EVGA

Hot!SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]

Page: < 12345.. > >> Showing page 2 of 6
Author
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/05 13:14:19 (permalink)
REIME NORIS - Dies and taps
 

 

 

 

 

#31
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/05 13:17:05 (permalink)
The last photo the most important size in modding - Set G1 / 4 "
 

 

#32
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/05 13:25:09 (permalink)
After this brief curiosity, which I hope you do not bored, back to work!
Now let's reservoir.
Fitting tube.

 
Centrally in the middle will be the filler cap.

 
Following the submission looks like.

 

#33
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/05 13:29:11 (permalink)
Reservoir for the project is already finished.
A few technical data.
- The diameter of the tube 60mm
- Diameter of the left ventricle and right 70mm
- Length 295mm
 
 
My cherry on the cake :)
 
 

#34
malVizio
CLASSIFIED Member
  • Total Posts : 2405
  • Reward points : 0
  • Joined: 2011/09/26 10:24:30
  • Location: Affiliate code: A83U9ZY5VO
  • Status: offline
  • Ribbons : 8
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/05 23:29:44 (permalink)
Impressive job!!!

Case:Silverstone FT02 
M.B.:EVGA DARK X79/PSU: Corsair HX1000 
GPU:EVGA GTX980Ti SC /RAM:32GB DDR3 Corsair 
CPU:Intel i7 3930K+Noctua NH-D14
FANS:3xSilverstone SP200mm 
SSD/HDD:2xSamsung EVO 850 256/1xPNY 256gb/Seagate 500gb
MICE:Razer DA Elite/KB:Collermaster Rapid I/
HP:Shure SRH440/Logitech G633
Screen:Dell Ultrasharp 2711U
#35
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 01:30:55 (permalink)
Oh, thank you very much.
I'm glad you like it.
 
 
On gif see well reservoir handles (one on the left is more visible) - brackets are quite broad, I wanted to be just within the outline of the black acetal cork, so as not to overlap the cap of plexiglass and tube, so needed to slim down about 1.5 mm.
 

 
Slide-out bottom tray benchtable has a lot of holes, so that we have a large freedom to mount the power supply, drives, and other sh.
Place on the pump, which I planned, but did not have any of the mounting hole, so we had to make a new hole, of course, to the possibility of longitudinal smooth adjustment.

 
The pump is mounted by means of the grip - :D CLICK
It fits perfectly, keeps a very tight and you only need one screw for mounting. There is also a small possibility of adjusting the pump - you can slide it into the handle deeper or shallower.
 
Yes shapes slowly front.

 
#36
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 01:46:22 (permalink)
Before I show you how established front, take a closer look controller Phobya Touch 630, which will be on the front and the pump Alphacool VPP655 with TOP plexiglass v.3
 


 

 

 

 

 

 

 
 and pump.
 

 

 

 

 

 

 

 

 

 

 
#37
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 01:47:40 (permalink)
If a large number of photos is bothersome to you, please let me know.
#38
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 02:12:45 (permalink)
Front.
 
After the initial measured off the appropriate piece of plexiglass, begin machining.
 
The first openings are fillporty.

 ..and reaming to the appropriate diameter.

 
Well sharpened steel HSS leaves a smooth wall of the hole - I like it!

 
After first trying on, we put another dimension (I did it in stages, because a mistake costs a few days of work).

 
After the application of the other dimensions (windows on the control panel and pump TOP) ...

 
... We cut what you need.

 
fits :)

 
Smooth walls of the holes and windows matt with.

 

 
Trying on.

 
As you can see in the above image, fillports at the front are very deep.
Therefore needed distances.

 
Above fillports will masking is made of aluminum angle.
Fillports are near the top, so you had to do notch in the mask.
 

 
Beautifully work out.

 

 
#39
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 06:21:47 (permalink)
Small interlude.
My dear, June 30, 2017 is the premiere of the book in which you will find many things about modding - its history, principles, differences and many other interesting information.
The book is intended for All, for laymen and professionals.
I have great pleasure to tell you that you will find in them also about my works, reservoirs and professional builds our group Unique Customs.
Since we are modding children from around the world, I know that the book will be translated into English, German, French, so the language barrier was taken into consideration!
 
CLICK!
 

#40
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 09:36:23 (permalink)
Front will be glued to the black film (brushed), which will put my logo.
Logo done, of course, our resident master laser .... Elder.

 

 

 
Plexiglas on front already veneered.
Now you need to cut this and that, for example, holes fillport.

 
...
just like that

#41
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 09:49:51 (permalink)
Done.

 
Above mentioned earlier fabric grill.

 
#42
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 09:54:21 (permalink)
Through this black front, bench became a big block.
To reduce some optically added at the bottom of the front aluminum strip.

 

 

 
4 pads, aluminum - front screwed.

 

 
Front, of course, will be (is) backlit.

 

 
#43
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/06 10:20:05 (permalink)
Love that lighting effect in the last picture in post 43

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



#44
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/08 00:03:09 (permalink)
I'm glad you like it.
 
Despite the fact that the lighting will be only in white, the driver I will apply, so that will can be adjusted independently 3 backlight sections (two sides + front). When the computer on your desk, you will be able to shine the light of varying intensity steady so as not to tired eyes - subdued lighting and soft and very slow pulse.
In contrast, when computers will be on events, you will be able to let go of the true disco so eye-catching - strobe, rapidly changing backlight independent sections, mixed modes, etc.
 

#45
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/11 04:48:34 (permalink)
This project continues to evolve nicely.

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



#46
samca
New Member
  • Total Posts : 68
  • Reward points : 0
  • Joined: 2017/02/20 02:20:45
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/11 05:34:35 (permalink)
this is soooo awesome man :O


#47
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/11 15:03:59 (permalink)
Thank you very much! 
 
Lighting is already done.
Phobya benchtable will have only white light (such LED strips have been applied), but thanks to the IR driver for the LED strip RGB got 3 separate zones backlight.
They will be
- Front + reservoir - at the reservoir will be two rings Alphacool. Rings have RGB, but mined with them only white.
- left side
- right side
Light effects will try to show you in a few days.
But at the moment my work stood in the place - not arrived to me the most important part of the PC, without which work can not.
Very, very many things in this project is custom made, so the parts I need are the measurements and visual inspection.
 
... Thus we are waiting.
#48
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/12 12:00:22 (permalink)
Personalization reservoir.
For personalization will use one of the badges made by Elder.
The round, 12mm diameter, 1mm thickness.
Before the appeared on reservoir passed through a small processing (for edges on the perimeter).
On the left before the treatment, right after the treatment.
 

 
Logo has a slightly protrude, so I made the recess to 0.75mm.
 

 

 
Done.
 

 

#49
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/12 12:38:23 (permalink)
Reservoir ready.
 

 

 

 

 

#50
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/12 12:43:26 (permalink)
Fantastic skills.

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



#51
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/19 06:57:32 (permalink)
Thanks!!!  
 
The project will change, namely the pump will Alphacool VPP755 Rev. 2.
Who had been in contact with these pumps knows that this is probably the best pump for liquid cooling - are very, very quiet, they are well balanced, vibrations are minimal and are very strong.
Alphacool very tried with these pumps - Bravo !!!!
And under the effect of yesterday's photo session - the Alphacool VPP 755 Rev. 2
 

 

 

 

 

 

 
#52
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/21 04:01:33 (permalink)
There is one, only one graphics card ...
...which according to my measurements fit this design IDEAL !! :)
 
EVGA GTX 1080.....thanks Eddie/VGA :)
 

 

 

 

 











#53
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/22 08:48:42 (permalink)
In the Phobya benchtable will be two SSDs.
 
GOODRAM Iridium PRO 240GB
 

 

 

 

 

#54
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/22 23:46:10 (permalink)
MOBO
EVGA Z270 FTW K - bed for my Goddess (GTX 1080 :))
 

 

 

 

 

#55
notfordman
Omnipotent Enthusiast
  • Total Posts : 9387
  • Reward points : 0
  • Joined: 2007/08/09 23:52:23
  • Location: In a van, down by the RIVER!!!!!!!!
  • Status: offline
  • Ribbons : 24
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/24 18:06:14 (permalink)
Beautiful work! You have very good photography skills. I think the more pictures you have with your build log makes it better. It shows your work and progress. Very nice images. A good tool is very important, if you want to be precise. I really enjoy seeing your work, you are very skilled! Must train the cat to help! I do have one question on the passive coolers. Are they aluminum? I thought this may cause an issue in your loop if they were. I don't know, I am just wondering. Thanks for showing your craftsmanship. 
#56
Cool GTX
EVGA Forum Moderator
  • Total Posts : 23979
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Folding for the Greater Good
  • Status: offline
  • Ribbons : 117
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/24 18:16:59 (permalink)
Very Nice build

RTX Project EVGA X99 FTWK-5930K@4.8GHz 2xEVGA2080Ti EVGA-1200P2  Nibbler EVGA X99 Classified-5960X@4.5GHz 3-GPU Water Loop 1600P2 
AIO Folding  X99 2x1080Ti FTW3 Hybrid, 1200P
Thank You for Your Support


#57
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/26 16:40:34 (permalink)
First of all thank you very much for the words of appreciation - I am glad.
notfordman
Are they aluminum? I thought this may cause an issue in your loop if they were. I don't know, I am just wondering.
Probably the so-called electro corrosion. 
A good note and of course you are absolutely right that the loop in which aluminum and copper occur can occur and I do not exclude it.
However, I would like to explain my progress - this project is mainly created for events and books. We can quote the Mayhems Aurora here - it is not suitable for everyday use, but as a showcase.
I used to use aluminum radiators, heaters, air conditioning coolers, and I did not feel any electrocorrosion problem (maybe because I made a lot of that and liquid in the system and the chambers changed very often).
In any case, the corrosion process is very slow, so I'm not afraid of anything :).
 
Continuation of work.
 
"Cart" on SSD "
Factory benchtable place for discs has under deck.
To be able to expose them, one had to make a stick - I used for this aluminum profiles.
Measurement.

 

 
... and hatched something like that.

 

 

 

 

 
The card even fits well.
 

 

 
The arrangement of the components will be such.
 

 

 
 
post edited by SKEEPER. - 2017/03/26 16:44:12
#58
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/26 16:46:11 (permalink)
The CPU will be a Phobya UC2 block.


 

 

 

 

 

 

 

 
Today I checked what shines and what does not.
When it comes to MOBO, besides the lights and the code display, the only decorative light is the red strap (to swallow).
 

 
The only light effect of my Goddess is the subtle highlight of the logos and card model ... in addition to white - perfect!
 

 
Headgear for EVGA that it has not made of these products that celebrate the RGB luminosity, shimmering Christmas trees - I appreciate it!
#59
Cool GTX
EVGA Forum Moderator
  • Total Posts : 23979
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Folding for the Greater Good
  • Status: offline
  • Ribbons : 117
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/03/26 17:01:49 (permalink)
More Great photos
 
Nice update on your build

RTX Project EVGA X99 FTWK-5930K@4.8GHz 2xEVGA2080Ti EVGA-1200P2  Nibbler EVGA X99 Classified-5960X@4.5GHz 3-GPU Water Loop 1600P2 
AIO Folding  X99 2x1080Ti FTW3 Hybrid, 1200P
Thank You for Your Support


#60
Page: < 12345.. > >> Showing page 2 of 6
Jump to:
  • Back to Mobile