owcraftsman

bcavnaugh
And what real good will that do in the end?
I would think that after 655 Post in a Single Thread and even a few other Threads this must not really be an issue that needs attention.
Let's see where the Support Ticket That Opolis Submitted Goes before some just keep Bumping this Thread.

If it's not an issue then why would jaccob say "we are working on it" in response to "when will it be fixed"
If it's not an issue then why not respect the folks here who are concerned about it and confront the perceived issue directly.
If it's not an issue then why would support reply to my support ticket with "we are working on it?
If it's not an issue then why do we here it's a driver issue.
If my 1080Ti FE out performs my FTW3 overclocking and performance ITS AN ISSUE
Whether you are toting water for them or trolling is no issue.
You do not represent support for EVGA in any capacity so Please stop telling people this is nothing when you don't know what you are talking about.
If you think it is a non-issue then please post up your proof of why you think this. Do you have a FTW3? If so it should be easy to do so. If you don't then butt out, please.

Please Forgive Me owcraftsman. Also I never Told Anyone that this is nothing.
I also have this Card, I am only saying to Wait for the Response that is given to Opolis 
 
By the Way "I would think that after 655 Post in a Single Thread and even a few other Threads this must not really be an issue that needs attention."
It was me being a Smart Butt. I guess you did not get it.
Yes I own a EVGA GeForce GTX 1080 Ti FTW3 HYBRID GAMING, 11G-P4-6698-KR, 11GB GDDR5X, HYBRID & RGB LED, iCX Technology - 9 Thermal Sensors Graphics Card.
Install on an EVGA Z370 FTW Motherboard. The AIO Hybrid II (Completed) 
 
I would think that EVGA has their hands full with getting all our Bios Update for Spectre.
No, I do not represent support for EVGA Like You We Are Only Forum Members.

Sajin

bcavnaugh

owcraftsman
If you think it is a non-issue then please post up your proof of why you think this. Do you have a FTW3? If so it should be easy to do so. If you don't then butt out, please.

Please Forgive Me.
I also have this Card, I am only saying to Wait for the Response give to Opolis 

Does your card not show the issue?

You know it does I asked you directly about it

Sajin
Yes, you asked me about it, but you didn't tell me if your card had to problem or not.

If I recall I posted I cannot go above 116%
I thought you said that all the 1080 Ti FTW3 Cards have this issue?
 

Sajin

bcavnaugh

Sajin

Alan1080ti So we can just get over this with the xoc or whatever that bios was posted before right? Ex the Asus or whatever to unlock the vol?

https://forums.evga.com/FindPost/2716750

Why has EVGA not correct this issue by now?

There are multiple responses from EVGA_JacobF in this thread.

I just let this go at the time, maybe I should not have.
Their is more going on here then being said as this Thread was Pinned at one time and is no longer pinned.
 
The Last word from EVGA_JacobF was Post #391 Thursday, December 14, 2017 1:08 PM 
Just a small update here.   This issue has been identified as an NVIDIA driver reporting issue, and is being corrected on a future NVIDIA driver update.   Sorry I don't have any ETA's or further updates at this time... will continue to update on it.
 
Maybe a MOD Can ask for an Update from EVGA.

bcavnaugh
I am not finding as "advertised" 127%
Does anyone have a link that shows this 127% on EVGA's website.
I have been Running Superposition the 8k optimized preset and have seen as high as 125% K-Boost is Enabled.
https://benchmark.unigine.com/results/rid_e2c66e28254e4ddd85fa741d03db3019


Thank you.

Hmm. Looks like your card isn't affected, or the software is just reading it incorrectly.

bcavnaugh
PXOC Shows the Same as GPU Shark Show the Same as well as GPU-Z Shows the Same Sajin
So then you are saying that NOT all Cards have this Issue.......
Thank you once more for you input.

Could you upload a copy of your vbios here for others to try? Yes, it looks like your card doesn't have the issue.

bcavnaugh

Sajin

bcavnaugh
PXOC Shows the Same as GPU Shark Show the Same as well as GPU-Z Shows the Same Sajin
So then you are saying that NOT all Cards have this Issue.......
Thank you once more for you input.

Could you upload a copy of your vbios here for others to try? Yes, it looks like your card doesn't have the issue.

I have Bios 86.02.39.01.90 what other Bios are their?
https://www.techpowerup.com/gpuz/details/5ayap

That is the correct vbios for the slave. Your vbios must have a fix included in it though as other people have been stuck around 117 to 120%.

Maybe, or maybe not. Looks like evga snuck in a fix. You just recently purchased that ftw3 from evga right?

bcavnaugh

Sajin
Maybe, or maybe not. Looks like evga snuck in a fix. You just recently purchased that ftw3 from evga right?

Right

Haha. Yep. Looks like evga snuck in a fix. 
 
People are going to want your vbios.

All you have to do is use gpu-z to save the vbios.

Just seen that you have the hybrid ftw3, and not the three fan one. 
 
Other people with the three fan ftw3 most likely won't want your vbios as it will most likely make their fans run at lower speeds.

Sajin
Just seen that you have the hybrid ftw3, and not the three fan one. 
 
Other people with the three fan ftw3 most likely won't want your vbios as it will most likely make their fans run at lower speeds.

So this applies only to the 1080 Ti 3 Fan Card?
The specs are the same on all of the cards. (Not Counting the DT Card)

Removed

bcavnaugh

Sajin
Just seen that you have the hybrid ftw3, and not the three fan one. 
 
Other people with the three fan ftw3 most likely won't want your vbios as it will most likely make their fans run at lower speeds.

So this applies only to the 1080 Ti 3 Fan Card?
The specs are the same on all of the cards. (Not Counting the DT Card)

Yes, I believe it affects all ftw3 cards, however, early in the thread Jacob showed a ftw3 hitting 127% without any issues.

bcavnaugh
 
Thank you, is this True?
Basically.  If it was working correctly it should hover around 127% instead of 117%.

Yep, it should hover around 127%.

bcavnaugh
If it had a fix in it then would it not have a different number?
The only way I could see 125% is when running Superposition the 8k optimized preset.
No other Tool went over 116% just for into.

All of us seen occasional spikes over 120%, but it is just random spikes. Average never goes over 117% and you can monitor Power %  and Power Limit graphs in XOS side by side to see what is going on.