EVGA

AnsweredRTX 3090 Kingpin Hydrocopper

Page: << < ..3132333435.. > >> Showing page 31 of 36
Author
nardox
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2009/05/23 08:47:37
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 14:16:41 (permalink)
I'm just gonna say screw LTT, it's basically for his followers and again not fair to the public consumers. He's only maybe the good guy for his followers and just another entity competing for GPU resources for everyone else
xxplatoontekkxx
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2019/04/07 09:20:26
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 14:17:49 (permalink)
Nvm. Hope everyone gets a card ASAP.
post edited by xxplatoontekkxx - 2021/05/06 14:20:58

instagram: xxplatoontekkxx

#SWOUP
spezjr95
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2020/12/02 11:59:40
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 14:49:53 (permalink)
Clovis559
 
That is all correct. To RMA you can replace water block, etc, but to send it back in it needs to be in the state you received it originally. If you drill through or modify anything physically you're tossing out your warranty. You would have to get the Hybrid kit from someone willing to part with it. Personally I would not, as I would be loosing my warranty. They don't sell the Hybrid Kit for a Kingpin separately. The ones they do sell, won't fit.
 
People will get mad at everyone right now, it's best not to respond to them. I feel for them, but it's the times we live in. People have been upset on these forums for a while and I hope in time everyone gets a card.  This is also not the first time this has happened. 2080ti's were hard to get, there was a mining craze, etc. If you need a card you need a card, you don't need to justify yourself to everyone why you need it!
 
This que looks short, which makes it even more promising for those who got a time. For the AIO Kingpin it was the same, and soon after they finished the que (About 3 weeks), they opened up a much larger, longer que. You shouldn't have temp problems unless you live on the sun or Arizona.
 



Thank you for the info! And it's fine, it didn't really bother me that much. I was actually entirely unaware the card wasn't just a fancier AIO when I got in queue, so I honestly owe the guy who chastised me for making me aware of it.
 
Assuming I can get it, it sounds like I'd be better off just trading it on here for a 3070 or a 3080, or even a KP Hybrid if someone's willing to part with theirs. The idea of putting together a custom water loop scares me a bit.
kissTheApex
SSC Member
  • Total Posts : 624
  • Reward points : 0
  • Joined: 2021/02/22 15:30:59
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 14:49:57 (permalink)
spezjr95
I was chastised in the auto-notify thread for getting in the KP HC queue when I don't have a system on which to run the card. Granted, I don't, though I don't feel particularly guilty as it's been a rough couple months running my computer on my old 1060. I have some questions for you all, and you can redirect me if this isn't the proper forum for this sort of discussion.
Assuming there's enough stock anytime soon to actually move the queue ahead 2 more seconds, and assuming I can get ahold of a hybrid kit and a bigger PSU, would I be able to replace the water block? It would probably be cheaper and less hassle than a custom loop, wouldn't it? And if I have heat issues, I can just underclock the damn thing, though I'm guessing it'll be bottlenecked well below full load temps until my CPU is due for an upgrade.
And finally, I've heard for warranty purposes that I couldn't part with the water block, as I would need to send it with the card for any RMAs in the future. Is that right?

Might be cheaper, but I’m not sure on the “less hassle” part. Needless to say, I don’t think you could achieve the cooling performance of the HC with the AIO. Just get a combination compact pump/reservoir and set a GPU only loop. I guarantee you will be happier in the long run.
oldmanian
iCX Member
  • Total Posts : 263
  • Reward points : 0
  • Joined: 2017/01/31 10:22:46
  • Status: offline
  • Ribbons : 1
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 14:52:49 (permalink)
Duplicate deleted
post edited by oldmanian - 2021/05/06 14:58:58
oldmanian
iCX Member
  • Total Posts : 263
  • Reward points : 0
  • Joined: 2017/01/31 10:22:46
  • Status: offline
  • Ribbons : 1
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 14:52:53 (permalink)
Wait wt happened? The kingpin hydrocoppers already sold out and there is no question option? Apologize for not checking the boards for a few days. It this is a pretty crappy consequence. Are. They just going to do these in batches?
post edited by oldmanian - 2021/05/06 14:58:15
Clovis559
SSC Member
  • Total Posts : 563
  • Reward points : 0
  • Joined: 2020/09/18 13:53:08
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 15:03:31 (permalink)
spezjr95
Clovis559
 
That is all correct. To RMA you can replace water block, etc, but to send it back in it needs to be in the state you received it originally. If you drill through or modify anything physically you're tossing out your warranty. You would have to get the Hybrid kit from someone willing to part with it. Personally I would not, as I would be loosing my warranty. They don't sell the Hybrid Kit for a Kingpin separately. The ones they do sell, won't fit.
 
People will get mad at everyone right now, it's best not to respond to them. I feel for them, but it's the times we live in. People have been upset on these forums for a while and I hope in time everyone gets a card.  This is also not the first time this has happened. 2080ti's were hard to get, there was a mining craze, etc. If you need a card you need a card, you don't need to justify yourself to everyone why you need it!
 
This que looks short, which makes it even more promising for those who got a time. For the AIO Kingpin it was the same, and soon after they finished the que (About 3 weeks), they opened up a much larger, longer que. You shouldn't have temp problems unless you live on the sun or Arizona.
 



Thank you for the info! And it's fine, it didn't really bother me that much. I was actually entirely unaware the card wasn't just a fancier AIO when I got in queue, so I honestly owe the guy who chastised me for making me aware of it.
 
Assuming I can get it, it sounds like I'd be better off just trading it on here for a 3070 or a 3080, or even a KP Hybrid if someone's willing to part with theirs. The idea of putting together a custom water loop scares me a bit.




There are legit people here with a Kingpin AIO, who will trade you for a Kingpin Hydro Copper. You end up on the short end of that stick, but not by much and in reality you come out because you'll get a card that you want.
 
I had fears of water cooling for a long time, and I recently have built my first loop, now I'm addicted to it like crack h20 cooling. This could be the push you need to start your first loop. Maybe your an Overclocker and just don't know it!
 
oldmanian
Wait wt happened? The kingpin hydrocoppers already sold out and there is no question option? Apologize for not checking the boards for a few days. It this is a pretty crappy consequence. Are. They just going to do these in batches?

 
They went out fast. But that could be good news. The first round of Kingpins went out fast also. They went through the first ques quickly. Then they opened up a larger second que. I would keep an eye posted. This was given a heads up by Jacob for this week, and they did post on twitter on TeamEVGA and Jacobs the Que would be open today. (Don't quote me on these dates, but the first Que was like Nov 22, and the second que was started on like Dec 16th.)
post edited by Clovis559 - 2021/05/06 15:06:48
xThomasTv
New Member
  • Total Posts : 37
  • Reward points : 0
  • Joined: 2017/06/11 06:04:07
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 15:36:07 (permalink)
I signed up for it but never got an email confirmation nor I see a notify on "my notifies" anyone having the same issue ?
iamjanco
Superclocked Member
  • Total Posts : 184
  • Reward points : 0
  • Joined: 2017/03/23 21:45:12
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 16:31:33 (permalink)
I was one of those who got to the notify button early, but it didn't help. oh well, i'll just wait on the hc block (i'm on that list), or pick up an optimus if it's available sooner (if it does indeed appear).
 
yes, i do have a copy of the aio version.
post edited by iamjanco - 2021/05/06 16:34:34

While you can beat a dead horse as much as you like,
you might have a tough time arguing with one.
nardox
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2009/05/23 08:47:37
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 16:33:36 (permalink)
xThomasTv
I signed up for it but never got an email confirmation nor I see a notify on "my notifies" anyone having the same issue ?


a couple dozens here at least, it's a SOL situation and it won't be fixed
Nacman
Superclocked Member
  • Total Posts : 154
  • Reward points : 0
  • Joined: 2015/05/11 20:17:25
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 17:14:42 (permalink)
I am currently 5th,6th or 7th on this self report queue as two others have the same timestamp as I do. I assume EVGA must have a system to determine who comes first in tie situations?  Maybe milliseconds from server log??? Anyone know?


lifeisshort117
New Member
  • Total Posts : 82
  • Reward points : 0
  • Joined: 2008/10/31 04:46:54
  • Status: offline
  • Ribbons : 1
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 18:37:26 (permalink)
iamjanco
Anyone feel the need to start a new thread for just the KPE 3090 HC block queue? It's getting hard to track movement for just the block.



Yup. This thread turned for the worse after the card drop today.
Fayalite
iCX Member
  • Total Posts : 253
  • Reward points : 0
  • Joined: 2021/01/08 18:38:42
  • Location: Bellevue, WA
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/06 22:50:18 (permalink)
Nacman
I am currently 5th,6th or 7th on this self report queue as two others have the same timestamp as I do. I assume EVGA must have a system to determine who comes first in tie situations?  Maybe milliseconds from server log??? Anyone know?


Well I believe it's simpler. If they have a SQL database, not even timestamp, just the unique ID with auto increment on the table.

Mr. Fox
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2012/03/24 12:50:21
  • Location: AZ - America's Blast Furnace
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 01:01:31 (permalink)
I received my  Hydro Copper and got it installed. Pretty simple and painless. I can already tell the vRAM is cooler and I haven't even run any tests yet. 
 
Question: Are others finding the only lighting is the K|NGP|N logo on top by the water ports? I do not see any other lighting. I updated Precision X1 and tried LED Sync and it looks like that is all there is. Is this correct?
 



Wraith // EVGA Z690 Dark K|NGP|N | 13900K | MSI 4090 Suprim X | 32GB DDR5 | EVGA SuperNOVA 1600 P2 | HC-500A Chiller | MO-RA3 360 D5*3 || EVGA DG-86
Banshee // ASUS Z690 Apex | 13900KF | ASROCK 6900 XT OC Formula | 32GB DDR5 | Corsair RM1200x SHIFT | XT45 1080 Nova D5*2 || Corsair 5000D Airflow
Half-Breed // Precision 17 7720 | 7920HQ (BGA filth) | Quadro P5000 16GB (MXM) | 32GB DDR4 || Grade A Off-Lease Refurb

 
Gotspeed_2000
SSC Member
  • Total Posts : 818
  • Reward points : 0
  • Joined: 2021/01/07 18:53:17
  • Status: offline
  • Ribbons : 5
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 01:08:17 (permalink)
You are the first one.  Nice setup.  I'm sure others will post once they get theirs.  Congrats on getting the card.  

Corsair 1000D Obsidian Case
I9 13900K with EK Velocity 2 Block
ASUS 4090 Strix with Optimus Block
ASUS Hero Z690 Mobo
64GB DDR5 RAM Trident 6000Mhz 
1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive
EVGA 1600 Watt PSU
30 Lian Li AL120 fans
2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with
Two EK Pump/res combos.  Custom hard tube loop.  
Samsung G7 32" Monitor
EVGA Z20 Keyboard
Glorious Model O
Mr. Fox
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2012/03/24 12:50:21
  • Location: AZ - America's Blast Furnace
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 01:15:51 (permalink)
Gotspeed_2000
You are the first one.  Nice setup.  I'm sure others will post once they get theirs.  Congrats on getting the card.  



Thank you. I actually already had the GPU since December, but just received and installed the Hydro Copper block.


Wraith // EVGA Z690 Dark K|NGP|N | 13900K | MSI 4090 Suprim X | 32GB DDR5 | EVGA SuperNOVA 1600 P2 | HC-500A Chiller | MO-RA3 360 D5*3 || EVGA DG-86
Banshee // ASUS Z690 Apex | 13900KF | ASROCK 6900 XT OC Formula | 32GB DDR5 | Corsair RM1200x SHIFT | XT45 1080 Nova D5*2 || Corsair 5000D Airflow
Half-Breed // Precision 17 7720 | 7920HQ (BGA filth) | Quadro P5000 16GB (MXM) | 32GB DDR4 || Grade A Off-Lease Refurb

 
Nacman
Superclocked Member
  • Total Posts : 154
  • Reward points : 0
  • Joined: 2015/05/11 20:17:25
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 04:40:38 (permalink)
Fayalite
Nacman
I am currently 5th,6th or 7th on this self report queue as two others have the same timestamp as I do. I assume EVGA must have a system to determine who comes first in tie situations?  Maybe milliseconds from server log??? Anyone know?


Well I believe it's simpler. If they have a SQL database, not even timestamp, just the unique ID with auto increment on the table.


Doh! Makes complete sense


pclausen
Superclocked Member
  • Total Posts : 197
  • Reward points : 0
  • Joined: 2017/07/22 20:02:38
  • Status: offline
  • Ribbons : 1
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 04:45:47 (permalink)
Mr. Fox
Question: Are others finding the only lighting is the K|NGP|N logo on top by the water ports? I do not see any other lighting. I updated Precision X1 and tried LED Sync and it looks like that is all there is. Is this correct?



That is correct.  Only the FTW3 HC's have the LEDs across the block.
Hoggle
EVGA Forum Moderator
  • Total Posts : 10105
  • Reward points : 0
  • Joined: 2003/10/13 22:10:45
  • Location: Eugene, OR
  • Status: offline
  • Ribbons : 4
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 04:46:33 (permalink)
It did sell out faster then I expected. Being a higher priced extreme card I thought it might take a bit to sell out but really right now getting a 3080 from retailers is about double the price so the Kingpin doesn’t look that bad.

Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
 
 
Mr. Fox
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2012/03/24 12:50:21
  • Location: AZ - America's Blast Furnace
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 05:04:15 (permalink)
pclausen
Mr. Fox
Question: Are others finding the only lighting is the K|NGP|N logo on top by the water ports? I do not see any other lighting. I updated Precision X1 and tried LED Sync and it looks like that is all there is. Is this correct?

That is correct.  Only the FTW3 HC's have the LEDs across the block.

Thank you for responding. Well, shoot. That is a real pisser. I only care about white, but to have no lighting whatsoever truly sucks. I don't know what the people that designed it were thinking, but charging $300 for a waterblock with no lighting is messed up. I guess I will be hoping for an OptimusPC block and selling this as soon as I can get one. Super disappointing that they pulled this silly stunt. It makes me regret having purchased it now.
 
The vRAM temps are amazing compared to what they were before, but now I am too angry to enjoy that. I think I am going to complain about it to customer service. It would be normal and reasonable to expect it, and consistent with historical precedent. They should include disclaimers or at least mention the absence of any lighting features in their marketing material. 
 
 

post edited by Mr. Fox - 2021/05/07 05:20:15

Wraith // EVGA Z690 Dark K|NGP|N | 13900K | MSI 4090 Suprim X | 32GB DDR5 | EVGA SuperNOVA 1600 P2 | HC-500A Chiller | MO-RA3 360 D5*3 || EVGA DG-86
Banshee // ASUS Z690 Apex | 13900KF | ASROCK 6900 XT OC Formula | 32GB DDR5 | Corsair RM1200x SHIFT | XT45 1080 Nova D5*2 || Corsair 5000D Airflow
Half-Breed // Precision 17 7720 | 7920HQ (BGA filth) | Quadro P5000 16GB (MXM) | 32GB DDR4 || Grade A Off-Lease Refurb

 
iedoc
New Member
  • Total Posts : 21
  • Reward points : 0
  • Joined: 2016/05/22 06:45:28
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 05:20:43 (permalink)
Mr. Fox
pclausen
Mr. Fox
Question: Are others finding the only lighting is the K|NGP|N logo on top by the water ports? I do not see any other lighting. I updated Precision X1 and tried LED Sync and it looks like that is all there is. Is this correct?

That is correct.  Only the FTW3 HC's have the LEDs across the block.

Thank you for responding. Well, shoot. That is a real pisser. I only care about white, but to have no lighting whatsoever truly sucks. I don't know what the people that designed it were thinking, but charging $300 for a waterblock with no lighting is messed up. I guess I will be hoping for an OptimusPC block and selling this as soon as I can get one. Super disappointing that they pulled this silly stunt. It makes me regret having purchased it now.
 
 




That's actually funny, because i specifically loved the very little lighting this card had. I don't like a ton of lighting on my pc, lighting kind of makes things look cheap or messy in my opinion, at least if there's too many colors or too much lighting. I usually always turn off all the leds i can on my gpus
bmx045
New Member
  • Total Posts : 84
  • Reward points : 0
  • Joined: 2016/08/19 11:49:59
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 06:00:21 (permalink)
Mr. Fox
pclausen
Mr. Fox
Question: Are others finding the only lighting is the K|NGP|N logo on top by the water ports? I do not see any other lighting. I updated Precision X1 and tried LED Sync and it looks like that is all there is. Is this correct?

That is correct.  Only the FTW3 HC's have the LEDs across the block.

Thank you for responding. Well, shoot. That is a real pisser. I only care about white, but to have no lighting whatsoever truly sucks. I don't know what the people that designed it were thinking, but charging $300 for a waterblock with no lighting is messed up. I guess I will be hoping for an OptimusPC block and selling this as soon as I can get one. Super disappointing that they pulled this silly stunt. It makes me regret having purchased it now.
 
The vRAM temps are amazing compared to what they were before, but now I am too angry to enjoy that. I think I am going to complain about it to customer service. It would be normal and reasonable to expect it, and consistent with historical precedent. They should include disclaimers or at least mention the absence of any lighting features in their marketing material. 
 
 
 




I think you're not going to be alone in this

 
 
anilktv
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2020/11/25 04:12:32
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 06:07:20 (permalink)
does anyone know the thermal pad thickness for the hydrocopper kingpin. both the front side and the backplate.please and thank you.
Mr. Fox
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2012/03/24 12:50:21
  • Location: AZ - America's Blast Furnace
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 06:17:22 (permalink)
iedoc
Mr. Fox
pclausen
Mr. Fox
Question: Are others finding the only lighting is the K|NGP|N logo on top by the water ports? I do not see any other lighting. I updated Precision X1 and tried LED Sync and it looks like that is all there is. Is this correct?

That is correct.  Only the FTW3 HC's have the LEDs across the block.

Thank you for responding. Well, shoot. That is a real pisser. I only care about white, but to have no lighting whatsoever truly sucks. I don't know what the people that designed it were thinking, but charging $300 for a waterblock with no lighting is messed up. I guess I will be hoping for an OptimusPC block and selling this as soon as I can get one. Super disappointing that they pulled this silly stunt. It makes me regret having purchased it now.

That's actually funny, because i specifically loved the very little lighting this card had. I don't like a ton of lighting on my pc, lighting kind of makes things look cheap or messy in my opinion, at least if there's too many colors or too much lighting. I usually always turn off all the leds i can on my gpus
As I mentioned, I only care about white. I am not an RGB fan. I like having the lighting in an otherwise dark room. And, I like having the option to choose. But, it is the underlying issue of a flagship product being incomplete and missing a feature that has been taken for granted as standard fare that bothers me most. They could have even put a spin on it as an excuse and called it a "Hydro Copper Dark" but finding out as a surprise because they conveniently failed to make mention of it is kind of raunchy and not very customer-centric. It just feels really half-assed. I had to ask because I thought my $300 GPU block had something wrong with it. That is pretty messed up, LoL.
post edited by Mr. Fox - 2021/05/07 06:28:38

Wraith // EVGA Z690 Dark K|NGP|N | 13900K | MSI 4090 Suprim X | 32GB DDR5 | EVGA SuperNOVA 1600 P2 | HC-500A Chiller | MO-RA3 360 D5*3 || EVGA DG-86
Banshee // ASUS Z690 Apex | 13900KF | ASROCK 6900 XT OC Formula | 32GB DDR5 | Corsair RM1200x SHIFT | XT45 1080 Nova D5*2 || Corsair 5000D Airflow
Half-Breed // Precision 17 7720 | 7920HQ (BGA filth) | Quadro P5000 16GB (MXM) | 32GB DDR4 || Grade A Off-Lease Refurb

 
alexaqui
New Member
  • Total Posts : 83
  • Reward points : 0
  • Joined: 2017/06/10 11:30:18
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 06:28:48 (permalink)
Mr. Fox
As I mentioned, I only care about white. I am not an RGB fan. I like having the lighting in an otherwise dark room. And, I like having the option to choose. But, it is the underlying issue of a flagship product being incomplete and missing a feature that has been taken for granted as standard fare that bothers me most. They could have even put a spin on it as an excuse and called it a "Hydro Copper Dark" but finding out as a surprise because they conveniently failed to make mention of it is kind of raunchy and not very customer-centric. It just feels really half-assed.



Unfortunately this seems to be the new normal in this environment of scarcity in all aspects of basic life. Companies are profit driven and they don't care.  They want to get product to market as fast as possible and don't care anymore because there are wait lists for everything and if you don't like the block, there are tons and tons of people who don't care.  They just want to *consume*.  It's craziness!
 
I will remember the companies that treated their customers well and those who didn't.  I have a KPE and I'm on my second one - I'm not a fan of the garbage pump, the whine, the noise, etc. except what choice do I have?  I'm on the HC block upgrade list and can only hope.  I missed the queue here by a little bit for the hydro. Ugh...  Not happy how this is going down except what choice do I have?  Everything else is worse (e.g., Newegg, BB, AMD) at this point.
ShawnB420
iCX Member
  • Total Posts : 401
  • Reward points : 0
  • Joined: 2015/06/15 21:34:37
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 06:30:06 (permalink)
If anyone wants to trade a AIO KPE for a Hydrocopper shoot me a PM. I’d jump all over that.
Mr. Fox
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2012/03/24 12:50:21
  • Location: AZ - America's Blast Furnace
  • Status: offline
  • Ribbons : 3
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 06:39:22 (permalink)
alexaqui
Mr. Fox
As I mentioned, I only care about white. I am not an RGB fan. I like having the lighting in an otherwise dark room. And, I like having the option to choose. But, it is the underlying issue of a flagship product being incomplete and missing a feature that has been taken for granted as standard fare that bothers me most. They could have even put a spin on it as an excuse and called it a "Hydro Copper Dark" but finding out as a surprise because they conveniently failed to make mention of it is kind of raunchy and not very customer-centric. It just feels really half-assed.

Unfortunately this seems to be the new normal in this environment of scarcity in all aspects of basic life. Companies are profit driven and they don't care.  They want to get product to market as fast as possible and don't care anymore because there are wait lists for everything and if you don't like the block, there are tons and tons of people who don't care.  They just want to *consume*.  It's craziness!

I will remember the companies that treated their customers well and those who didn't.  I have a KPE and I'm on my second one - I'm not a fan of the garbage pump, the whine, the noise, etc. except what choice do I have?  I'm on the HC block upgrade list and can only hope.  I missed the queue here by a little bit for the hydro. Ugh...  Not happy how this is going down except what choice do I have?  Everything else is worse (e.g., Newegg, BB, AMD) at this point.
I agree. It is sad that we have been reduced to using everything else is worse as a measurement for an industry-leading product offering. Using the "better than a poke in the eye with a sharp stick" as the standard that defines owning a flagship product shows how messed up things really are.
bmx045 
I think you're not going to be alone in this
I am also pretty confident about that. There are lots of people that like RGB and lots that do not. There are lots of people that want the option whether they use it or not. I'd be happy to just have white LEDs, but having nothing is going to rub a lot of people the wrong way. I'd rather have nothing than being stuck with a rainbow puke theme though.

post edited by Mr. Fox - 2021/05/07 07:28:12

Wraith // EVGA Z690 Dark K|NGP|N | 13900K | MSI 4090 Suprim X | 32GB DDR5 | EVGA SuperNOVA 1600 P2 | HC-500A Chiller | MO-RA3 360 D5*3 || EVGA DG-86
Banshee // ASUS Z690 Apex | 13900KF | ASROCK 6900 XT OC Formula | 32GB DDR5 | Corsair RM1200x SHIFT | XT45 1080 Nova D5*2 || Corsair 5000D Airflow
Half-Breed // Precision 17 7720 | 7920HQ (BGA filth) | Quadro P5000 16GB (MXM) | 32GB DDR4 || Grade A Off-Lease Refurb

 
anilktv
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2020/11/25 04:12:32
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 08:16:08 (permalink)
is it 2mm thickness at the back 
 
Ilikeguitars
Superclocked Member
  • Total Posts : 104
  • Reward points : 0
  • Joined: 2021/05/03 20:18:50
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 08:17:43 (permalink)
the price on that bad boy makes my wallet hurt. wish i could get into water cooling but im too much of a chicken
anilktv
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2020/11/25 04:12:32
  • Status: offline
  • Ribbons : 0
Re: RTX 3090 Kingpin Hydrocopper 2021/05/07 08:24:57 (permalink)
custom loop is nice if u dont mind to get wet at times lol
 
Page: << < ..3132333435.. > >> Showing page 31 of 36
Jump to:
  • Back to Mobile