mattaman10Yup, that's when it brings up a list of firmware files, and the only one that worked was 3F, and .39 is no where to be found
mattaman10wait so 3F is the newest! yeah im dumb to not notice dates in the files. I got the help I need so we're good. thanks!
bp7178I'm really liking the KPE. I managed to beat my old Superposition score and hit 10521 in Port Royal with the stock AIO cooler. My old FE card with the Micron memory would do +1000, the KPE is +1400. I had two FE cards, the other wouldn't do over +800 without artifacts. https://www.3dmark.com/pr/100779 Waiting on a water block. I got it to complete a run with a +160 offset, but temps hit 55C at the end. It only scored 10372. Which was 1.250 (1.2000 in Classified tool, +50mv via dipswitch. Got right at 600w as displayed on the OLED screen. 8086k @ 5.4Ghz/4,000Mhz DDR4 16GB Asus Z390 Formula (Likely going to be a Z390 Dark soon with a 9900KS when it drops) Corsair 1600i 68F Room Temp
TiN_EELatest firmware is FA3F (hex value). I've added it to the guide.Also magic candy got new super-secret function to improve VRM behavour for sub-zero and LN2 benchmarking.
TiN_EEOther cards updated automagically when PX1 detects they run older firmware, than PX has.There are no plans to make HC specific BIOS, I'm not sure what benefit that would give compared to current KPE BIOSes.
TiN_EEDidn't know that, will check, thanks.
TiN_EEWe have a fix, will be in next PX1/FW release after QC check.
ZeddivilePerseverance is a key to success Therefor anyone know what the rear card side micro-USB located near the 8-pins of the RTX KPE is for?
ZeddivileThat's the front USB C. It's my understanding that the usb micro interface could not support virtual link. I have a room dedicated to HTC Vive btw. Not to VR flex but ya VR FLEX
ZeddivileYes. I have read through the 980ti kpe and 1080ti kpe xdevs. Johnksss and I were thinking this was the case but then TiN chimmed in and said something like NO SERIAL this gen. He also said he would cook a RPI app and maybe meant to be interfaced with the micro USB we are talking about. I am just trying to gain as much info as I can about it before digging into it myself. Having to much fun with the Icon pot and ugh maybe I just need to buy a 2nd KPE while they are in stock to play with...
TiN_EEYou didn't update to latest version from guide?
splaveHi I was directed here by Gregory Olesky to ask for the p0 force tool used in the jayz vs gamers Nexus video! Thank you look forward to it.
ironbrillopadI am also very interested in the p0 force tool