Se7enAlpha

EVGA_JacobF

QuiescentRabbitt
Hey Jacob, I used the link for the 3070 XC3 Ultra you posted earlier, 08G-P5-3755-KR, however it appears to have modified the power limit of the card. Before I could go up to 270W at 111% PL, now I am stuck at 108% PL at 250W. Rebar is working, but the loss of OC headroom is sad. 

We are aware of this and will have an updated VBIOS shortly.

 
Excuse me, can you upload  the RTX 3070 XC3 ULTRA - DEVICE ID 10DE 2484 37553842 vbios please

We are waiting for an updated VBIOS for this card at this time.

anyone got the bios for evga 3090 xc3 hybrid rebar enable.
 
Thanks

EVGA_JacobF

The_Professor
Hi,
is it posible to get only the vBIOS for my RTX3070 XC3? In past i got so many bad results with EVGA Precision X1, broken FAN curves e.g. 
And i dont wont to install that software. So is it possible only the get the bios for 08G-P5-3755-KR?
 
Many Thanks Jacob :)

https://cdn.evga.com/bios/30Series/3755V94043A405E.zip
 

Hi,
 
I have the RTX-3070 XC3 Ultra Gaming (08G-P5-3755-KR) and the link quoted above only downloads an empty ZIP file for me.
 
Any ideas?
 
Thanks!

WNear

EVGA_JacobF

The_Professor
Hi,
is it posible to get only the vBIOS for my RTX3070 XC3? In past i got so many bad results with EVGA Precision X1, broken FAN curves e.g. 
And i dont wont to install that software. So is it possible only the get the bios for 08G-P5-3755-KR?
 
Many Thanks Jacob :)

 

Hi,
 
I have the RTX-3070 XC3 Ultra Gaming (08G-P5-3755-KR) and the link quoted above only downloads an empty ZIP file for me.
 
Any ideas?
 
Thanks!

They pulled it because it has the wrong wattage for the card. They said they will have another one shortly.

Everything worked perfectly for me but, alas, I think my Mobo is too ancient.

bettc
I followed a guide to force enable it in both 3dmark and div 2.  prior to enabling it i was getting 14800, after i was getting 15100.
 
prior to installing this bios, i was getting 14550 ish

Yo Mate, got a link to that guide there?

Any word on why the ReBAR BIOS on the OC switch now wont us turn the fan off?  Before the update I was able to get my fan to 0% when idle using the XOC bios (3080 FTW3 Ultra).
 
Now I can't get it below 30% idle.   Running the fans like this, will they last long?

TheGuz4L
Any word on why the ReBAR BIOS on the OC switch now wont us turn the fan off?  Before the update I was able to get my fan to 0% when idle using the XOC bios (3080 FTW3 Ultra).
 
Now I can't get it below 30% idle.   Running the fans like this, will they last long?

Was posted on twitch today that it would be fixed next week.

rippleeffect
Latest AsRock bios fixed the issue. Bar is now enabled. 

AsRock still hasnt published a new bios for my B560 mobo. I even sent them a support email. The last one does have the option to enable ReBar but when you do the mobo ligths up the vga and boot lights and does not post so its faulty.

ArchAngelAlien
I'm using a Gigabyte z390 Aorus Xtreme and seen there was a bios update for BAR support.
 
I downloaded the new bios and applied it. Disabled CSM, and updated my Vbios on the OC profile and got Resizeable Bar officially enalbed.
 
The issue that I am experience is afterwards, my PC is randomly locking up with a blue screen:
Critical Process Has Died. 
 
Not sure what's happened, but I basically can't use my computer for more than 30 minutes without encountering the same blue screen.
 
Any idea?

Same MB and same situation here. I had to lower a bit my RAM OC on the MB to make it stable again. 

erazr
Hi,
 
3080 FTW Ultra:
is 94.02.42.80.16 the Resizable BAR version of the (#1 normal) XOC BIOS?
 
 
It says 400W PT..
 
Regards!

 
I have the same version according to GPU-Z, but mine says 380W default and 450W maximum (which should be what I had before).

TheGuz4L
Any word on why the ReBAR BIOS on the OC switch now wont us turn the fan off?  Before the update I was able to get my fan to 0% when idle using the XOC bios (3080 FTW3 Ultra).
 
Now I can't get it below 30% idle.   Running the fans like this, will they last long?

I can still apply my fan profiles and they will work below 30%, although the 3rd fan (which has been wonky from day 1) gives me a headache before it'll work below 30%. I cut some corners by putting it to 0% idle, then jumping to 30% right away once load is applied.
It seems as if the heatsink was large enough for this. I never liked the "zero fan" mode as the card got too warm idle and got a hiccup when I applied load after leaving it alone for a longer time. With the fans spinning slowly this issue is solved (mine are set to 12% resulting in 11% operation at ~350rpm).
I updated through X1 after flashing the older 450W-bios through a commandline.

I have all boxes checked and still got message under mobo.
Did anyone get something like this?
Also I am now getting strange stutter in Warzone, it freezes on random for 1 second.
 
 

I have the EVGA Geforce RTX 3070 XC3 Ultra and I've updated everything else but the vbios, but when I got to update it, Precision X1 does nothing.  I'm running it as admin, I have RSB on and CSM off in bios.  Why is it not updating the vbios?

Hi, I have a huge problem. I run a 3090 Hybrid Ultra and a 3070 xC3 Ultra in the second slot. I updated the VBios for the 3090 but I can`t update the Vbios for the 3070. Even if I uninstall the 3090 and try to run the Bios update on the 3070 it's not working. Also, it is not possible to switch in X1 between these 2 cards to select the card where you want to run the bios update. Therefore Resizable Bar is not working. Only if I uninstall the 3070 Resizable Bar is working correctly. Any Idea how to solve this issue without having the 3070 installed? Thanks

What about the people that run xc3 bios on their ftw3 cards because of the load balancing issues, can we somehow enable ReBar with a "wrong" bios?