NICKODEMUS81
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2021/04/26 23:22:14
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 01:44:50
(permalink)
TheNaitsyrk
NICKODEMUS81
Hi Guys!
I'm new of the forum and is the first time that i bought a EVGA GPU, and it's the first time to that i buy a so powerfull one, i speak about of the RTX 3090 FTW3 ultra obviusly. ;) i have a questio,if I'm not wrong this vga have a switch for 2 kind of bios "gaming" and "normal", is correct? how it work?
Thank u at all for the help.
When I owned my one, I haven't found a difference. Power usage same, cooling same. Sometimes it wasn't switching so you had to restart twice etc. Any BIOS will do to be fair. Adjust fan curve appropriately.
Thank u for the answer, but my question is more basically, i mean, how it works? i immagine i have to turn off the PC obviusly, PSU switch power off and then i switch on the chosed bios, right? only this? the VGA is maded with 2 bios of factory right? i don't have to update or flash notthing, right?
post edited by NICKODEMUS81 - 2021/04/27 01:47:43
|
TheNaitsyrk
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2017/04/24 09:34:50
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 02:08:54
(permalink)
Turn PC off, switch it and then turn it back on.
2nd BIOS doesn't do anything due to inherit problems with FTW3 cards. Power usage is same, everything is same except fan curve which you can just change yourself in Afterburner.
|
NICKODEMUS81
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2021/04/26 23:22:14
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 02:23:43
(permalink)
TheNaitsyrk
Turn PC off, switch it and then turn it back on.
2nd BIOS doesn't do anything due to inherit problems with FTW3 cards. Power usage is same, everything is same except fan curve which you can just change yourself in Afterburner.
Thank u so much guys! :D
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 05:17:08
(permalink)
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w https://www.3dmark.com/3dm/61088465? +185 +1200 very happy !
post edited by ramsito82 - 2021/04/27 05:23:52
|
asmodyus
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2008/03/25 09:08:31
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 05:35:44
(permalink)
Have a EVGA product to register? Please use my Affiliate Code when registering your product. Click the banner to register with my Affiliate Code. Thank You Very Much!
|
asmodyus
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2008/03/25 09:08:31
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 05:36:16
(permalink)
asmodyus
I upgraded my RTX 3090 Utlra new OC bios and it's now showing 94.02.42.80.27 but I have a triangle ! and says resizable BAR disabled With there a lot post on this thread and it's hard to find the solution any ideas on what to do?
So any info on this can some body direct me to where to get the rebar activated? So I also check my setting in nvdia and it also says no.
post edited by asmodyus - 2021/04/27 05:37:55
Have a EVGA product to register? Please use my Affiliate Code when registering your product. Click the banner to register with my Affiliate Code. Thank You Very Much!
|
ckelas
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 2016/08/05 13:34:32
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 06:34:10
(permalink)
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
Congrats bro!!! Which country??
post edited by ckelas - 2021/04/27 06:36:31
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 06:38:51
(permalink)
ckelas
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
Congrats bro!!! Which country??
Spain
|
ckelas
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 2016/08/05 13:34:32
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 06:40:06
(permalink)
ramsito82
ckelas
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
Congrats bro!!! Which country??
Spain
That’s awesome, can I please also ask how long you waited for your replacement card?
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 06:41:20
(permalink)
ckelas
ramsito82
ckelas
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
Congrats bro!!! Which country??
Spain
That’s awesome, can I please also ask how long you waited for your replacement card?
20 days
|
ckelas
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 2016/08/05 13:34:32
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 06:43:10
(permalink)
ramsito82
ckelas
ramsito82
ckelas
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
Congrats bro!!! Which country??
Spain
That’s awesome, can I please also ask how long you waited for your replacement card?
20 days
Oh man, that’s promising. Wishing you the best and enjoy bro!!!
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 06:44:53
(permalink)
ckelas
ramsito82
ckelas
ramsito82
ckelas
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
Congrats bro!!! Which country??
Spain
That’s awesome, can I please also ask how long you waited for your replacement card?
20 days
Oh man, that’s promising.
Wishing you the best and enjoy bro!!!
Thank you very much! It is the third ftw3 ultra, and it seems that I finally have one without power problems and good silicon.
|
DarthSawyers
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2018/07/27 07:40:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2021/04/27 09:33:48
(permalink)
This probably has been asked before but I just got my card of Saturday. I got the Resizable bar to work but it keeps telling me that I can't update to the 500W bios. It says there is no display adapter that can update it. Is there anyway I can see if it already has it on the card.
My Bios Version is
94.02.42.C0.02
3090 FTW3 Ultra
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 12:54:59
(permalink)
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
15k on air! Wow that's an insanely good card, gratz!
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 14:10:03
(permalink)
elbramso
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
15k on air! Wow that's an insanely good card, gratz!
thanks, here with the bios kingpin +130 +1500 15141p https://www.3dmark.com/3dm/61101091
post edited by ramsito82 - 2021/04/27 14:19:07
Attached Image(s)
|
EthanBurke
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2021/02/09 17:18:55
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 14:34:44
(permalink)
I have two problems. I update my bios with evga precision x 1. I have a 3090 ultra hybird. My bios version is 94.02.42.c0.11.
It says, after updating bios:
-Csm support must be disabled before updating BIOS-
I have a second problem. This comes by default at values 44 and 40. The fan won't let me go below 30 percent speed.
|
lobstar
Superclocked Member
- Total Posts : 208
- Reward points : 0
- Joined: 2007/03/05 13:08:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 20:31:59
(permalink)
TheNaitsyrk
Sold it, got Suprim X and scores went up from 4050 to 4450. KP 520W bios works perfectly (ON AIR!) and PCI-E power doesn't go past 50W, clock speed 2160Mhz and no water block yet.
What settings in Heaven? I just got a score of 7500 on my revised card with KPE520w ...
|
rayven96
Superclocked Member
- Total Posts : 112
- Reward points : 0
- Joined: 2021/04/15 10:08:19
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 21:26:36
(permalink)
lobstar
TheNaitsyrk
Sold it, got Suprim X and scores went up from 4050 to 4450. KP 520W bios works perfectly (ON AIR!) and PCI-E power doesn't go past 50W, clock speed 2160Mhz and no water block yet.
What settings in Heaven? I just got a score of 7500 on my revised card with KPE520w ...
this is a very good result
|
lobstar
Superclocked Member
- Total Posts : 208
- Reward points : 0
- Joined: 2007/03/05 13:08:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 21:34:01
(permalink)
rayven96
lobstar
TheNaitsyrk
Sold it, got Suprim X and scores went up from 4050 to 4450. KP 520W bios works perfectly (ON AIR!) and PCI-E power doesn't go past 50W, clock speed 2160Mhz and no water block yet.
What settings in Heaven? I just got a score of 7500 on my revised card with KPE520w ...
this is a very good result
I ran it again with all settings maxed at 3440x1440 and got less than 4000 ... so it's very settings dependent.
|
elbramso
Superclocked Member
- Total Posts : 192
- Reward points : 0
- Joined: 2021/01/31 22:31:39
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 21:36:01
(permalink)
ramsito82
elbramso
ramsito82
card received from rma's special program, serial 2112, I leave a royal port +185 +1000. pci max 66w, maximum consumption 506w
https://www.3dmark.com/3dm/61088465? +185 +1200
very happy !
15k on air! Wow that's an insanely good card, gratz!
thanks, here with the bios kingpin +130 +1500 15141p
https://www.3dmark.com/3dm/61101091
This card deserves a waterblock ;-)
RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
|
lobstar
Superclocked Member
- Total Posts : 208
- Reward points : 0
- Joined: 2007/03/05 13:08:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/27 22:53:27
(permalink)
|
SpeCla69
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/04/28 04:03:06
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2021/04/28 04:22:52
(permalink)
Another 3090 FTW3 Ultra user here. Flashed XOC bios and have no change to power limit while running heaven benchmark and superposition in 4k. Max power draw I've seen is it touched 420W once or twice, but hovers around 400W... max shown in photo is 108% when sliders are all maxed out to 119%. Pretty disappointed as I've gone through the effort to water-cool it, temps never go above 52C. Hopefully a bios fix soon, dreading if I have to RMA it but wouldn't be surprised as at least most of the users here are getting 420-450W... I'm at a measly 400W average lol.
Attached Image(s)
|
arcanexvi
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/10/15 12:48:08
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2021/04/28 04:54:39
(permalink)
SpeCla69
Another 3090 FTW3 Ultra user here. Flashed XOC bios and have no change to power limit while running heaven benchmark and superposition in 4k. Max power draw I've seen is it touched 420W once or twice, but hovers around 400W... max shown in photo is 108% when sliders are all maxed out to 119%.
Pretty disappointed as I've gone through the effort to water-cool it, temps never go above 52C.
Hopefully a bios fix soon, dreading if I have to RMA it but wouldn't be surprised as at least most of the users here are getting 420-450W... I'm at a measly 400W average lol.
Yours looks to be near-identical to mine (got it from EVGA direct back in December). Your PCIe power @ 80+w basically forces the card to power throttle even though it could easily just pull more power from the 8 pins, it won't. In GPUZ you're going to just see a giant green band indicating power limited even though you're 400-420w with the 500w BIOS. My RMA is supposed to ship today. Hopefully that resolves it for me but if you're not happy with your results and/or are concerned about damaging your MB from higher than standard draw, you're going to have to RMA it. Max draw off that slot should be 75w and while 80w probably won't hurt anything, that's what's likely power limiting the cards. Mine was pulling about 82w under load. My SN for reference was starting 2012.
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2021/04/28 06:31:28
(permalink)
SpeCla69
Another 3090 FTW3 Ultra user here. Flashed XOC bios and have no change to power limit while running heaven benchmark and superposition in 4k. Max power draw I've seen is it touched 420W once or twice, but hovers around 400W... max shown in photo is 108% when sliders are all maxed out to 119%.
Pretty disappointed as I've gone through the effort to water-cool it, temps never go above 52C.
Hopefully a bios fix soon, dreading if I have to RMA it but wouldn't be surprised as at least most of the users here are getting 420-450W... I'm at a measly 400W average lol.
Identical behavior to mine I'm just waiting for the hybrid to join the 3090OC RMA so I can swap it out.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
Lord Winchester
Superclocked Member
- Total Posts : 222
- Reward points : 0
- Joined: 2017/12/25 16:49:25
- Status: offline
- Ribbons : 3
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2021/04/28 06:44:51
(permalink)
SpeCla69
Another 3090 FTW3 Ultra user here. Flashed XOC bios and have no change to power limit while running heaven benchmark and superposition in 4k. Max power draw I've seen is it touched 420W once or twice, but hovers around 400W... max shown in photo is 108% when sliders are all maxed out to 119%.
Pretty disappointed as I've gone through the effort to water-cool it, temps never go above 52C.
Hopefully a bios fix soon, dreading if I have to RMA it but wouldn't be surprised as at least most of the users here are getting 420-450W... I'm at a measly 400W average lol.
There is no Bios, that can fix a bad Pcb design. You need to apply for special RMA by writing to 3090oc@evga.com
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2021/04/28 07:13:33
(permalink)
Specla69, what are the first 4 digits of your serial number? As the user above has mentioned - it's a half a..ed design, unfixable with software. Depending on how much you've paid for yours, you might be better off selling it and getting a different brand. The RMA in EU takes about 3 weeks but there were reports of RMA cards being as bad as the card they sent in. Since no one from EVGA bothers on explaining the core of the issue, I'd sell it asap and not risk another lemon.
post edited by Bepzinky - 2021/04/28 07:17:41
|
broski
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2020/12/03 04:47:46
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/28 07:29:34
(permalink)
|
warbucks81
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2013/06/05 18:38:24
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/28 07:41:55
(permalink)
My replacement card through the swap program shipped yesterday. Serial number starts with 2114. Looking forward to getting it for the weekend and checking it out.
|
Swemmel
Superclocked Member
- Total Posts : 107
- Reward points : 0
- Joined: 2021/04/28 00:25:14
- Status: offline
- Ribbons : 0
Flagged as Spam (1)
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/28 08:06:26
(permalink)
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/04/28 08:26:32
(permalink)
|