EVGA

Hot!SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA]

Page: < 12345.. > >> Showing page 4 of 6
Author
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/05/28 13:52:38 (permalink)
In the meantime, I upload a photo of a power supply that will be used in one .... maybe two projects;)
EVGA SuperNOVA G3 1000 W.
 

 

 

 

 

 

#91
Sleinous
EVGA Forum Moderator
  • Total Posts : 7746
  • Reward points : 0
  • Joined: 2010/06/12 12:22:01
  • Location: Paris, France
  • Status: offline
  • Ribbons : 32
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/05/28 15:05:17 (permalink)
love the work that's gone into this one

My Affiliate Code: GL1IAAFWJF
#92
rightwingpsycho
Superclocked Member
  • Total Posts : 120
  • Reward points : 0
  • Joined: 2017/05/26 21:14:00
  • Status: offline
  • Ribbons : 0
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/05/31 18:53:48 (permalink)
Wow.... Talk about detail!!!!!

My Affiliate Code: RQRXYON95O EVGA Z270 Classified, Silicone Valley delidded 7700K 5.2ghz, EVGA 64gb (4x16) 3200mhz ram (from Micro Center, Atl.), EVGA 1600 T2 power supply, 1tb 960 pro ssd, 1tb 850 pro ssd (storage), WD Red 4tb HDD (storage), EVGA CLC 280 CPU water cooler, two EVGA GTX 1080 Ti FTW3 Hybrid Gaming in SLI, EVGA DG-87 Case, Windows 10 Pro
#93
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/03 15:11:04 (permalink)
In the meantime.
 

 
post edited by SKEEPER. - 2017/06/03 15:17:27
#94
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/04 00:03:05 (permalink)
For a long time I do not have a desk, table ...... in general no convenient position, where I can comfortably use the laptop.
Watching the desks in stores, with the budget (about 700zł), unfortunately none of my requirements. Something was missing.
So I decided to build them myself, from scratch, the ones I want and which allow me finance.
 
Required items ordered, delivered:
 

 

 
One of two worktops - 160cm x 75cm x 3.8cm


 
Wood for supports and cable troughs.


 
Dimension
 

 
We cut to the dimension.


 

 
We sharpen the sharp edges.


 
We drill holes for screws.


 

 

 
Supports ready.



Now we will deal with the top.


 
We will mark where will be the supports, LED profiles and cable troughs.


 
The place under the trough milled - the deck is quite thick and can be trough into it, so it will not stand still (though it will not be visible anyway).


 

 
The trough slightly protrudes, so in the supports it was necessary to maneuver a place on this protruding part of the trough.


post edited by SKEEPER. - 2017/06/04 00:21:41
#95
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/04 00:33:35 (permalink)
This is going to be interesting.

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



#96
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/04 02:43:51 (permalink)
I hope you will be interested.
Simple, relatively fast construction desk at a relatively small cost.
 
Troughs for LED profiles made.
 

 
... and additional cables.
 

 
Backlighting of the desk:
 
The easiest solution is to stick the tape itself to the back of the tabletop, to bring it to the wall and ready.
 

 
but
 

 
I want to have no distance between the wall and the tabletop and the backlight does not go down and up simultaneously.
From below, the countertop will be illuminated only on the front and on the sides, while the rear LED strap is to throw light only upward, but not to blind, so I decided to use an angular profile.
 

 
We dump the place for him.
 

 
Really judge.
 

 

 
We will arm the cap.
 

 
Somehow it came out.
 

 
LED profiles from below.
 
After making the channels on the trousers LED profiles, time to cut and trim them.
Their angular joints are not easy to do - the cut itself lasted a few seconds, measuring a few minutes.
 

 
At the end of the place insert a plug.
 

 


Short section of the second top.
 


Other electrics / electronics, box cable management.
 

 
Fast connection and test (if it works).
 

post edited by SKEEPER. - 2017/06/04 04:44:54
#97
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/04 02:51:57 (permalink)
Lovin' this work!

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



#98
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/04 04:01:03 (permalink)
Thank you very much.
 
Little bonus :)
 
SKEEPER & EVGA GARAGE :)
 

 

 

#99
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/11 00:28:42 (permalink)
Continuation.
 
This is the place where the desk will be mounted.
 

 
We make sure not to hit the wire.
 

 

 
By laser, we will assign elements.
 

 

 
We drill and screw.
 

 
We give black pads.
 

 
And the heads of the screws are covered with black hoods.
 

 
All supports on site.
 

 
Lower plate count and lighting test.
 

rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/11 00:44:41 (permalink)
This is looking really good

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/25 11:53:24 (permalink)
Thank you rjohnson11.
 
The whole position was enriched by the TV, which until then put on the desk (temporarily).
 
For interested - LG OLED 55EG910V.
 

 
Of course there will be a monitor, of course, so it was necessary to expand the entire entertainment corner and transfer the TV, so I bought some furniture, a TV handle and some accessories there.
 

rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/25 12:20:28 (permalink)
Looks like you have a lot of work ahead of you on this part of your project.

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



Cool GTX
EVGA Forum Moderator
  • Total Posts : 23979
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Folding for the Greater Good
  • Status: offline
  • Ribbons : 117
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/25 12:43:28 (permalink)
 using a room laser to get the wall mounts nice and level
 
keep the updates coming
 

RTX Project EVGA X99 FTWK-5930K@4.8GHz 2xEVGA2080Ti EVGA-1200P2  Nibbler EVGA X99 Classified-5960X@4.5GHz 3-GPU Water Loop 1600P2 
AIO Folding  X99 2x1080Ti FTW3 Hybrid, 1200P
Thank You for Your Support


SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/25 13:41:08 (permalink)
Thanks! :)
I thought I would do it all over, but unfortunately it is not.
Fortunately 70% of the work is already done.
The desk itself is so presentable.
 

 

 

 

 

 

 

 
 
 
 
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/28 09:26:55 (permalink)
The TV is already in place.

rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/06/28 11:21:52 (permalink)
Looks great. Well done.

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/07/13 13:51:05 (permalink)
Thank you rjohnson11.
It's nice on your part.
My entertainment corner is almost ready.
In September I go to Berlin for one of the biggest consumer electronics trade fairs - IFA Berlin.
I take with me an earlier benchtable project and a new one which will be built on the following parts.
In this project I would like to show that on the factory parts you can build a very nice and efficient computer. Sufficient modifications are enough to make an interesting project.
Housing DG-87 - is amazing, large and has a lot of possibilities - something fantastic. EVGA is known for its high quality products and I can honestly open it up.
Here they are, beautiful in its form .:
 

 

 

 

 

SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/07/13 14:05:46 (permalink)

 

 

 

 

 

 

 

jaykenning
New Member
  • Total Posts : 62
  • Reward points : 0
  • Joined: 2011/07/27 11:33:17
  • Status: offline
  • Ribbons : 0
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/07/14 12:01:00 (permalink)
holy crap thats clean as hell
SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/09/21 11:58:06 (permalink)
I refresh the topic.
 
IFA Berlin is already behind us. Until then, I had to put the computers together and lack the time to publish the material.
There are already pictures of ready-made screenshots - here we will develop some.
 
So let's continue the EVGA DG-87 setup.
The housing, graphics card and motherboard was presented, so now AiO.
The processor will cool the EVGA CLC-280
 

 


 

 

 

 


 
 The unit will power the previously presented EVGA SuperNOVA G3 1000W.

rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/09/21 13:09:57 (permalink)
Excellent, glad to see you back on this project.

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/09/24 10:05:32 (permalink)
rjohnson, thank you for the warm welcome.
 
This project and Aorus was released on the launch of the new M.2 / PCI SSDs and Goodram's RAM memory of 3000MHz.
For the EVGA flew DDR4 3000MHz 64GB (8x8) frame - brushed aluminum.
 

 

 

 
Two 240GB SSD M.2 drives - one in M.2, one in PCI
 

 
Two 480GB SATA SSDs
 

 
The last thing is the cables - the full set was made by my colleague Patryk - MisterT.Design (I have no patience for them).
 

post edited by SKEEPER. - 2017/09/24 11:44:28
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/09/25 01:10:24 (permalink)
Excellent

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/09/25 12:36:07 (permalink)
Thank you.
 
Keeping a certain amount of chronology in the topic, it was time to present the entire computer.
Specification:
CASE - EVGA DG-87
MOBO - EVGA x99 FTW K
GPU - 2-way SLI EVGA GeForce 1080 FTW2 DT GAMING
SSD - 2 x GOODRAM IRIDIUM PRO 480 GB
SSD - GOODRAM IRDM ULTIMATE PCI-e 2280 240 GB
SSD - GOODRAM IRDM ULTIMATE M.2 2280 240GB
RAM - GOODRAM IRIDIUM DDR4 3000 MHz 64 GB (8 x 8)
PSU - EVGA SuperNOVA 1000 G3
CPU cooler: AiO EVGA CLC 280
ALPHACOOL LED PANEL - BIAŁY

 

 

 

 

 

 

 

 

 

 

 

 

 

DeathAngel74
FTW Member
  • Total Posts : 1260
  • Reward points : 0
  • Joined: 2015/03/04 22:16:53
  • Location: With the evil monkey in your closet!!
  • Status: offline
  • Ribbons : 10
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/09/25 13:56:46 (permalink)
Awesome. Nice to see it completed. I really the brushed aluminum DRAM.

Carnage specs:
Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/09/26 03:47:58 (permalink)
Absolutely awesome. I wish I had your skills. 

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



cabofreak
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2016/08/22 16:14:35
  • Status: offline
  • Ribbons : 0
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/11/15 23:33:13 (permalink)
outstanding, your build log is gorgeous as well as the finished build, great job
rjohnson11
EVGA Forum Moderator
  • Total Posts : 79035
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Europe
  • Status: offline
  • Ribbons : 71
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/11/16 05:17:17 (permalink)
cabofreak
outstanding, your build log is gorgeous as well as the finished build, great job


Yes he has really great skills

Specs: AMD Ryzen 9 3950X,  Corsair MP600 M.2, 64GB Corsair RGB Dominator,  ASUS Crosshair VIII Hero,  Corsair 1000D, EVGA RTX 2070 FTW 3

Associate Code: H5U80QBH6BH0AXF



SKEEPER.
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2017/02/05 10:57:52
  • Status: offline
  • Ribbons : 4
Re: SKEEPER - Presentation stands for reservoirs [GearUpwithEVGA] 2017/11/16 13:52:51 (permalink)
I feel intimidated :)
Thank you so much for such positive comments.
The approval of others is a motivation for further development - thank you again.
 


The project was prepared for IFA Berlin.
As far as I know, IFA Berlin is Europe's largest consumer electronics trade fair, and the second in the world.
I had the pleasure of spending a day at the fair, and believe me, that the area of the fair is huge - a minimum of three days to explore everything.
I have about 560km to Berlin, but it was worth it.

Goodram introduces new M.2 SSDs and 3000MHz memory.
EVGA is obviously equipped with all this.

We have introduced this year's products, high quality and very good parameters.

Below are some photos from the fair and a short video (more on the web).
 

 

 

 

 
...and video.
 
https://www.youtube.com/watch?v=gGI7lLgAeEo
Page: < 12345.. > >> Showing page 4 of 6
Jump to:
  • Back to Mobile