I have been thinking of doing a push/pull set up just for kicks but i am unsure of the best way to go about this with my current rad.

Rad- XSPC EX360

Fans - Corsair SP120 High Performance High Static Pressure

I currently have both rads set up as and exhaust so i have a few options -

Both fan sets as exhaust ?
1 set pulls air in/the other set blows air out ?
I don't want both sets as an intake because that would create too much dust

I have a 360 rad mounted externally as well so i don't see push/pull on that rad benefiting me too much since its expose to much cooler air.

And if the difference is potential only a few C i wont even bother.

Picked up some stuff to hopefully clean the Plasticizer out of my Swiftech Maelstrom res -

wildwill

Picked up some stuff to hopefully clean the Plasticizer out of my Swiftech Maelstrom res -

 
Ok, hot water and vinegar I have heard of, but LIME JUICE and BAKING SODA?!? I don't get it.

nookie420

whats up with people and the 90° elbow flow killers when they aren't required?

  Can't wait to get my 800D and XSPC kit soon.  LOVE 800D's.  top 5 Best production case for sure.  CAn't beat price/features.

Fractal makes nice cases but nothing quite big enough.  I thought about doing a mini-itx gaming rig , but thats another story.

Keep us posted!

 
Where ever i put 90 degree rotary fittings they where needed and everything has performed well so the flow seems fine.
 
I love this case so i agree its 1 of the best designs over the past few years. I was going to get a Caselabs MH10 recently but i would rather push this case to it's max first.
 

Ironkidz

wildwill

Picked up some stuff to hopefully clean the Plasticizer out of my Swiftech Maelstrom res -

Ok, hot water and vinegar I have heard of, but LIME JUICE and BAKING SODA?!? I don't get it.

 
A fellow member recommend this combination on OCN.com so i gave it a shot.

That is one awesome looking build! I dig your new reservoir.

blood4guts

That is one awesome looking build! I dig your new reservoir.

Thanks bro i love it 2 as it is packed with nice features.

bust out that drillbit and use mounting brackets and some nice looking screws :)
 
you wouldn't want to have it being held only by tape/velcro with the vibration the pump produces anyways.
 
maybe something soft like rubber or mounting tape in between the bracket and mounting service to insulate the vibrations though.

eternitykh

bust out that drillbit and use mounting brackets and some nice looking screws :)

you wouldn't want to have it being held only by tape/velcro with the vibration the pump produces anyways.

maybe something soft like rubber or mounting tape in between the bracket and mounting service to insulate the vibrations though.

 
I am hoping that bracket i posted works out well since i don't want to mess with the case 2 much. I like to keep things as oem as possible but still add something unique to the design.
 
I will report back when the bracket arrives. 

I just ordered my 800D and hardware :-D  woo, we can be 800d watercooled bros now

Here is the final break down of what i have planned so i can at least say i am done for at least 6 months lol -

I will be returning the 120mm UV Blue rad i just received and will be replacing it with a XSPC EX120mm rad -


.
(UN Designs 3G Pump Bracket (for Laing D4/D5 pump) V2 - So i can mount the pump sideways.



(UN)Designs Pump Z3-Bracket (for Laing D4/D5/DDC Pumps) & 140mm Fans - Deep Blue



Bitspower Flow Indicator (BP-FI-CLBKMBK) - Clear/Black/Matte Black



Bitspower UV Mesh Radguard 360 (3 x 120mm) UV Green - I will mount this on the internal 360 rad to add some pop and also help keep the dust levels down.



Bitspower UV Mesh Radguard 120 (1 x 120mm) - UV Green



Mod/Smart Dual LED - Pre-wired with 4-Pin Connector - 3mm - Blue - I will have 3 of these sleeved in UV green for the XSPC Raystorm block replacing the black sleeving i have there now.



Mayhems X1 UV Green Concentrate - 250ml

Danger Den Premium Tube Cutter



Bitspower Single Luxury Tube Clamp LTC7 For Tube OD 3/4in. - Black X4



BitFenix 3-pin to 3 x 3-pin Fan Adapter Cable - 60cm - Black Sleeve X2



24 pin power MOBO,8 pin power CPU,6 pin PCIe X4 - I am having them all sleeved in UV green and the connecters themselves are also being replaced with UV green counterparts.

The entire point of everything i have done with this build is to have a powerful and visualizing appealing PC and i am confident when i am done i would have accomplished this.

Updated first page with the total cost of anything that has been related to water cooling this case thus far and i am shocked with the amount of money i have spent already.

Fantastic build log

I love the flat black finishes on the fittings. You guys spend money on your PC rigs like I do on my car...I need to make more money, so I can do both.

I have ditched the idea of mounting the pump sideways to the hot swap drive bay and will be going with this combination -

(UN)Designs Pump Z3-Bracket (for Laing D4/D5/DDC Pumps) & 140mm Fans -

I will mount this to the mid panel 140mm fan location.



(UN)Designs 3G Pump Bracket (for Laing D4/D5 pump) V2 -

I will then mount this to the top of the Z3 bracket and by doing this i leave some room for the 140mm fan below to move air. I wanted the pump to be mounted in mid air anyway so this after much researching is the best route to do this.

I am going to change my CPU water block since the comp is down the past few weeks while i upgrade a few things -

I want a more low profile look and would like to show off the UV Green fluid i have going in a little bit better.

EK Supremacy Universal CPU Liquid Cooling Block - Plexi