzman1972 - 2020/09/13 04:39:46
|
ThirteenEra
New Member
- Total Posts : 100
- Reward points : 0
- Joined: 2018/10/24 02:30:01
- Status: offline
- Ribbons : 0
Re: Introducing the EVGA GeForce RTX 30 Series with iCX3 Technology!
2020/09/13 05:41:42
(permalink)
kingx11
the_Scarlet_one
kingx11
hopefully the guys at EVGA are packaging 3090 KP with all the needed accessories for the PSU
What needed accessories?
They are standard 8 pins.
good to know
also i meant something like this (if needed) should be packaged
That 12pin adaptor is for NVIDIA's FE only. Most aftermarket cards use standard 8pin connectors. Stoltzman1972
Good day people.
I've been looking for some info about various partner cards, right now i think i will not be getting beefy 3x8 pin cards like FTW3 or alternatives.
I think i will stick to 2x8 pin, looking at 3080 XC3 on newegg, there are 3 models - regular, ultra and black. I suspect "ultra" is like "oc" but what is "black"? Can anyone tell?
Edit: looking at some german price placeholders black seems to be on the cheaper side.
Black is budget.
|