EVGA

Hot!EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.)

Page: << < ..67 Showing page 7 of 7
Author
makotochan
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2014/12/01 21:39:15
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/16 20:45:49 (permalink)
Anyone know if the HC block for the kingpin will be sold anytime soon? Thank you in advance.
Carmen813
Superclocked Member
  • Total Posts : 175
  • Reward points : 0
  • Joined: 2012/03/26 14:32:10
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/17 07:16:18 (permalink)
NotoriouS^
Good to see more people getting higher into the 15's in PR. My chip in my KPE sucks and just barley cracked the 15's in PR. Anything over 2160MHz results in PR crash. After 2 weeks of fighting with it and the CT i submitted to defeat lol.


I can't crack it, 2130 is as far as I got. 1250 on memory, m as ybe a little room there.

Tomnician
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2018/05/28 13:48:39
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/19 09:17:44 (permalink)
I don't know if this is good or bad but thought I'd share my 3Dmark: (Graphics Score 20478)
 
Edit: Nevermind this was in Time Spy, I just realized everyone else was posting port royal. 
 
post edited by Tomnician - 2021/03/19 09:20:28
Dabadger84
CLASSIFIED Member
  • Total Posts : 3182
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: online
  • Ribbons : 9
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/19 15:29:50 (permalink)
Tomnician
I don't know if this is good or bad but thought I'd share my 3Dmark: (Graphics Score 20478)
 
Edit: Nevermind this was in Time Spy, I just realized everyone else was posting port royal. 
 




What's the rest of your setup?  Is that Time Spy Extreme or regular Time Spy?
 
For me this is what I've seen in my limited TS/TSE testing:
 
TS: https://www.3dmark.com/spy/18515476 19428 (cuz my CPU) score with 21820 Graphics Score
TSE: https://www.3dmark.com/spy/17783395 This run is old, but still relevant, 9624 with a graphics score of 11128

Save up to 10% on eVGA.com , use my Associates Code: 47AQQ6KPU2IZNXY
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
System Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x16GB G.Skill Trident Z Royal @ 3600 CL14
eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

alpharius194
Superclocked Member
  • Total Posts : 123
  • Reward points : 0
  • Joined: 2020/11/09 14:53:38
  • Status: online
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/19 17:09:21 (permalink)
Dabadger84
Tomnician
I don't know if this is good or bad but thought I'd share my 3Dmark: (Graphics Score 20478)
 
Edit: Nevermind this was in Time Spy, I just realized everyone else was posting port royal. 
 




What's the rest of your setup?  Is that Time Spy Extreme or regular Time Spy?
 
For me this is what I've seen in my limited TS/TSE testing:
 
TS: https://www.3dmark.com/spy/18515476 19428 (cuz my CPU) score with 21820 Graphics Score
TSE: https://www.3dmark.com/spy/17783395 This run is old, but still relevant, 9624 with a graphics score of 11128


So on the 5900x, my cpu score is definitely stronger but my gpu score seems to have lost a little of its edge in port royal. this was somewhere around +120 core (I cant get my port royal settings stable in time spy) 21269 overall with 22787 gpu and 15443 cpu
NVIDIA GeForce RTX 3090 video card benchmark result - AMD Ryzen 9 5900X,ASUSTeK COMPUTER INC. ROG CROSSHAIR VIII DARK HERO (3dmark.com)
on the 9900ks I only managed 19606 total with 22197 on the gpu score and 11802 on the cpu. I will admit the 22197 may be my gaming overclock which is auto voltage and only +90 core.
NVIDIA GeForce RTX 3090 video card benchmark result - Intel Core i9-9900KS Processor,ASUSTeK COMPUTER INC. ROG MAXIMUS XI HERO (WI-FI) (3dmark.com)
degenerate
iCX Member
  • Total Posts : 478
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/20 05:02:07 (permalink)
gsorin
My crappy noisy KP, LN2 bios, really quick & dirty OC +190 core / +1000 mem, set in classified NVVDD 1.168V, *MSVDDV 1.1V, Freq 800kHz and LLC6

no fancy bios installed, gonna RMA to EVGA or return this crap to the store, the pump noise is ruining the gaming sessions, it sounds like a fridge + coil whine bonus :(


What? I'd kill to have your card. Puts mine to shame, I can't even break past 15k with a bleeding edge 5900x rig.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 4000 C17 @ 3800 C14|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
gsorin
New Member
  • Total Posts : 52
  • Reward points : 0
  • Joined: 2015/07/22 10:48:14
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/23 04:53:11 (permalink)
yeah, it was not a bad chip at all in the end...
but the noise was... awful - "fridge" pump & coil whine :))
these are my "stock" results, regular bios, no precision etc
https://www.3dmark.com/fs/25015073
https://www.3dmark.com/spy/18590904
https://www.3dmark.com/pr/923457
and this one below was one of the few ones on LN2 bios with full speed fans and some quick tweakings mentioned in my previous post, was trying one night to get in the HOF, was quite achievable at that time, needed just few hundreds points more then to be in the first 100, but then got bored :)
https://www.3dmark.com/pr/923459
card is already for weeks in EVGA's shop for RMA, for repair or replacement, don't know yet
Dabadger84
CLASSIFIED Member
  • Total Posts : 3182
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: online
  • Ribbons : 9
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/23 14:57:41 (permalink)
degenerate
gsorin
My crappy noisy KP, LN2 bios, really quick & dirty OC +190 core / +1000 mem, set in classified NVVDD 1.168V, *MSVDDV 1.1V, Freq 800kHz and LLC6

no fancy bios installed, gonna RMA to EVGA or return this crap to the store, the pump noise is ruining the gaming sessions, it sounds like a fridge + coil whine bonus :(


What? I'd kill to have your card. Puts mine to shame, I can't even break past 15k with a bleeding edge 5900x rig.




Looking at his voltages, that's why the clocks can get that high. 1.168V on what is basically VCore is pretty steep considering it tops out in the 1.1V range stock and will typically be at around 1.068-1.075v on the actual VCore, so that's basically 10% more voltage give or take, and still somehow only capping out at 2205MHz core for the majority of the test.
 
Not really that special in the end, the score is nice though.  If I could get mine to score how it used to, that'd be great, I haven't run the test in a while because I got tired of getting 14.6-14.9k on settings that should definitely be hitting 15.3-15.4k, for reasons I still cannot determine other than it being Windows randomly feeling like running good that one time I got 15.4k runs in.

Save up to 10% on eVGA.com , use my Associates Code: 47AQQ6KPU2IZNXY
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
System Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x16GB G.Skill Trident Z Royal @ 3600 CL14
eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

degenerate
iCX Member
  • Total Posts : 478
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/24 02:38:14 (permalink)
Dabadger84
degenerate
gsorin
My crappy noisy KP, LN2 bios, really quick & dirty OC +190 core / +1000 mem, set in classified NVVDD 1.168V, *MSVDDV 1.1V, Freq 800kHz and LLC6

no fancy bios installed, gonna RMA to EVGA or return this crap to the store, the pump noise is ruining the gaming sessions, it sounds like a fridge + coil whine bonus :(


What? I'd kill to have your card. Puts mine to shame, I can't even break past 15k with a bleeding edge 5900x rig.




Looking at his voltages, that's why the clocks can get that high. 1.168V on what is basically VCore is pretty steep considering it tops out in the 1.1V range stock and will typically be at around 1.068-1.075v on the actual VCore, so that's basically 10% more voltage give or take, and still somehow only capping out at 2205MHz core for the majority of the test.
 
Not really that special in the end, the score is nice though.  If I could get mine to score how it used to, that'd be great, I haven't run the test in a while because I got tired of getting 14.6-14.9k on settings that should definitely be hitting 15.3-15.4k, for reasons I still cannot determine other than it being Windows randomly feeling like running good that one time I got 15.4k runs in.


Relative to my card which doesn't seem to want to boost past 2145 it's special.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 4000 C17 @ 3800 C14|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
electrosoft
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2009/06/11 12:21:12
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/24 12:35:41 (permalink)
Dabadger84
 
Looking at his voltages, that's why the clocks can get that high. 1.168V on what is basically VCore is pretty steep considering it tops out in the 1.1V range stock and will typically be at around 1.068-1.075v on the actual VCore, so that's basically 10% more voltage give or take, and still somehow only capping out at 2205MHz core for the majority of the test.
 
Not really that special in the end, the score is nice though.  If I could get mine to score how it used to, that'd be great, I haven't run the test in a while because I got tired of getting 14.6-14.9k on settings that should definitely be hitting 15.3-15.4k, for reasons I still cannot determine other than it being Windows randomly feeling like running good that one time I got 15.4k runs in.




 
What version of Windows are you running?
 
Also this:
 
Dabadger84
Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

 
Sheesh, how is gaming on that monster?
 
lifeisshort117
New Member
  • Total Posts : 73
  • Reward points : 0
  • Joined: 2008/10/31 04:46:54
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/24 14:53:46 (permalink)
rome1120
https://www.3dmark.com/pr/919835
Best I got with one card with the 5950X but it took a lot of time to get the other score adjusting I still think I can get better when I hav more time



Wild. Is this really how sensitive PR is to clock speeds?
I compared my best run with yours since in this test, screenshot attached; we have nearly identical hardware.
 
What a huge joke of a gap in score lol 807 points over 3.74 FPS difference overall.
 

Attached Image(s)

Dabadger84
CLASSIFIED Member
  • Total Posts : 3182
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: online
  • Ribbons : 9
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/24 20:33:39 (permalink)
electrosoft
Dabadger84
 
Looking at his voltages, that's why the clocks can get that high. 1.168V on what is basically VCore is pretty steep considering it tops out in the 1.1V range stock and will typically be at around 1.068-1.075v on the actual VCore, so that's basically 10% more voltage give or take, and still somehow only capping out at 2205MHz core for the majority of the test.
 
Not really that special in the end, the score is nice though.  If I could get mine to score how it used to, that'd be great, I haven't run the test in a while because I got tired of getting 14.6-14.9k on settings that should definitely be hitting 15.3-15.4k, for reasons I still cannot determine other than it being Windows randomly feeling like running good that one time I got 15.4k runs in.




 
What version of Windows are you running?
 
Also this:
 
Dabadger84
Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

 
Sheesh, how is gaming on that monster?
 




Windows 10 - this also happened with a completely fresh install of Windows on a completely separate drive with no other drives plugged in from this install, so it's either something in the newer version of Windows gimping me, or the 15.4k thing was a fluke... since others with my setup or similar have also hit 15.4k+, I assume it's my Windows being a d-bag and not anything else.
 
In a word: Immersive.  In several words: Freaking amazingly immersive.  Playing Cyberpunk on it was amazing even though I was getting in to the low 30s FPS range at times because I had settings absolutely cranked with RT on Psycho.  I'm still debating which games I'm going to play next, I think I'm going to play something a little less "long" in between now & when I dive in to the next big-game replay/playthrough, might redo the FIFA campaigns because I liked those (from 17-19, not sure what they did for 20-21) and they're not too too long, then I'm thinking something like Outer Worlds, Death Stranding or maybe something else shorter like Control.
 
If it wasn't so darn expensive, and it actually still had support, I'd love to run SLi, but knowing how few games actually support it, I don't plan on sinking any more money in to GPUs.  A 5900x/X570 build path with some fancy new PCIe Gen4 M.2s is the next thing on the list.
 
lifeisshort117
rome1120
https://www.3dmark.com/pr/919835
Best I got with one card with the 5950X but it took a lot of time to get the other score adjusting I still think I can get better when I hav more time



Wild. Is this really how sensitive PR is to clock speeds?
I compared my best run with yours since in this test, screenshot attached; we have nearly identical hardware.
 
What a huge joke of a gap in score lol 807 points over 3.74 FPS difference overall.
 




One thing worthy of note, he has SMT disabled in his run.  That might be a thing that helps Port Royal, I might try disabling HT myself just to see if it has any effect.

Save up to 10% on eVGA.com , use my Associates Code: 47AQQ6KPU2IZNXY
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
System Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x16GB G.Skill Trident Z Royal @ 3600 CL14
eVGA RTX 3090 K|NGP|N w/HydroCopper Block - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

gsorin
New Member
  • Total Posts : 52
  • Reward points : 0
  • Joined: 2015/07/22 10:48:14
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/24 22:14:20 (permalink)
mine is 20H2
driver 460.79 (I think is the "Cyberpunk" one from early December), clean (*.inf tuned to install just the driver and PhysX only, no GirlFriend Experience and other bloatware), I tried many, but this one gives 1-300 points more depending on the run, and it is still the best in RDR2 and CP2077
LinS123
New Member
  • Total Posts : 59
  • Reward points : 0
  • Joined: 2018/11/11 12:33:28
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/28 15:34:53 (permalink)
I had the chance to SLi two Kingpins for a brief moment in a monstrous Frankenstein build. Had to find a MSI X570 MEG Godlike to use since that's the only board that has 4 slot spacing. But for the brief time I had it. I made it to #28 in Port Royal. I am content now, at least until next gen releases lol.

https://www.3dmark.com/pr/965707 - 28576 Port Royal

CPU was stock stock except for +100core and +500mem at 120% power limit.
 
A picture of my abomination: https://imgur.com/7ViqWSA

5950X / 32GB 3600CL16 / 3090 Kingpin / Corsair AX1600i
TsBForsaken
Superclocked Member
  • Total Posts : 135
  • Reward points : 0
  • Joined: 2020/04/26 21:35:36
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/03/30 11:39:15 (permalink)
I can get close to a 21k in timespy but can not crack 15k yet in PR. lmao annoyed but I will figure it out. I just bought a 10900KF and z490 Dark Kingpin board so once I get it all going and getting the new board down it shouldn't be too hard.
Timespy : https://www.3dmark.com/spy/19375032
Port Royal : https://www.3dmark.com/pr/956122
rtgoad
New Member
  • Total Posts : 16
  • Reward points : 0
  • Joined: 2019/05/01 22:50:14
  • Status: online
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/04/04 13:09:29 (permalink)
Could not be more pleased with my results. Thought my 2080 KP was pretty good, but feel like I got really lucky this time around.
 
PR 14452 (No OC) - 3dmark.com/pr/979235
PR 15656 (30 minutes of tweaking settings) - 3dmark.com/pr/977434
 
edit: Unfortunately I have too few posts to include links. Just need to include www. prior to the 3dmark for them to work. Apologies. 
post edited by rtgoad - 2021/04/04 14:46:29
JealousBlue
New Member
  • Total Posts : 32
  • Reward points : 0
  • Joined: 2016/07/06 08:11:39
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/04/05 08:38:11 (permalink)
Haven't spent too much time OCing the thing yet, Best run I got on OC bios (not LN2) with just X1 sliders no voltage changes. One thing I noticed is the "Textured filtering Quality" in Nvidia control panel being set to "High Performance" has a major impact on scores, I was not breaking 15 until I switched this, went up over 300 points on that setting alone.
 
think I was +160 clock and +1000k mem (could have been higher mem clock)
9900k(I have probably the worst 9900k on the planet)
Score: 15 194 

 
 
Memory24,576 MB
Clock frequency2,160 MHz (1,395 MHz)
Average clock frequency2,136 MHz
Memory clock frequency1,369 MHz (1,219 MHz)
Average memory clock frequency1,369 MHz
Average temperature50 °C
Carmen813
Superclocked Member
  • Total Posts : 175
  • Reward points : 0
  • Joined: 2012/03/26 14:32:10
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/04/05 08:41:59 (permalink)
Can anyone give me a sense of their temperatures above ambient? My case ambient is around 35C (probe taking air temp entering kingpin radiator) Under a 475w or so load temps hit around 63. So my delta is 28c.

lucidworld
New Member
  • Total Posts : 79
  • Reward points : 0
  • Joined: 2014/03/07 23:32:26
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Owners thread (bench marks, questions, etc.) 2021/04/06 12:36:50 (permalink)
Here's my best Port Royal score so far, 15,495 :
 
https://www.3dmark.com/pr/981728
 
LN2 Bios
+135 core
+1385 memory
+100mV
max power


Page: << < ..67 Showing page 7 of 7
Jump to:
  • Back to Mobile