Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 18:40:15
(permalink)
|
EVGA1225
New Member
- Total Posts : 35
- Reward points : 0
- Joined: 2020/12/07 12:05:44
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 18:40:26
(permalink)
So is it better to oc with MSI Afterburner than X1?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 18:43:41
(permalink)
EVGA1225
So is it better to oc with MSI Afterburner than X1?
I prefer msi afterburner.
|
chicagohawk
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2009/03/23 22:48:13
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 19:20:15
(permalink)
Sajin
https://www.3dmark.com/3dm/55171405
You guys like my new score. Dem clocks. LOL.
Do you know what causes that? Forgive my lack of knowledge here, but I initially thought higher clocks = higher scores. But as you can see in the link below, my best run was on one of my worst average clocks. Does it have to do with values we don't see related to RT cores? https://www.3dmark.com/pr/626724 How'd you get to those clocks anyway when yours is clocking closer to mine normally?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 19:28:34
(permalink)
Yes. I know what causes it. Editing the voltage/frequency curve caused it to do that.
|
devinishome
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2020/11/15 01:39:56
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 19:42:58
(permalink)
520w from techpowerup worked better?
|
USMC1419
Superclocked Member
- Total Posts : 179
- Reward points : 0
- Joined: 2008/11/05 14:36:05
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 19:48:55
(permalink)
devinishome
520w from techpowerup worked better?
From what I understand, johnksss's card had the same bios on all 3 switch position, so he took the LN2 520w bios that should already be on the card and flashed it. I'll be getting my KP monday. Eager to compare it to my FTW3 Hybrid.
12900k @ 5.2 W/Optimus Sig V2 64GB DDR5 @ 5000 RTX 3090 K|NGP|N W/ Optimus WB EVGA 1200w Supernova G2 Sammy 980 Pro 2Tb Predator 27" 1440p G-Sync IPS 165 hz Resident "wise guy"
|
flyingtoaster85
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2016/12/10 22:24:59
- Location: Los Angeles
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 19:48:56
(permalink)
https://www.3dmark.com/pr/662518
15632
Main: 10700k @ 5.4ghz, 3090 K|NGP|N Hydrocopper, 4x8 @4300 16-16-16-36, EVGA 1200 P2, MSI Z490 Unify, 5 radiators, 2 pumps. Heavily modified Evolv ATX Travel size: Zen3 5800H, RTX 3060 Laptop GPU w/unlocked bios, 2x16 Kingston HyperX 3200 C20
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 19:55:17
(permalink)
devinishome
520w from techpowerup worked better?
It was a file I thought I could trust to be as the original one I was missing. USMC1419
devinishome
520w from techpowerup worked better?
From what I understand, johnksss's card had the same bios on all 3 switch position, so he took the LN2 520w bios that should already be on the card and flashed it.
I'll be getting my KP monday. Eager to compare it to my FTW3 Hybrid.
Yep flyingtoaster85
https://www.3dmark.com/pr/662518
15632
Nice! Sajin
https://www.3dmark.com/3dm/55171405
You guys like my new score. Dem clocks. LOL.
Exactly what I was talking about! :D
post edited by johnksss - 2020/12/19 20:08:04
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
Fuzzypunks
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2019/12/07 22:15:35
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 20:23:08
(permalink)
Use my Associate Code to get great deals on EVGA Products. Use it at Checkout! MVELW6K047QP0BC
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 20:50:02
(permalink)
@sajin So after taking another look.... And now it makes since with move all the sliders to the right.On the 520W vbios.Enforced Power LimitEPL=430 / PX1Max out power target - EPL=511W Max out voltage slider - EPL=520W Not sure about 450W vbios as of yet. Edit: Figured it out. It was user error. The slider was sitting on 120 instead of 121
post edited by johnksss - 2020/12/20 01:41:58
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
flyingtoaster85
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2016/12/10 22:24:59
- Location: Los Angeles
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 20:51:27
(permalink)
Fuzzypunks
flyingtoaster85
https://www.3dmark.com/pr/662518
15632
How did you get that Beauty? XOC Bios? What programs were you running at what settings? Temps?
I don't have the XOC bios. I put the AIO radiator into an igloo cooler with dry ice, and put a chunk of dry ice on the backplate. I had the LN2 bios active and both NVVDD dispswitches. It didn't seem to help my temperatures or my score much. Your core and mem speeds are on par with my 15632 run. I wonder why there is such a score difference.
post edited by flyingtoaster85 - 2020/12/19 21:09:01
Main: 10700k @ 5.4ghz, 3090 K|NGP|N Hydrocopper, 4x8 @4300 16-16-16-36, EVGA 1200 P2, MSI Z490 Unify, 5 radiators, 2 pumps. Heavily modified Evolv ATX Travel size: Zen3 5800H, RTX 3060 Laptop GPU w/unlocked bios, 2x16 Kingston HyperX 3200 C20
|
Sajin
EVGA Forum Moderator
- Total Posts : 49167
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 21:35:11
(permalink)
johnksss
@sajin
So after taking another look.... And now it makes since with move all the sliders to the right.
On the 520W vbios.
Enforced Power Limit
EPL=430 / PX1
Max out power target - EPL=511W
Max out voltage slider - EPL=520W
Not sure about 450W vbios as of yet.
Odd. Mine shows different. 
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 21:58:05
(permalink)
Only just barely broke 15K with stock cooling, just the window open for additional cooling (SoCal, so not too cold). Average clock at 2,160 MHz https://www.3dmark.com/pr/657718Using XOC bios and was pulling over 600W 1.2375 NVVDD 1.4 FBVDD 1.2 MSVDD 400/400 NV and MS Freq LLs 2, and OCPs off Haven't pushed the memory too much, without the XOC causes a hard crash above a +1200 offset. That's the next thing to play with.
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 21:59:30
(permalink)
Sajin
johnksss
@sajin
So after taking another look.... And now it makes since with move all the sliders to the right.
On the 520W vbios.
Enforced Power Limit
EPL=430 / PX1
Max out power target - EPL=511W
Max out voltage slider - EPL=520W
Not sure about 450W vbios as of yet.
Odd. Mine shows different.
So then it's only affected when using PX1. That would at least explain some of the power related issues people may be having. Not all of course. Edit: So I just tried it a few more times and now it's working. I hate when things are not just cut and dry. :(
post edited by johnksss - 2020/12/19 22:06:49
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
flyingtoaster85
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2016/12/10 22:24:59
- Location: Los Angeles
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:13:14
(permalink)
fragility_V1
Only just barely broke 15K with stock cooling, just the window open for additional cooling (SoCal, so not too cold). Average clock at 2,160 MHz
https://www.3dmark.com/pr/657718
Using XOC bios and was pulling over 600W
1.2375 NVVDD
1.4 FBVDD
1.2 MSVDD
400/400 NV and MS Freq
LLs 2, and OCPs off
Haven't pushed the memory too much, without the XOC causes a hard crash above a +1200 offset. That's the next thing to play with.
What’s your best score with default voltages? It seems like the 1.2+ NVVDD is causing heat throttling.
Main: 10700k @ 5.4ghz, 3090 K|NGP|N Hydrocopper, 4x8 @4300 16-16-16-36, EVGA 1200 P2, MSI Z490 Unify, 5 radiators, 2 pumps. Heavily modified Evolv ATX Travel size: Zen3 5800H, RTX 3060 Laptop GPU w/unlocked bios, 2x16 Kingston HyperX 3200 C20
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:18:51
(permalink)
flyingtoaster85
fragility_V1
Only just barely broke 15K with stock cooling, just the window open for additional cooling (SoCal, so not too cold). Average clock at 2,160 MHz
https://www.3dmark.com/pr/657718
Using XOC bios and was pulling over 600W
1.2375 NVVDD
1.4 FBVDD
1.2 MSVDD
400/400 NV and MS Freq
LLs 2, and OCPs off
Haven't pushed the memory too much, without the XOC causes a hard crash above a +1200 offset. That's the next thing to play with.
What’s your best score with default voltages? It seems like the 1.2+ NVVDD is causing heat throttling.
I was only getting around 14.7K using the OC bios and the the Precision slider maxed. Was power limited.
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:19:32
(permalink)
Also, that voltage seems pretty high for 15K
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:21:40
(permalink)
johnksss
Also, that voltage seems pretty high for 15K
Oh yah, don't think I won the lottery here. Wouldn't finish PR on 1.2.
|
gridironcpj
iCX Member
- Total Posts : 387
- Reward points : 0
- Joined: 2013/01/13 02:00:46
- Location: CA
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:33:03
(permalink)
Strange. I'm only getting 14.8K with an average clock of 2142MHz and memory offset at +1400MHz. I didn't touch the Classified Tool for this run. Mine is definitely not a lottery winner either. Far from it. https://www.3dmark.com/3dm/55181212
GPU: RTX 3090 KINGPIN | CPU: R9 5950X 4.7GHz @ 1.21V | Memory: 32GB (2x16GB) 3733MT/s 14-14-14-28 1T | Mobo: Crosshair VIII Dark Hero | Storage: WD SN850 2TB & Samsung 970 Evo Plus 2TB| Primary Display: ROG PG27UQ 4K 144Hz HDR 1000 | Chassis: Phanteks Enthoo Elite | PSU: EVGA 1600 T2
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:39:07
(permalink)
gridironcpj
Strange. I'm only getting 14.8K with an average clock of 2142MHz and memory offset at +1400MHz. I didn't touch the Classified Tool for this run. Mine is definitely not a lottery winner either. Far from it.
https://www.3dmark.com/3dm/55181212
You can do 15k with no memory offset....
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
NotoriouS^
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:47:31
(permalink)
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 22:50:25
(permalink)
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.
Good Question. I used: This is located in the profile folder for the gpu in question. [SETTINGS] VDDC_GENERIC_DETECTION=1 For the gpu in question. Also click the 3 voltage under settings/general.
post edited by johnksss - 2020/12/19 22:52:37
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
NotoriouS^
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 23:12:10
(permalink)
johnksss
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.
Good Question. I used:
This is located in the profile folder for the gpu in question.
[SETTINGS]
VDDC_GENERIC_DETECTION=1
For the gpu in question.
Also click the 3 voltage under settings/general.
Thank You i will check into that. Meanwhile, i finally made it into the 15's with x1. LN2 BIOS https://www.3dmark.com/pr/663187
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
gridironcpj
iCX Member
- Total Posts : 387
- Reward points : 0
- Joined: 2013/01/13 02:00:46
- Location: CA
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 23:13:04
(permalink)
johnksss
gridironcpj
Strange. I'm only getting 14.8K with an average clock of 2142MHz and memory offset at +1400MHz. I didn't touch the Classified Tool for this run. Mine is definitely not a lottery winner either. Far from it.
https://www.3dmark.com/3dm/55181212
You can do 15k with no memory offset....
Given some of the other scores I've seen for a given set of frequencies, I'm inclined to agree. However, it just isn't happening with my card. I rolled back one driver to see if the latest hotfix driver was the issue, but it wasn't. Here is a result with no memory offset applied. This is with the LN2 BIOS and a GPU Offset of +105MHz using MSI Afterburner. Edit: I forgot to link the result lol. https://www.3dmark.com/pr/663166
post edited by gridironcpj - 2020/12/19 23:41:02
GPU: RTX 3090 KINGPIN | CPU: R9 5950X 4.7GHz @ 1.21V | Memory: 32GB (2x16GB) 3733MT/s 14-14-14-28 1T | Mobo: Crosshair VIII Dark Hero | Storage: WD SN850 2TB & Samsung 970 Evo Plus 2TB| Primary Display: ROG PG27UQ 4K 144Hz HDR 1000 | Chassis: Phanteks Enthoo Elite | PSU: EVGA 1600 T2
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 23:30:28
(permalink)
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
NotoriouS^
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/19 23:49:47
(permalink)
johnksss
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.
Good Question. I used:
This is located in the profile folder for the gpu in question.
[SETTINGS]
VDDC_GENERIC_DETECTION=1
For the gpu in question.
Also click the 3 voltage under settings/general.
I don't seem to have that in my Afterburner folder in program files directory in the MSIAfterburner config. When you open afterburner, should it be reading mV? Mine does not
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
johnksss
CLASSIFIED Member
- Total Posts : 4673
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/20 00:02:25
(permalink)
NotoriouS^
johnksss
NotoriouS^
for you guys using afterburner, how did you get the core voltage slider unlocked? I haven't used afterburner in a very long time and dont remember it being locked before.
Good Question. I used:
This is located in the profile folder for the gpu in question.
[SETTINGS]
VDDC_GENERIC_DETECTION=1
For the gpu in question.
Also click the 3 voltage under settings/general.
I don't seem to have that in my Afterburner folder in program files directory in the MSIAfterburner config.
When you open afterburner, should it be reading mV? Mine does not
That is what you need to add inside the file VEN_10DEWHATEVERTHERESTSAYS. You will need to take full access of that file or it wont let you save it. You then need to insert those two lines I posted, then save. Restart MSIAB and it should show voltage.
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
808sting
iCX Member
- Total Posts : 462
- Reward points : 0
- Joined: 2012/04/13 15:04:51
- Location: US
- Status: offline
- Ribbons : 6
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/20 03:30:05
(permalink)
My ftw3 can barely break 14K using same setup. https://www.3dmark.com/pr/663778 LN2 bios with stock card switch settings using PX1. Going to play some games and burn-in card before I request XOC and use classy.
i9 13900KS, Asus ROG Hero Z690 MB, 32GB G.Skill DDR5-6400Gigabyte 4090 Gaming OCExternal open-loop w/Velocity2 WBCorsair 900D CaseFirecuda SSD 1TB & 2TB, EVO 970P 1TB, Black 8TBAsus & LG BD-RECorsair AX1600i PSLG 38GL950B-G
|
zak00
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2018/02/12 16:41:47
- Status: offline
- Ribbons : 0
Re: Okay lets hear it Highest Port Royal 3090 Kingpin Scores!
2020/12/20 06:51:59
(permalink)
Can you guys link the XOC VBios and the Classified tool?
|