EVGA

Helpful ReplyHot!Technical Guide and candies for RTX 2080 Ti Kingpin

Page: < 12345.. > >> Showing page 5 of 7
Author
TiN_EE
EVGA Forum Moderator
  • Total Posts : 305
  • Reward points : 0
  • Joined: 2010/01/22 21:30:49
  • Location: xDevs.com
  • Status: offline
  • Ribbons : 13
Re: Candies for RTX 2080 Ti Kingpin 2019/05/05 22:07:19 (permalink)
Try this rar one?

If you have question, please post in public forum. I do not reply PMs, so all in community can benefit the answer. 
bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/05 22:18:05 (permalink)
TiN_EE
Try this rar one?

It worked, thank you.
If I zip it up it is a larger file than the zip file you have posted.

post edited by bcavnaugh - 2019/05/05 22:21:49

Attached Image(s)



TiN_EE
EVGA Forum Moderator
  • Total Posts : 305
  • Reward points : 0
  • Joined: 2010/01/22 21:30:49
  • Location: xDevs.com
  • Status: offline
  • Ribbons : 13
Re: Candies for RTX 2080 Ti Kingpin 2019/05/05 22:28:48 (permalink)
ZIP shenanigans, my apologies. Can you try ZIP file again, I've repacked it with winrar.
WinRAR is my go to archiver, it gives good recovery and packs better :)

If you have question, please post in public forum. I do not reply PMs, so all in community can benefit the answer. 
bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/05 22:30:36 (permalink) ☄ Helpfulby TiN_EE 2019/05/05 22:33:30
TiN_EE
ZIP shenanigans, my apologies. Can you try ZIP file again, I've repacked it with winrar.
WinRAR is my go to archiver, it gives good recovery and packs better :)

The Zip File is Good to Go Now.
post edited by bcavnaugh - 2019/05/05 22:37:02


Q56_Monster
CLASSIFIED Member
  • Total Posts : 3856
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 07:31:38 (permalink)
Thanks for the goodies
 
Question:  one of my KP cards is crashing windows on start up (about 75% of the time).  I can get in sometimes, and have run a successful 3dmark once or twice.  If I do get in to windows it freezes up when I start google chrome.  Do I need to go through RMA headache or is there something else simple that will make it stable?  My other KP card works fine and both my 1080ti's work fine.  Any advice is appreciated!

Mobo: Asus Rampage VI E CPU: i9-7980XE
GPU: 2 X EVGA K|NGP|N RTX 2080 Ti's
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA 1600 T2; 2 x PC Power & Cooling 1200W OS: All of them
Monitor: LG 4K; Samsung 4K  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 

bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 07:44:20 (permalink)
Q56_Monster
Thanks for the goodies
 
Question:  one of my KP cards is crashing windows on start up (about 75% of the time).  I can get in sometimes, and have run a successful 3dmark once or twice.  If I do get in to windows it freezes up when I start google chrome.  Do I need to go through RMA headache or is there something else simple that will make it stable?  My other KP card works fine and both my 1080ti's work fine.  Any advice is appreciated!

Have you tested each card alone in your computer?
If so are you seeing the Same Issue?
Have you Tested with and without the NVLink Bridge Installed or with a Different Bridge?
Have you reversed the card location on your motherboard?
What NVIDIA Driver Version are you running and have tested with?
You might want to create your own Thread under EVGA GeForce 20/16 Series to allow others to help out.
post edited by bcavnaugh - 2019/05/06 08:42:28


TiN_EE
EVGA Forum Moderator
  • Total Posts : 305
  • Reward points : 0
  • Joined: 2010/01/22 21:30:49
  • Location: xDevs.com
  • Status: offline
  • Ribbons : 13
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 08:30:06 (permalink)
Do I need to go through RMA headache

Sounds like that's the right road, sorry. Card should start and always work, as expected.

If you have question, please post in public forum. I do not reply PMs, so all in community can benefit the answer. 
Q56_Monster
CLASSIFIED Member
  • Total Posts : 3856
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 10:17:30 (permalink)
bcavnaugh
Q56_Monster
Thanks for the goodies
 
Question:  one of my KP cards is crashing windows on start up (about 75% of the time).  I can get in sometimes, and have run a successful 3dmark once or twice.  If I do get in to windows it freezes up when I start google chrome.  Do I need to go through RMA headache or is there something else simple that will make it stable?  My other KP card works fine and both my 1080ti's work fine.  Any advice is appreciated!

Have you tested each card alone in your computer?  Yes, only single config
If so are you seeing the Same Issue?  No, 1 KP 2080 and 2 1080ti's working fine in single card
Have you Tested with and without the NVLink Bridge Installed or with a Different Bridge?
I don't have NVlink yet, so only testing single cards
Have you reversed the card location on your motherboard?  I'll try that
What NVIDIA Driver Version are you running and have tested with?The latest with the .53 hotfix
You might want to create your own Thread under EVGA GeForce 20/16 Series to allow others to help out.
Will do if I don't RMA



Thanks bc.  I responded above.  I think TiN might be right though

Mobo: Asus Rampage VI E CPU: i9-7980XE
GPU: 2 X EVGA K|NGP|N RTX 2080 Ti's
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA 1600 T2; 2 x PC Power & Cooling 1200W OS: All of them
Monitor: LG 4K; Samsung 4K  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 

bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 11:25:58 (permalink)
Q56_Monster, Bummer if you have to RMA your New Card.
425.31 seems to be the last best driver at least in my testing.


Q56_Monster
CLASSIFIED Member
  • Total Posts : 3856
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 17:01:43 (permalink)
OK, so I got this card working pretty good now.  Thanks bc, I re-seated the card and all is well now.  No more crashes.
 
http://www.3dmark.com/pr/89009
 
 Now to SLI tomorrow.  I got to say these KP cards are nice and quiet and run supper cool.  Perfect for gaming.
post edited by Q56_Monster - 2019/05/06 17:08:24

Mobo: Asus Rampage VI E CPU: i9-7980XE
GPU: 2 X EVGA K|NGP|N RTX 2080 Ti's
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA 1600 T2; 2 x PC Power & Cooling 1200W OS: All of them
Monitor: LG 4K; Samsung 4K  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 

bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 17:06:50 (permalink)
Q56_Monster
OK, so I got this card working pretty good now.  Thanks bc, I re-seated the card and all is well now.  No more crashes.
http://www.3dmark.com/pr/89009


https://www.3dmark.com/compare/pr/89009/pr/86587/pr/81238
post edited by bcavnaugh - 2019/05/06 17:11:33


TiN_EE
EVGA Forum Moderator
  • Total Posts : 305
  • Reward points : 0
  • Joined: 2010/01/22 21:30:49
  • Location: xDevs.com
  • Status: offline
  • Ribbons : 13
Re: Candies for RTX 2080 Ti Kingpin 2019/05/06 18:57:52 (permalink)
Great, Happy to be wrong in this case :)

If you have question, please post in public forum. I do not reply PMs, so all in community can benefit the answer. 
k|ngp|n
EVGA Forum Moderator
  • Total Posts : 134
  • Reward points : 0
  • Joined: 2010/11/04 18:34:13
  • Status: offline
  • Ribbons : 5
Re: Candies for RTX 2080 Ti Kingpin 2019/05/07 05:50:56 (permalink)
Hey Tony! :) 

 
Q56_Monster
CLASSIFIED Member
  • Total Posts : 3856
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re: Candies for RTX 2080 Ti Kingpin 2019/05/07 20:32:55 (permalink)
Hey Vince! :)   I missed the postman today :(....new gpu brackets from your store.

Mobo: Asus Rampage VI E CPU: i9-7980XE
GPU: 2 X EVGA K|NGP|N RTX 2080 Ti's
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA 1600 T2; 2 x PC Power & Cooling 1200W OS: All of them
Monitor: LG 4K; Samsung 4K  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 

Q56_Monster
CLASSIFIED Member
  • Total Posts : 3856
  • Reward points : 0
  • Joined: 2007/11/02 11:03:10
  • Location: Philly 'Burbs
  • Status: offline
  • Ribbons : 5
Re: Candies for RTX 2080 Ti Kingpin 2019/05/09 17:14:08 (permalink)
Got brackets Vince ;), Thanks man

Mobo: Asus Rampage VI E CPU: i9-7980XE
GPU: 2 X EVGA K|NGP|N RTX 2080 Ti's
HD: Samsung 1TB 970 Pro NVMe M.2
PSU: EVGA 1600 T2; 2 x PC Power & Cooling 1200W OS: All of them
Monitor: LG 4K; Samsung 4K  Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion 

mattaman10
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/09/26 23:58:15
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/20 14:55:32 (permalink)
What is everyone getting not using the classified tool and just using precision x1?

I cant seem to get this card stable past 2130-2145mhz? I've even bought a new power supply as Evga tech support suggested. Power limit is maxed out, I tried every voltage setting in X1, and
I am even using the Ln2 bios (flashed to the OC bios position). Temps are 40C at full load on GPU and 46 degrees on memory during stress tests. Please help as I'm really not impressed by the results I am getting.
bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/20 14:59:40 (permalink)
@mattaman10,
I am Using the LN2 Bios (Not the XOC Bios) on the OC Bios for Full Fans and seeing 2160MHz-2190MHz without using the Classified Tool.
But today it is really cold and only 10°C in the room I am Benchmarking in ATM.
This mornings runs @ M=1100 G=110 in PX1 0.3.17.0 Gaming at 2,145 MHz - 2,160 MHz will be a breeze as long as you have the CPU Power. 
Depending on the Benchmark being DX12 & (RT) or DX11 and even DX10 and DX9 performance will be different across different Games. 
https://www.3dmark.com/spy/7233549
https://www.3dmark.com/spy/7233772
https://www.3dmark.com/pr/94231 HOF #75
https://www.3dmark.com/fs/19383457
https://www.3dmark.com/fs/19383526
https://www.3dmark.com/fs/19383588
https://www.3dmark.com/nr/117068 HOF #61
https://www.3dmark.com/sd/5554919
https://www.3dmark.com/cg/4532171 HOF #99
https://www.3dmark.com/is/4574343
https://www.3dmark.com/is/4574344
https://www.3dmark.com/is/4574347
https://www.3dmark.com/3dm11/13315407
https://www.3dmark.com/3dm11/13315410
https://www.3dmark.com/3dm11/13315417
https://www.3dmark.com/3dm06/18093273 HOF #60
https://www.3dmark.com/3dmv/5764264
https://www.3dmark.com/3dmv/5764266
https://www.3dmark.com/3dmv/5764267
https://www.3dmark.com/vrpor/326381
https://www.3dmark.com/vrpcr/29703
https://www.3dmark.com/vrpbr/58668
 
Now Running  M=1200 G=120 in PX1. 2,175 MHz
https://www.3dmark.com/spy/7235967
https://www.3dmark.com/spy/7236268
https://www.3dmark.com/pr/94317
https://www.3dmark.com/fs/19385154
https://www.3dmark.com/fs/19385175
https://www.3dmark.com/fs/19385200
https://www.3dmark.com/nr/117125
https://www.3dmark.com/sd/5555075
https://www.3dmark.com/cg/4532239
https://www.3dmark.com/is/4574397
https://www.3dmark.com/is/4574399
https://www.3dmark.com/is/4574400
https://www.3dmark.com/3dm11/13315534
https://www.3dmark.com/3dm11/13315543
https://www.3dmark.com/3dm11/13315545
https://www.3dmark.com/3dm06/18093293
https://www.3dmark.com/spy/7233549
https://www.3dmark.com/3dmv/5764306
https://www.3dmark.com/3dmv/5764308
https://www.3dmark.com/vrpor/326444
https://www.3dmark.com/vrpcr/29710
https://www.3dmark.com/vrpbr/58679
 
post edited by bcavnaugh - 2019/05/20 21:49:49


AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 5529
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 18
Re: Candies for RTX 2080 Ti Kingpin 2019/05/20 18:05:44 (permalink)
mattaman10
What is everyone getting not using the classified tool and just using precision x1?

I cant seem to get this card stable past 2130-2145mhz? I've even bought a new power supply as Evga tech support suggested. Power limit is maxed out, I tried every voltage setting in X1, and
I am even using the Ln2 bios (flashed to the OC bios position). Temps are 40C at full load on GPU and 46 degrees on memory during stress tests. Please help as I'm really not impressed by the results I am getting.


Install Afterburner..Set up the OSD. Close it. Then open PX1 and set the fans/power/voltage to max hit apply and close it. Then open afterburner.. check that the voltage and power limit are maxed. Then open the curve. Think its press Control+ F?

Select the dot for 1.093v and raise it to what you want to try for.. say 2160 or 2190 or 2205mhz and before you hit apply press control+p which will being up a ventricle yellow line. Then hit apply to lock it in. Kinda like locking in the voltage.

Test it out.

Px1 dont seem to use the max voltage.. for me it's like locked at 1.050v.

You can also use the classified tool and the top voltage is for GPU. You can lock the voltage at 1.093v and change the Loadline voltage to say 0 or 1.. hit apply. Low numbers keep the voltage droop to a minimum.

I still like to use AB with the classified tool and lock the voltage in with the classified tool. Setting the overclock curve with AB, it will report only the voltage you set for in AB.. so it can say 1.093v I
On the on screen display but it's not the real voltage which will be what you selected in the classified tool.. should hook up a dmm to the card to read the actual voltages during idle and load.

Intel i9 9900K @ 5.2Ghz Dual Custom Water Loops.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N   
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Tower 900 w/ 2x EK D5 pump/Res combo, 2 EK XE 480 rads.
vladdimplr
New Member
  • Total Posts : 50
  • Reward points : 0
  • Joined: 2017/10/05 19:11:04
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/20 22:51:06 (permalink)
The AB trick may push it further, but this is without the classified tool being used, mem +1300, gpu +105
 
https://www.3dmark.com/3dm/36254668
bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/20 22:58:46 (permalink)
vladdimplr
The AB trick may push it further, but this is without the classified tool being used, mem +1300, gpu +105
https://www.3dmark.com/3dm/36254668

https://www.3dmark.com/compare/pr/94402/pr/94317
Move over the PR to see if I can match yours.
https://www.3dmark.com/compare/spy/7238047/spy/7237906/spy/7237877 
 
I have no apps running in the background not even PX1.
Maximum turbo core clock 5,103 MHz gives you the edge.
 
My PX1 Setting M=1350 G=145 
>>> I run the same settings 3 times on the same Benchmark, got this tip from Zeddivile  <<<
Here you go https://www.3dmark.com/compare/pr/94403/pr/94404 Sorry Got you by 5
https://www.3dmark.com/compare/pr/94403/pr/94404/pr/94406 Hit 9921 Crashed on the 3rd run
My PX1 Setting M=1350 G=150 (Under Description I put my settings used)
https://www.3dmark.com/compare/pr/94402/pr/94404/pr/94406/pr/94410 9953 2,220 MHz 1 run crashed running 3rd run now, Crashed
Going with M=1400 G=145
https://www.3dmark.com/pr/94414 9969  G:2,190 MHz M:2,100 MHz
 
Next Going with M=1450 G=149
Going to see if I can hit 10,000 on PR tonight.
 
I do not want take away from this Thread to much "Candies for RTX 2080 Ti Kingpin"
So I will add more to this Post.
 
PS All without using the Classified Tool.
 
 
For Gaming I only run my CPU @ 4600MHz and GPU @ 2145-2160MHz
But summer is coming even though it is Snowing ATM, we have about 2 inches now.
 
On the Crash Crash
I ran the CPU 1 Test from 3DMark Vantage Performance (Only the CPU) upped my vCore until I could pass it and that is where I am at now.
I won't say it is at 1.365. But ATM not seeing temps above 60°C and it is now 5.7°C in the room
Intel Core i9-7920X Processor 3DMark rank 5 Nice CPU Info on the Links
The Intel Core i9-9900K Processor 3DMark rank 6 is doing very well and most users are killing me.
But is doing a Killer compared to the Intel Core i7-8700K Processor and this I have in a Z370. Maybe time to update to your CPU if my MB supports it.
post edited by bcavnaugh - 2019/05/21 00:23:36


vladdimplr
New Member
  • Total Posts : 50
  • Reward points : 0
  • Joined: 2017/10/05 19:11:04
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/20 23:00:41 (permalink)
bcavnaugh
vladdimplr
The AB trick may push it further, but this is without the classified tool being used, mem +1300, gpu +105
https://www.3dmark.com/3dm/36254668

https://www.3dmark.com/compare/pr/94402/pr/94317
 




https://www.3dmark.com/3dm/36254863
closed apps down in background 
7920x at 5.0 is bad ass! I can't get stable at 2175 unless its just a pass through 3d mark, gaming it crashes almost instant :( hoping hydro copper block cools it enough to game around 2200 (optimistic)
 
https://www.3dmark.com/3dm/36255027 @2175
 
What voltage settings are you using in classified? I want to try it out see if I can pass 2200
 
Without classified? oooooooooh, I'm going to try as well, no go at +135, crash crash crash, voltage in classified to 1.15 LL10 crash LL5 crash, I keep mine at 5.1 all around, beefy cooling but it has 4 less cores than you!
post edited by vladdimplr - 2019/05/20 23:21:40
mattaman10
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/09/26 23:58:15
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 12:29:50 (permalink)
Does anyone have the latest firmware for this card? Not BIOS but firmware
bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 12:41:45 (permalink)
mattaman10
Does anyone have the latest firmware for this card? Not BIOS but firmware

It comes with PX1 0.3.17.0 and is the current version
You will find the file under \Program Files\EVGA\Precision X1\Firmware
You can update inside of PX1 as well.

post edited by bcavnaugh - 2019/05/29 12:46:49

Attached Image(s)



mattaman10
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/09/26 23:58:15
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 12:48:50 (permalink)
Yeah I had 2B.FA.39, but now I have 2B.FA.3F as I manually updated it which was a mistake lol
bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 12:55:49 (permalink)
mattaman10
Yeah I had 2B.FA.39, but now I have 2B.FA.3F as I manually updated it which was a mistake lol

The Update is not working from within PX1?


mattaman10
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/09/26 23:58:15
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 13:06:38 (permalink)
Oddly no, it's just asking for me to pick a firmware file from a list, and that's how I ended up in this mess lol
mattaman10
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/09/26 23:58:15
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 13:07:57 (permalink)
It's not prompting me to update when opening Precision X1 either
mattaman10
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/09/26 23:58:15
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 13:15:35 (permalink)
I should clarify that the .39 firmware is not in the file of firmware. 3F was the only one it was able to update to.
bcavnaugh
The Crunchinator
  • Total Posts : 37517
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 271
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 13:17:51 (permalink)
mattaman10
It's not prompting me to update when opening Precision X1 either

Click Update, I see we need to know the File Name......

post edited by bcavnaugh - 2019/05/29 13:20:41


mattaman10
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/09/26 23:58:15
  • Status: offline
  • Ribbons : 0
Re: Candies for RTX 2080 Ti Kingpin 2019/05/29 13:20:26 (permalink)
Yup, that's when it brings up a list of firmware files, and the only one that worked was 3F, and .39 is no where to be found
Page: < 12345.. > >> Showing page 5 of 7
Jump to:
  • Back to Mobile