Thank you very much JacobF!

Updated to version 19 to fix RAID error.
 
Thanks,
Jacob

Jacob, does 19 work with E5 2660 ES or not ?

THANKS JACOB, 19 VERSION OF BIOS WILL NOW PROVEN IMMEDIATLY
 
AFTER PROVEN mSAS ARE COMPLETELY REMOVED FROM SYSTEM (AS IF NOT THERE), IT'S A JOKE?
SOMEONE HAS THE SAME PROBLEM?
 

SORRY FOR THE QUESTION, OS AND UPTIME?

THANK YOU FOR THE ANSWER,YOUR IT'S GOOD CONFIGURATION , THIS IS MY CONFIGURATION, AND THE UPGRADE THAT I DID
I KNOW THAT IS NOT A STANDARD
 
 
MY OLD SERVER CONFIG
MB: ASUS M4A79-T DELUXE
RAM: 4GB KINGSTON DDR2
OS: OPENSOLARIS V2009 64B
UPTIME: 6 MOUNTH TO CLEAN POWDER WHITH AIR COMPRESSOR
N° 3 HD RAIDZ2 500GB
 
 
 
 
 
 

MY NEW SERVER CONFIG
MB: EVGA SR-X
RAM: 1866 D.C. DDR3 CORSAIR 32GB
BIOS TESTED: 09, 16 (MAX UPTIME 16 VERSION)    
 
        O.S.                                               UPTIME
UBUNTU SERVER PRECISE 64B                   4 DAY AND MOBO DETACH mSAS HD
SABAYON SERVER X 64B                            4 DAY AND MOBO DETACH mSAS HD
FREEBSD     64B                                        4 DAY AND MOBO DETACH mSAS HD
OPENSOLARIS/SOLARIS DERIVATE            DOESN'T WORK (TOO MODERN TO HAVE)
 
AFTER HD DETACH SOMETIME NEED REBOOT FROM UPS TO SOLVE THE PROBLEM
 
HD: RAIDZ3 N° 10 CAVIARGREEN 3TB
HD: RAIDZ2 N° 3 500GB
ROOT HD KINGSTON SSD 64G
 
LINUX KERNEL'S GIVE ME SAS (ID:1D68-1D69) UNCORRECTABLE ERROR, FREEBSD DON'T VERIFIED (NOT MANY TIME).
I THINK THAT IT IS A BIOS PROBLEM AND I MAKE MY MODDED-BIOS VERSION BUT I HAVEN'T TESTED BECAUSE INVALIDATE WARRANTY... =(
 
I AM VERY HAPPY TO UPDATE FROM BIOS 16 TO BIOS 19 (V18 NOT TESTED) BUT AFTER THAT: mSAS NOTHING WORK, IN BIOS BOOT SCREEN I CAN'T SEE THE SAS RAID SCU OP.ROM AND THE mSAS HD DISAPPEARED FROM LIST
I AM SOO FRUSTATED, BUT I THINK THAT SR-X IS A GOOD PRODUCT FAST AND STABLE WHITH A LITTEL PROBLEM WITH mSAS!!!
I AM NOT ABLE TO TELL IF A PROBLEM ARE DESIGN OR BIOS
 
NO OTHER ERROR REPORTED
USB 3.0 NOT TESTED
PCI-EXPRESS NOT TESTED (ONLY STANDARD VGA NVIDIA WITH PASSIVE COOLING)
 
SORRY FOR THE ENGLISH BUT IT ISN'T MY FIRST LANGUAGE  =(
I HOPE TO HELP DEVELOPMENT FOR INCREASE mSAS STABILITY
 
 
13/06/2013
NOW AFTER 6 MOUNTHS SR-X WORKS VERY WELL, STABILITY IS 24/7 PRODUCTION SERVER, THE PROBLEM WAS A SECTOR ADDITIONAL IN ONE HARD DISK, AND THE MOBO DON'T LIKE IT VERY WELL, AFTER A LOW LEVEL FORMAT SAS WORK WERY WELL
 
VERY GOOD PRODUCT 

hi
 
bios 19 you have missed for user sas port ?
return to bios 16 , sas port working and use the hd's on this port
 
I hope bios 20 make the rigth to use sas port 
 
 

 I too can report that SAS is not working on BIOS 19.  Is there an ETA when a newer BIOS will be available that addresses this issue.  I really don't like going backward in BIOS flashes.  Going from 14 to 19 I lost my RAID 0 array on the Intel controller.  Fortunately testdisk to the rescue and I was able to recover but I would like to have my 4 other storage drives available to me via the SAS controller.

I installed 4x Titan GTX.
I had to remove the 3ware raid-controler and use the built-in.
Now problems with my 4х OCZ Vector SSD 512gb in raid0. Periodically different SSD are disconnected :(  SMART doesn't show any problems with SSD. After system switching off disks are visible again. It occurs once per day. The last drivers from Intel are used. I try return on 16 bios, Titans don't work. 

I confirm SaS mini port problem my windows not recognize my hard disk anymore:
i have 1 PCI SSD CM 88 ocz
8 x HD SATA
 
with version 0.16 of bios for let system boot from PCI SSD i was with
Launch Storage OpROM enabled
Now controlles Sas in like disable all the time
 
I notice also that before my PCI ssd drive was recognized like SaS during post
 
Now it is recognized like SATA  with bios 19.
 
PLS fix it i have GTX tinan on and can't dowgrade at 0.16 or will not work video.

It is possible to update intel sas/sata controler oprom to version 3.6 +?

Hello all!
I found out the reason of failures of my ssd in raid0. Can't use RSTe drivers version above 3.1
I think RSTe drivers 3.5 and above try to use TRIM for the RAID0 arrays and it causes errors. The SR-X motherboard has the old sata\sas oprom version - 3.0.0.1ххх. Please, EVGA, update oprom to version 3.5 or above!

Hi;
Please help,
My motherboard EVGA SR-X. I put all the components on the motherboard AMI POST Code 19 number, but I get the error. No image on the screen does not come, what can I do please help me I can not figure out this error.

Ram: Kingston ValueRAM memory - 32 GB: 4 x 8 GB - DIMM 240-pin -DDR3
Powersupply: EVGA NEX 1500W SuperNova
CPU: Intel Core i7-3930, 6x 3.20GHz, boxed (BX80619I73930K)
Corsair H100
Asus Geforce GTX 680

I do not know the bios version, I put all the new parts, I pressed the power button to display the image did not come. How can I find the BIOS version. Please help me. I'm in hell

Also you can try bios selector switch on the motherboard. Look for it in the right bottom corner of motherboard. Put it on the left position for use an earlier version of bios.