XrayMan
Insert Custom Title Here
- Total Posts : 63846
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/03/26 22:14:33
(permalink)
Cool GTX
More Great photos
Nice update on your build
+1 Awesomeness. 
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A   
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/03/28 14:20:42
(permalink)
Thank you buddy. Today I made the rear fixing of the card. Ahh, i love this surface after milling :)  Oxidized aluminum rods - these will be supports.   Mounted.     Yes it is ... looks. 
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/03/29 13:33:26
(permalink)
At the back of the card are three holes under the M3 screw. One used for the third stand. The card is now suspended in the air and does not crush the riser.   
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/01 00:24:47
(permalink)
I like how you suspended the card, that looks awesome!
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/01 08:28:32
(permalink)
TXH!! :) On one of the coolers I have to put one tube underneath the CPU block. It is so tight that without modifications it will not work.  The solution would be to drill a new fillport hole in the right place, but there are holes in the factory, so there is no room for another hole. I had to make an angle fillport of the right height and with the ability to rotate (I have not done so yet).   Almost pressing - the distance between the fillport and the coupler in the radiator is less than a millimeter.  ... but somehow succeeded.  I also start earning tubes - no one will be bent, because I hate to do it, and under the deck I will combine all the snakes.  Covert backwards.  Done. 
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/01 09:22:07
(permalink)
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/02 15:02:15
(permalink)
I need some advice. :) I'm starting already submitted.  
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/03 16:04:12
(permalink)
At the suggestion of my friend Patrick, today I also made Custom screws on the CPU block. Originals look like this.  Custom screws look like this.  We lay down - below the deck some cables (I do not like them) and several connections of the liquid cooling system (5 fillports, 2 coolers and pump). 
|
notfordman
Omnipotent Enthusiast
- Total Posts : 8772
- Reward points : 0
- Joined: 2007/08/09 23:52:23
- Location: In a van, down by the
- Status: offline
- Ribbons : 28
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/04 22:01:51
(permalink)
Dumb question time.... Does the left tube from CPU clear RAM?? I'm betting it does. Such a nice project!!! I do like the look of the CPU tubes. Very nice craftsmanship! 
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/08 03:49:59
(permalink)
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/10 15:14:54
(permalink)
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/11 04:23:47
(permalink)
|
zophar
CLASSIFIED Member
- Total Posts : 4749
- Reward points : 0
- Joined: 2008/08/26 09:48:56
- Location: KC,MO
- Status: offline
- Ribbons : 26
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/15 19:41:54
(permalink)
Awesome work and beautifully done. Thank you for sharing with us, and great job on the detail in the photos.
|
MDeckerM
FTW Member
- Total Posts : 1683
- Reward points : 0
- Joined: 2015/09/21 17:32:43
- Location: RwlRwlRwlRwl
- Status: offline
- Ribbons : 8
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/15 19:58:00
(permalink)
so many amazing build photos in here! Love it
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/16 12:31:18
(permalink)
Thank you!!! Super feeling to know that you like someone. There are still some pics that show a benchtable profile.    Now it's time to build Dark Base Pro 900. In May, the computer goes to the fair to the Netherlands, and in June I go with them (benchtable + Dark Base) to Mikolow on evet and the premiere of the book about modding. Of course, I want to thank the supporters, especially EVGA, who is able to listen, understand the idea of projects and appreciate the hard work after hours :) - THANK YOU !!!!! I have already started developing another project. It will be .... big! Beyond the build (pc computer) with my custom reserver, you will create a whole stand - desk top, monitor, oh ...... will happen. I hope I can achieve this project. IT'S NOT OVER YET ! ! ! ! :)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/16 12:41:56
(permalink)
This is so impressive and professionally made. If I had the money I'd ask you to build me a mod.
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10126
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/16 13:07:24
(permalink)
OMG, this look excellent. I really like this mod. I still think and plan for Intel new chipset in Juny/July in Mac G5. Colors, Black/Silver(Grey) very small amount of Red. Only 100% known hardware will be my EVGA 1200 P2 with Black sleeve Black Cables. I like thin wires and cables and that's exactly EVGAs set. Mobo maybe mATX maybe E-ATX. GPU GTX1080Ti, or GTX1080, CPU ??? This is one of nicest GPU mask available, for me. And Hybrid. Look great with silver... really fit nice in modern cases and bench tables. Anmd EVGA Z270... EVGA motherboards are somehow... I don't know they fit with any mod perfectly. No matter on color scheme or style.  Really great mod. Later could be used with different hardware and little modification. Only every 7 days to clean with Air spray because dust. Once a week one can and that's it. Hardware will stay clean forever.
post edited by Vlada011 - 2017/04/16 13:16:52
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/23 07:12:10
(permalink)
THX!!!! :) I agree with you 100%. Dust is everywhere. For me also no problem to once a week or even more often vacuum benchtable - it's even a pleasure to take care of the equipment .... such equipment :) In this post I want very, very, but thank you very much Team EVGA for prompt and effective intervention. There was a problem delivering the EVGA DDR4 memory package that was scheduled in this setup - they are already in place :)      
post edited by SKEEPER. - 2017/04/23 07:30:21
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/23 07:37:52
(permalink)
Glad to see the memory at last.
|
Tech_RayH
SSC Member
- Total Posts : 834
- Reward points : 0
- Joined: 2016/05/13 10:03:33
- Status: offline
- Ribbons : 7
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/23 08:49:20
(permalink)
Awesome build! I have never liked how big GPUs mount, your solution is great
...an untrammeled flow of words in an open forum. - Adlai E. Stevenson
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/04/23 09:34:57
(permalink)
EVGATech_RayH
Awesome build! I have never liked how big GPUs mount, your solution is great
+1
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/02 08:15:33
(permalink)
Thank you so much for the warm words and for the plus :) The memories are in place, so I present you the final benchtable version, but to be not boring, there will be another perspective :) Look at yourself.        Technical data Case - Phobya WaCoolT Benchtable black - Aluminium Edition Motherboard - EVGA Z 270 FTW K Graphics Card - EVGA GTX 1080 GAMING SSD - 2 x GOODRAM IRIDIUM PRO 240GB RAM - EVGA DDR4 2666 16GB (4x4) PSU - SEASONIC PRIME TITANIUM 650W Liquid cooling system: Reservoir - custom SKEEPER Connectors - Alphacool 16mm (acrylic tubes) 2 x Phobya HPC 360mm Pump - Alphacool VPP755 rev.2 CPU water block - Phobya UC-2 2 x Cape Cora 6 x Alphacool NB-eLoop 1200rpm Controller - Phobya Touch 630 Combs - Alphacool Customs: Front, rear, aluminum washers, water block nuts, lighting, fillport, sleeve, arrangement of components (power supply, pump, cape cora, graphics card, coolers HPC....). ...... and dozens of hours of work.
post edited by SKEEPER. - 2017/05/02 08:58:12
|
nikkocortez
CLASSIFIED Member
- Total Posts : 2625
- Reward points : 0
- Joined: 2010/02/01 10:04:03
- Status: offline
- Ribbons : 14
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/02 08:46:16
(permalink)
Outstanding work! Very clean machining work.
|
GhostImage
iCX Member
- Total Posts : 361
- Reward points : 0
- Joined: 2008/09/21 11:49:30
- Status: offline
- Ribbons : 2
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/21 11:05:52
(permalink)
One of my favorite mods. I love the look of this build. Kinda looks like a racing car engine compartment. Especially seating flat. Some mad skills here bro. Way to go. Id like to see some more stuff from you. Edit: Spelling
post edited by GhostImage - 2017/05/21 17:17:08
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/21 13:43:48
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 85038
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/21 22:47:05
(permalink)
Such fantastic work. You have some great talent.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/22 13:59:24
(permalink)
Very nice build
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
quadlatte
CLASSIFIED ULTRA Member
- Total Posts : 5427
- Reward points : 0
- Joined: 2006/09/14 16:52:58
- Location: Greensboro, NC
- Status: offline
- Ribbons : 56
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/25 00:06:56
(permalink)
im digging that reservoir
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8899
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/25 00:29:26
(permalink)
Very impressive build with great end results.
|
SKEEPER.
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2017/02/05 10:57:52
- Status: offline
- Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]
2017/05/28 13:41:06
(permalink)
I was embarrassed ........ thank you gentlemen! Such a small cut before continuing the next project. 
|