EVGA

Hot!Precision X1 Will Not Open

Page: < 12345 > Showing page 2 of 5
Author
Steveklo
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2018/10/01 18:23:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/10 12:47:50 (permalink)
Just tried dl and running 0.3.10 and it still isn't working for me running Windows 7 64 bit.
#31
Nicknapoli
New Member
  • Total Posts : 48
  • Reward points : 0
  • Joined: 2018/09/05 09:02:58
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/11 12:38:10 (permalink)
hi same issue with me aswell, installed the last version on my windows 10 pro with the last update the program is installed but don't work
#32
andrzejtnt2000
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2012/06/01 21:11:47
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/11 20:38:35 (permalink)
I've been having same issue with Win 7 x64 since October and tried every version of Precision x1 all Instructions but no success on 2080 Ti XC Ultra, and FTW3 and after all this time finally I got a response from EVGA. also Contacted NVidia for other issue on missing drivers for Hardware USB-C Drivers and some PCI device.
 
MB: Asus P9X79 WS CPU: Intel Core i7-3930K
the Video card is missing Drivers
PCI DEVICE:                                          PCI\VEN_10DE&DEV_1AD7&SUBSYS_24873842&REV_A1
Universal Serial Bus (USB) Controller: PCI\VEN_10DE&DEV_1AD6&SUBSYS_24873842&REV_A1
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
 
Also have experienced Boot with no VIDEO on the FTW3, even though windows would load. A power cycle would Fix it.
 
EVGA Rep:  


Hello,
This is Ray customer service supervisor for EVGA. We received your feedback about the issues you are having with Precision X1. The issue that you are having has to do with support in Windows 7. That software does not support Windows 7 and it is unlikely that it ever will. The software is made with Windows 10 in mind as the RTX ray-tracing features require DX12 (only supported in Windows 10) to work correctly.
We expect you to have the errors that you are having when using that operating system. That said, the card can be used with Nvidia’s Win 7 drivers and the card will work as expected, but PX1 will not.
Please feel free to reach out to me.
 
Regards, Ray
 
Very Disappointing as Precision X1 is not working on Win 7 x64 and may never will.
#33
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2972
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 24
Re: Precision X1 Will Not Open 2018/12/12 02:48:04 (permalink)
Steveklo
Just tried dl and running 0.3.10 and it still isn't working for me running Windows 7 64 bit.




This is getting ridiculous, i've practically told EVGA Developers how to rectify this.
 
It's an absolute (removed) lie that it was developed for 10 as the Assembly that it is failing on was provided to 8.0, its a simple fix i could do it i under 5 minutes myself.
 
EVGA, your developers are LIARS.
 
Guys, i will make a fix for this over the next week or so, if the evga half rate hacks aren't going to make a simple non-consequential change to the base aero assembly in use, i'll just provide you a way to install the one needed.
 
And done
Aero2 Assembly for .Net Presentation Frameworks on Windows 7
 
setup is unsigned, files installed are all microsoft signed.



 
edit by Cool GTX - Language removed - EVGA Forums Terms of Use
post edited by Cool GTX - 2018/12/12 11:25:55

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
#34
boreman
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2018/11/07 19:27:56
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/12 04:15:13 (permalink)
Squall-Leonhart You rock! No solution has worked for me up until now.
This was the answer to months of frustration.
Thank you!
post edited by boreman - 2018/12/12 04:17:24
#35
bob16314
Omnipotent Enthusiast
  • Total Posts : 8005
  • Reward points : 0
  • Joined: 2008/11/07 22:33:22
  • Location: Planet of the Babes
  • Status: offline
  • Ribbons : 743
Re: Precision X1 Will Not Open 2018/12/12 05:10:48 (permalink)

* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.4GHz * 16GB G.SKILL Trident Z 4133MHz * Crucial MX500 M.2 1TB * 2x WD Caviar Black 500GB * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home/Win10 Pro * 
 
"Whatever it takes, as long as it works" - Me
 
 
 
#36
andrzejtnt2000
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2012/06/01 21:11:47
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/12 08:53:09 (permalink)
Sweet Squall-Leonhart Your a Rock Star! 
 
finally got Precision X1 started for the First Time WOW 3 Months and fix released not by EVGA but Hurray its working.
 
No way EVGA a BIG DISAPOINTMENT from Support on this issue. 
 
PS: Now a days there aren't many well informed and knowledgeable techs, just change the part or go to different operating system, reinstall software is not a fix to a problem with software
#37
1john
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2017/03/04 15:11:58
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/12 10:39:36 (permalink)
Win 10 Pro here.
Just Installed new Win update, X1 is now working again.
Merry Christmas!
#38
Steveklo
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2018/10/01 18:23:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/15 10:20:18 (permalink)
Thank you Squall I finally got px1 to work with your solution. Awesome work just goes to show how lazy or misinformed EVGA is. 
#39
morph3us
New Member
  • Total Posts : 17
  • Reward points : 0
  • Joined: 2007/08/03 02:19:56
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/17 22:32:56 (permalink)
squall-leonhart
Steveklo
Just tried dl and running 0.3.10 and it still isn't working for me running Windows 7 64 bit.




This is getting ridiculous, i've practically told EVGA Developers how to rectify this.
 
It's an absolute (removed) lie that it was developed for 10 as the Assembly that it is failing on was provided to 8.0, its a simple fix i could do it i under 5 minutes myself.
 
EVGA, your developers are LIARS.
 
Guys, i will make a fix for this over the next week or so, if the evga half rate hacks aren't going to make a simple non-consequential change to the base aero assembly in use, i'll just provide you a way to install the one needed.
 
And done

 
setup is unsigned, files installed are all microsoft signed.



 
edit by Cool GTX - Language removed -




 
dude thank you so much. it hasn't worked for me for months , and this fixed it  (  ) . EVGA should give you some swag for such a concise write up and even fix. 
 
#40
bcavnaugh
The Crunchinator
  • Total Posts : 38608
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: Precision X1 Will Not Open 2018/12/18 11:03:47 (permalink)
squall-leonhart
Aero2 Assembly for .Net Presentation Frameworks on Windows 7

Can this be found on Microsoft's website?
 

Associate Code: 9E88QK5L7811G3H


 
#41
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2972
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 24
Re: Precision X1 Will Not Open 2018/12/18 18:44:29 (permalink)
No.
 
Though the files are included in the Dotnet install packages, it is configured not to install on nt6.1

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
#42
bcavnaugh
The Crunchinator
  • Total Posts : 38608
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: Precision X1 Will Not Open 2018/12/18 18:50:42 (permalink)
squall-leonhart
No.
Though the files are included in the Dotnet install packages, it is configured not to install on nt6.1

Thank you

Associate Code: 9E88QK5L7811G3H


 
#43
speedman2006
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2018/12/13 11:55:06
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2018/12/19 11:20:03 (permalink)
On WIndows 10 is stucked on blue color,cannot change anything.Reinstalled x1 2 times and stil same,failed firmware.
#44
bcavnaugh
The Crunchinator
  • Total Posts : 38608
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 276
Re: Precision X1 Will Not Open 2018/12/19 14:27:54 (permalink)
speedman2006
On WIndows 10 is stucked on blue color,cannot change anything.Reinstalled x1 2 times and stil same,failed firmware.


See https://forums.evga.com/FindPost/2899864

Associate Code: 9E88QK5L7811G3H


 
#45
SkaterFr3ak
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2018/12/14 14:29:18
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/04 16:23:57 (permalink)
Steveklo
I have the same problem with PX1 on Windows 7 64 bit, all I get when I run the program is a hourglass for one second then there is a message stating that the program stopped working and windows is sending a report to Microsoft for them to look at. I've tried all versions down to 0.2.5 and no of them are working on my system. I have a EVGA 2070 gaming GPU.


Same here i dont get anything just see it pop on up on task manager.
 
windows 7 64 i did the version back in late November i believe and just tried it with the new one yesterday
i7 3770
16 gb ram adata
rtx2070 xc ultra
os on ssd Samsung 840pro i believe
#46
SkaterFr3ak
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2018/12/14 14:29:18
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/04 16:31:37 (permalink)
holy ****
THank you
#47
fubar2niner
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2011/06/11 01:08:08
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 11:10:02 (permalink)
Just tried installing your Aero2 file and still no joy. This is on a clean win7 ultimate install. Weird thing is it did work, b4 I clean installed my OS this weekend. Any thoughts mate?
 
Best regards
 
Fubar
#48
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2972
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 24
Re: Precision X1 Will Not Open 2019/01/06 11:11:03 (permalink)
You need the rest of the dotnet 4.7 package, 7 comes with 3.0 by default only.

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
#49
fubar2niner
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2011/06/11 01:08:08
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 11:11:06 (permalink)
squall-leonhart
Steveklo
Just tried dl and running 0.3.10 and it still isn't working for me running Windows 7 64 bit.




This is getting ridiculous, i've practically told EVGA Developers how to rectify this.
 
It's an absolute (removed) lie that it was developed for 10 as the Assembly that it is failing on was provided to 8.0, its a simple fix i could do it i under 5 minutes myself.
 
EVGA, your developers are LIARS.
 
Guys, i will make a fix for this over the next week or so, if the evga half rate hacks aren't going to make a simple non-consequential change to the base aero assembly in use, i'll just provide you a way to install the one needed.
 
And done

 
setup is unsigned, files installed are all microsoft signed.



 
edit by Cool GTX - Language removed -




Just tried installing your Aero2 file and still no joy. This is on a clean win7 ultimate install. Weird thing is it did work, b4 I clean installed my OS this weekend. Any thoughts mate?
 
Best regards
 
Fubar
 
#50
fubar2niner
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2011/06/11 01:08:08
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 11:13:41 (permalink)
4.7...4.7.1 or 4.7.2?
Regards
 
Fubar
 
No worries it works now. Many thanks mate!
 
 
post edited by fubar2niner - 2019/01/06 11:18:46
#51
Ravendarat
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2018/12/25 12:26:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 21:49:11 (permalink)
Im also having this issue. How is it we pay this much for a GPU and they cant make a stable version of the software that works on the most popular current OS out there. Its so frustrating, if I had another route to go I would and I can tell you right now that I am looking at doing a new build and this experience is having me look elsewhere for my components, I don't need this kinda frustration following me to a motherboard or other such hardware.
#52
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2972
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 24
Re: Precision X1 Will Not Open 2019/01/06 22:08:00 (permalink)
Ravendarat
Im also having this issue. How is it we pay this much for a GPU and they cant make a stable version of the software that works on the most popular current OS out there. Its so frustrating, if I had another route to go I would and I can tell you right now that I am looking at doing a new build and this experience is having me look elsewhere for my components, I don't need this kinda frustration following me to a motherboard or other such hardware.




what OS?

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
#53
Ravendarat
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2018/12/25 12:26:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 22:11:21 (permalink)
Windows 10 Home 64bit 
#54
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2972
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 24
Re: Precision X1 Will Not Open 2019/01/06 22:18:48 (permalink)
theres a set of installation steps required for Windows 10.

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
#55
Ravendarat
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2018/12/25 12:26:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 22:24:19 (permalink)
Where would I find that? 
#56
squall-leonhart
CLASSIFIED Member
  • Total Posts : 2972
  • Reward points : 0
  • Joined: 2009/07/27 19:57:03
  • Location: Australia
  • Status: offline
  • Ribbons : 24
Re: Precision X1 Will Not Open 2019/01/06 22:29:16 (permalink)

CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
#57
Ravendarat
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2018/12/25 12:26:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 22:40:10 (permalink)
Unfortunately that also did not solve the problem, I appreciate you trying to help though, just so frustrated with a  companies software developed to work with their product not being able to be even opened, and its not like Im trying to use it in an odd fashion, simply using the installer they wrote, on a platform its supposed to be designed to work with, I hate to sound like Im ****ing but this is something that shouldn't involve anymore effort to make work than simply running the installer. Ive had the card 3 weeks now and still cant even make the "supported" software open
#58
Ravendarat
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2018/12/25 12:26:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 22:42:43 (permalink)
Also for what its worth both that fix you linked to and the one above both link to WIN 7 fixes, not 10, although I followed the instructions in the link anyways to check the WinRing0_1_2_0 folder
#59
Ravendarat
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2018/12/25 12:26:05
  • Status: offline
  • Ribbons : 0
Re: Precision X1 Will Not Open 2019/01/06 23:11:50 (permalink)
GOT IT, Im running a Alienware Laptop and then using the Alienware Graphics Amp with an upgrade PSU to run the 2080 TI, I had to go into device manager and actually disable the integrated 1070 card so the system ONLY sees the 2080 Ti, fired right up after I did that.
#60
Page: < 12345 > Showing page 2 of 5
Jump to:
  • Back to Mobile