OCF4n
New Member
- Total Posts : 29
- Reward points : 0
- Joined: 2021/05/27 08:11:10
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/18 17:27:00
(permalink)
Emwun Garand
kraade
OCF4n
It's not acceptable for 2k+ card in my opinion. And it blows my mind that no Youtuber has discovered and talked about this issue yet!!
As many cards are in the wild It would seem like this is a real small number, sorry for your luck but there is no evidence this is widespread
I had a 3080 Hybrid and 3080 Ti hybrid and both were dead silent , MY KPE started up like an old fridge and I hit the power button and unmounted the Rad and held it straight up with with some slight shaking and it cleared right up in about 5 seconds , Ran silent since June last year. The cooler internals are most like Asetek, Built for EVGA's design and I assure you its not a lack of care
Two threads full of people with pump issues across all 30 series cards, including Kingpin.
https://forums.evga.com/Kingpin-3090-pump-noise-m3230913.aspx
https://forums.evga.com/Hybrid-pump-noise-on-the-3xxx-series-m3176261.aspx
Here's my very own example.
https://youtu.be/dX4dNFJF-T4
Thank you Emwun. Was just about to post that lol. There's people they already did RMA twice because of the pump and still got a mini refrigerator/ compressor. So yes @kraade I would say it's a lack of care. Lack of care in terms of Quality Assurement in production for sure and then in the RMA department for not checking any possible pump issues before shipping it out to people who paid for a premium card! I haven't found yet one example on newer CPU AIO products with these issues. They are all silent. And EVGA claims they use the new Asetek pumps on their marketing materials (on 20 series too and they suffer from the same issues and you found even more threads there).
post edited by OCF4n - 2022/01/18 17:32:04
|
arview
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2020/09/24 06:59:42
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/19 17:36:46
(permalink)
Has anyone got their Optimus KP block yet?I ordered around July 29, 2021 and still haven't received mine :(
Corsair 5000D Airflow AMD Ryzen 9 5900X EVGA 3080 FTW3 HYBRID EVGA 3090 K|NGP|N HYBRID ROG STRIX B550-E GAMING MOBO 32gb G.Skill Trident Z RGB 1tb Nvme Primary drive 1tb Nvme Secondary drive Corsair 1200 Watt PSU 3 x 27" 165hz Monitors DZ60 Custom keyboard / Zilents v2 Switches Logitech G Pro Superlight
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/19 17:38:40
(permalink)
arview
Has anyone got their Optimus KP block yet?I ordered around July 29, 2021 and still haven't received mine :(
Shipped out 12/23, Received 12/28, Order placed July 29, 2021 05:40AM. Been in service since the beginning of the year.
|
arview
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2020/09/24 06:59:42
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/19 17:54:18
(permalink)
Weird, ordered mine at 1pm I’ll reach out to them. Thanks !
Corsair 5000D Airflow AMD Ryzen 9 5900X EVGA 3080 FTW3 HYBRID EVGA 3090 K|NGP|N HYBRID ROG STRIX B550-E GAMING MOBO 32gb G.Skill Trident Z RGB 1tb Nvme Primary drive 1tb Nvme Secondary drive Corsair 1200 Watt PSU 3 x 27" 165hz Monitors DZ60 Custom keyboard / Zilents v2 Switches Logitech G Pro Superlight
|
Emwun Garand
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2016/10/19 11:26:25
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/19 21:18:52
(permalink)
arview
Weird, ordered mine at 1pm I’ll reach out to them. Thanks !
Uhh, I JUST got mine on Monday and I ordered at 7:52am on July 29th. Order #5258 Another user on the WC discord got hers, she was order 5259.
post edited by Emwun Garand - 2022/01/19 21:20:10
|
bavor
SSC Member
- Total Posts : 995
- Reward points : 0
- Joined: 2008/02/20 21:24:43
- Status: offline
- Ribbons : 6
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 00:14:19
(permalink)
arview
Weird, ordered mine at 1pm I’ll reach out to them. Thanks !
You probably have a long wait.
|
ajreynol
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2012/12/28 17:24:48
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 13:02:10
(permalink)
these waits. oof.
I just got my Kingpin and was looking to go with an Optimus block (I have one for my 3090 Strix which I was going to sell in favor of this) but MAN. I am NOT excited about the idea of having to wait 6+ months for the block. I'll be looking at 4000-series card announcements by the time I get the block. I think I'll either return the Kingpin or sell it (haven't even taken it out of the box) and maybe try for another Kingpin next time around.
Kinda sad, as I've never even seen a Kingpin before. Now I still may never, as taking it out of the box is almost certainly not going to happen unless I find an Optimus block on eBay or something.
Sadage.
|
jaredbyoung
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/10/15 16:42:59
- Status: offline
- Ribbons : 1
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 15:11:24
(permalink)
ajreynol
these waits. oof.
I just got my Kingpin and was looking to go with an Optimus block (I have one for my 3090 Strix which I was going to sell in favor of this) but MAN. I am NOT excited about the idea of having to wait 6+ months for the block. I'll be looking at 4000-series card announcements by the time I get the block. I think I'll either return the Kingpin or sell it (haven't even taken it out of the box) and maybe try for another Kingpin next time around.
Kinda sad, as I've never even seen a Kingpin before. Now I still may never, as taking it out of the box is almost certainly not going to happen unless I find an Optimus block on eBay or something.
Sadage.
I'm sure the largest portion of orders for this block were placed in the first 24-48hrs. Once they get those early pre-orders out of the way they'll probably move through the waitlist more quickly.
|
q437637
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2016/08/02 08:19:52
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 15:45:13
(permalink)
Emwun Garand
arview
Weird, ordered mine at 1pm I’ll reach out to them. Thanks !
Uhh, I JUST got mine on Monday and I ordered at 7:52am on July 29th.
Order #5258
Another user on the WC discord got hers, she was order 5259.
Wait is that Chicago time? 7:52am central? 5290. I am on west coast woke up late that day, dang … Looks like another month, maybe early march. Sadly no other choice
|
ajreynol
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2012/12/28 17:24:48
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 16:08:57
(permalink)
jaredbyoung
ajreynol
these waits. oof.
I just got my Kingpin and was looking to go with an Optimus block (I have one for my 3090 Strix which I was going to sell in favor of this) but MAN. I am NOT excited about the idea of having to wait 6+ months for the block. I'll be looking at 4000-series card announcements by the time I get the block. I think I'll either return the Kingpin or sell it (haven't even taken it out of the box) and maybe try for another Kingpin next time around.
Kinda sad, as I've never even seen a Kingpin before. Now I still may never, as taking it out of the box is almost certainly not going to happen unless I find an Optimus block on eBay or something.
Sadage.
I'm sure the largest portion of orders for this block were placed in the first 24-48hrs. Once they get those early pre-orders out of the way they'll probably move through the waitlist more quickly.
Hmm. Well, you've given me something to think about. I still don't know if it's worth swapping this in for my 3090 Strix which has been very well behaved, has a second HDMI port, and is pretty consistent in its 2100-2160 performance range. BUT the opportunity to throw more power at it if I want to, the cute screen, and that extra 5% is tempting. Especially considering I can easily sell the Strix for what I got the KPE for. I have a couple weeks to decide (I did start an RMA today with EVGA for it just in case), but I'd need to know that I could get that block in a reasonable amount of time. Because again, come summer time, we're all going to be prepping for that 4000-series launch. I wouldn't have had time to enjoy the KPE in my loop if we're talking no block until March or April, you know?
|
ajreynol
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2012/12/28 17:24:48
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 16:13:48
(permalink)
q437637
Emwun Garand
arview
Weird, ordered mine at 1pm I’ll reach out to them. Thanks !
Uhh, I JUST got mine on Monday and I ordered at 7:52am on July 29th.
Order #5258
Another user on the WC discord got hers, she was order 5259.
Wait is that Chicago time? 7:52am central?
5290. I am on west coast woke up late that day, dang … Looks like another month, maybe early march. Sadly no other choice
Is Optimus the only company making KPE blocks? I've looked around, but haven't seen any others. I know this is a very niche card, but I expected at least EKWB would have one. Nope. The card would be literally unusable in my rig without being able to add it to my loop. I have no openings to place its rad assembly.
|
Flint 1760
Omnipotent Enthusiast
- Total Posts : 8149
- Reward points : 0
- Joined: 2009/04/26 15:44:26
- Status: offline
- Ribbons : 45
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 16:52:26
(permalink)
ajreynol
Is Optimus the only company making KPE blocks? I've looked around, but haven't seen any others. I know this is a very niche card, but I expected at least EKWB would have one. Nope. The card would be literally unusable in my rig without being able to add it to my loop. I have no openings to place its rad assembly.
Unfortunately it is Optimus or EVGA at the present time. EK, Aquacomputer, Bitspower, Watercool, and Alphacool have nothing and may not ever.
post edited by Flint 1760 - 2022/01/20 16:55:37
|
ajreynol
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2012/12/28 17:24:48
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 16:58:30
(permalink)
Flint 1760
ajreynol
Is Optimus the only company making KPE blocks? I've looked around, but haven't seen any others. I know this is a very niche card, but I expected at least EKWB would have one. Nope. The card would be literally unusable in my rig without being able to add it to my loop. I have no openings to place its rad assembly.
Unfortunately it is Optimus or EVGA at the present time. EK, Aquacomputer, Bitspower, Watercool, and Alphacool have nothing and may not ever.
will_smith_pain.jpg
|
bavor
SSC Member
- Total Posts : 995
- Reward points : 0
- Joined: 2008/02/20 21:24:43
- Status: offline
- Ribbons : 6
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/20 17:45:36
(permalink)
jaredbyoung
I'm sure the largest portion of orders for this block were placed in the first 24-48hrs. Once they get those early pre-orders out of the way they'll probably move through the waitlist more quickly.
Considering that they haven't even hit noon orders on the first day of preorders, 7 or 8 weeks after they started shipping preorders, its still going to be a very long wait.
|
Emwun Garand
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2016/10/19 11:26:25
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 08:03:13
(permalink)
|
ShawnB420
iCX Member
- Total Posts : 401
- Reward points : 0
- Joined: 2015/06/15 21:34:37
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 08:22:08
(permalink)
Considering they don't respond to emails or anything I'd suggest avoiding buying from them. They make a great block but are among the worst, if not the worst company I've ever dealt with. If I didn't already have my block I'd cancel my order and sell the KPE rather then give these POS a single dime. I've only been emailing and trying to contact them for over 3 weeks now without a single reply. For the longest time I was one of if not the biggest defender of Optimus. Not anymore. They deserve to have their business die for the lack of CS and their refusal to hire one.
post edited by ShawnB420 - 2022/01/21 08:35:12
|
jaegernickson
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2021/06/07 10:10:13
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 09:07:19
(permalink)
Could always list the kingpin and get in line for the block. If it sells before you get the block great, if not, you get the block and keep the card =)
|
alpharius194
Superclocked Member
- Total Posts : 165
- Reward points : 0
- Joined: 2020/11/09 14:53:38
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 09:13:16
(permalink)
Just got my shipping notice so they’ve made some progress up to 527x. Black/raw copper. Good luck to those still waiting
|
tbrown7552
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2010/09/04 17:52:00
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 09:18:06
(permalink)
Just got my shipping notification.
Order 5268
Ordered: 7/29/2021 9:24 AM
Colorway: Black/Nickel
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 09:29:22
(permalink)
Nice to see the raw copper variants starting to be shipped out. Shawn, are you having issues with the block you might be willing to share on? It might help other users to see what issues you encountered during your use. I believe Optimus converted your hybrid to their block. I know of atleast one other user who is having issues with the alignment of the front and rear block with the terminal block which is also impacting the overall seal of the unit. For those who are getting their blocks, I posted my build notes here in this thread a few pages back (page 19 of this thread). I still have yet to get my KP into my pc due to my house being renovated, but I did get the block to seal and pass the pressure test after having initial leaks.
post edited by Gotspeed_2000 - 2022/01/21 09:37:21
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
ShawnB420
iCX Member
- Total Posts : 401
- Reward points : 0
- Joined: 2015/06/15 21:34:37
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 10:42:40
(permalink)
Gotspeed_2000
Nice to see the raw copper variants starting to be shipped out.
Shawn, are you having issues with the block you might be willing to share on? It might help other users to see what issues you encountered during your use. I believe Optimus converted your hybrid to their block. I know of atleast one other user who is having issues with the alignment of the front and rear block with the terminal block which is also impacting the overall seal of the unit.
For those who are getting their blocks, I posted my build notes here in this thread a few pages back (page 19 of this thread). I still have yet to get my KP into my pc due to my house being renovated, but I did get the block to seal and pass the pressure test after having initial leaks.
No issues at all with my block and card. I'm trying to get ahold of them on an unrelated issue. Looking to exchange some hardline fittings for compression ones and enquire about ordering something else. I'm loving the block, just PO'd over the CS. It's just the usual communication issues I'm having
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 10:55:59
(permalink)
ShawnB420
No issues at all with my block and card. I'm trying to get ahold of them on an unrelated issue. Looking to exchange some hardline fittings for compression ones and enquire about ordering something else. I'm loving the block, just PO'd over the CS.
It's just the usual communication issues I'm having
Shawn, Thanks for clarifying that. I hope they get back to you soon on this issue. I agree that their products are that good, but yes getting replies is a bit tough to come by at times. On a side note, a build I am about to work on I did recommend their AMD block so the guy went to their site and ordered it. I told him that he would need to wait after he ordered it, but to our surprise he got his shipping notification the next day. This was for a AM4 block. They seem to be getting a decent number of reported shipping notifications this week so maybe they got a few things figured out or caught up with the materials needed to send these blocks out.
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
ShawnB420
iCX Member
- Total Posts : 401
- Reward points : 0
- Joined: 2015/06/15 21:34:37
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 12:06:32
(permalink)
Gotspeed_2000
ShawnB420
No issues at all with my block and card. I'm trying to get ahold of them on an unrelated issue. Looking to exchange some hardline fittings for compression ones and enquire about ordering something else. I'm loving the block, just PO'd over the CS.
It's just the usual communication issues I'm having
Shawn,
Thanks for clarifying that. I hope they get back to you soon on this issue. I agree that their products are that good, but yes getting replies is a bit tough to come by at times. On a side note, a build I am about to work on I did recommend their AMD block so the guy went to their site and ordered it. I told him that he would need to wait after he ordered it, but to our surprise he got his shipping notification the next day. This was for a AM4 block. They seem to be getting a decent number of reported shipping notifications this week so maybe they got a few things figured out or caught up with the materials needed to send these blocks out.
Yeah just frustrated with the CS. Just maddening they haven't hired a team to handle it yet or have a ticket system or something better then the void they have now. Everything else I can't say enough good things about them. Just frustrating as hell to deal with cause there will be times I get an instant response and can even have a conversation and others when it's like you're screaming into the void. Makes me want to have a hair pulling tantrum but I can't since I'm an adult so I vent here
|
tbrown7552
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2010/09/04 17:52:00
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/21 15:31:47
(permalink)
Looks like their shipping cutoff is 4PM EST. Card is in carriers hands and according to them will be here tomorrow. I figured they would print the label and it would go out next week.
|
repo1979
FTW Member
- Total Posts : 1116
- Reward points : 0
- Joined: 2017/02/21 20:37:56
- Location: UTAH
- Status: offline
- Ribbons : 4
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/22 11:39:23
(permalink)
I got another reply from Optimus on pre orders and they are still aways from completion and Matt said to expect several months for orders outside of pre order. I think I'm just gonna cancel my order they are really behind and waiting up to 6 months may not suit well for me anyway. Good luck to all
|
Nereus
Captain Goodvibes
- Total Posts : 18155
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/22 11:40:52
(permalink)
repo1979
I got another reply from Optimus on pre orders and they are still aways from completion and Matt said to expect several months for orders outside of pre order. I think I'm just gonna cancel my order they are really behind and waiting up to 6 months may not suit well for me anyway. Good luck to all
|
Gotspeed_2000
SSC Member
- Total Posts : 818
- Reward points : 0
- Joined: 2021/01/07 18:53:17
- Status: offline
- Ribbons : 5
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/22 18:36:03
(permalink)
repo1979
I got another reply from Optimus on pre orders and they are still aways from completion and Matt said to expect several months for orders outside of pre order. I think I'm just gonna cancel my order they are really behind and waiting up to 6 months may not suit well for me anyway. Good luck to all
It all comes down to your financials and if you plan on keeping your KP. If you are keeping your KP, then I'd keep my order if you have the financial means to. I really don't think there will be another option to come out for the 3090 KP. It's either this or the HC but unless you buy the MP5 works active rear plate it might be very hard to get similar results when compared to the Optimus block. The earlier you order, the faster you'll get it. It may not be the answer you are looking for, but it's I do think this is the situation. I'm hoping that the pattern Optimus has in the past with new block releases holds true to the KP block at this point. While they may have struggled to get past the initial pre-orders like other blocks, once they catch up you are looking at about 4-8 weeks.
Corsair 1000D Obsidian Case I9 13900K with EK Velocity 2 Block ASUS 4090 Strix with Optimus Block ASUS Hero Z690 Mobo 64GB DDR5 RAM Trident 6000Mhz 1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive EVGA 1600 Watt PSU 30 Lian Li AL120 fans 2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with Two EK Pump/res combos. Custom hard tube loop. Samsung G7 32" Monitor EVGA Z20 Keyboard Glorious Model O
|
BuffNerd
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2017/09/20 03:01:32
- Location: Louisiana, USA
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/23 03:03:56
(permalink)
I'm order #5266, looks like I've been skipped. I guess they haven't made my color/selections yet.
Satin Nickel/ Pro XE Nickel
|
ShawnB420
iCX Member
- Total Posts : 401
- Reward points : 0
- Joined: 2015/06/15 21:34:37
- Status: offline
- Ribbons : 0
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/23 04:02:41
(permalink)
repo1979
I got another reply from Optimus on pre orders and they are still aways from completion and Matt said to expect several months for orders outside of pre order. I think I'm just gonna cancel my order they are really behind and waiting up to 6 months may not suit well for me anyway. Good luck to all
I still can’t get a reply from anyone. This is what pisses me off the most with them, some can get reply’s and others go into the void. No matter how many emails, tweets or direct messages on Reddit, I get nothing.
|
AtozGlue
New Member
- Total Posts : 95
- Reward points : 0
- Joined: 2020/07/11 00:35:39
- Status: offline
- Ribbons : 1
Re: OPTIMUS SIGNATURE GPU BLOCK - KINGPIN 3090
2022/01/23 07:17:41
(permalink)
Optimus replied to my email. Said my block should ship within 2 weeks.
|