bcavnaugh
I think some are not allowing a Break In time for the Water Block and Thermal Pads seat well.
This was why I created the above Post https://forums.evga.com/FindPost/2966840
The Longer I used the KPE Hydro Copper Water Block the Temperatures are Getting Better meaning Lower.

I'll leave it in for now to test it. Guess we'll see.

bcavnaugh

Jahusaphet

bcavnaugh
I think some are not allowing a Break In time for the Water Block and Thermal Pads seat well.
This was why I created the above Post https://forums.evga.com/FindPost/2966840
The Longer I used the KPE Hydro Copper Water Block the Temperatures are Getting Better meaning Lower.

I'll leave it in for now to test it. Guess we'll see.

If your RMA Returned KPE Hydro Copper Water Block is leaking then should you be using it?

I'm using the original one that has the broken acrylic by the led screen. Hasn't been sent back yet. Going to call them tomorrow.

Current Running Temperatures after 2 Weeks of usage running with the KPE Hydro Copper Water Block.
Running a Standard Custom Water Loop as posted in Post #101 Still using TF8 Thermal Paste.
Coolant Temperature 27°C & Room Temperature 21°C
GPU1 39°C | GPU2 40°C | GPU PCB 42°C | Mem1 46°C
2040 MHz 99% Utilization or Load 1.050 Volts and TDP 93%

HawkOculus

bcavnaugh
Current Running Temperatures after 2 Weeks of usage running with the KPE Hydro Copper Water Block.
Running a Standard Custom Water Loop as posted in Post #101 Still using TF8 Thermal Paste.
Coolant Temperature 27°C & Room Temperature 21°C
GPU1 39°C | GPU2 40°C | GPU PCB 42°C | Mem1 46°C
2040 MHz 99% Utilization or Load 1.050 Volts and TDP 93%

Those are great numbers. It’s a 360 rad you have on it correct? What are your fans?

Same> https://forums.evga.com/FindPost/2963823
Push/Pull  $10.24 Fan, 120x38mm, 116CFM 
$84.99 Radiator, 3x120mm Fans, 54mm Thick, 30-FPI Copper  Part No.  HX-360XC and Basic D5 Pump

I am on default and hitting 46c in a first run of Superposition 8k.

bcavnaugh

Jahusaphet
I am on default and hitting 46c in a first run of Superposition 8k.

What about RT Benchmark like Port Royal

I'll try it in a bit and let you know. On my AiO I only reached 41C in port royal.

I am breaking out the 420 Thick boi I have and trying that as a last resort. 

bcavnaugh
What is a "420 Thick boi" ?

Its just the EK 420mm rad I have. Its 45mm thick. Not the thickest rad but that's the nickname I gave it. Just trying to be lighthearted.

bcavnaugh
This "boi" through me off a little
What are the (FPI) Fins Per Inch?
I looked but could not find out.
This one is doing really well for me. (Single Loop GPU only)
$84.99 Radiator, 3x120mm Fans, 54mm Thick, 30-FPI Copper   Part No.  HX-360XC

It says 16 FPI ouch, https://www.ekwb.com/shop...olstream-ce-420-triple

https://koolance.com/erm-3k3uc-liquid-cooling-system-copper
 
go big sir!

AHowes
Hehe I just picked up a Corsair Hydro XR5 420 while at microcenter to pick up yet more parts and 2 new EK res just cause I got a spot for it and have plenty of corsair ML140 pro fans doing nothing.

So that will make 2x EK XE 360, 2x EK XE 480 and Corsair XR5 420 rad and 2 EK Dual D5 pump tops.. if that dont make a dent I give up.

I'm hoping the dual pump tops x2 make for some crazy turbulence to help increase the cooling in the rads.

I get started tomorrow night or wed morning on the change over.

Yep! you will have the room

 


 


 

zurvv
holy cow that is a big case :)

It was a joke on AHowes Post Above, only I have this Case View System.
 

I am over the KP Hype, Flow is there, reseated multiple times now, temps are meh, this thing is going up for sale end of july more than likely. Here are the temps under full load.
2 xe480 rads
1 ce420
dual d5
the heat out of this bad boy is something else, in my opinion for the $300 or what ever it was this hydrcopper is terrrrrible.
https://imgur.com/a/iPU95Tg
 
low temps when there is no load.
 
I really expected a lot more, these temps are more than enough for gaming, 2145/2160 stable, the whole claim of 2200 is a bit of a far reach. 

Thanks man! I was getting really defeated lol

bcavnaugh

vladdimplr
Thanks man! I was getting really defeated lol

You are welcome.
How is iCUE Getting Along with PX1 0.3.19.0?

No issues what so ever, how ever its only gpu 1 temp and fan 1 fan 2 (which arent there) so its pretty useless lol iCue has been pretty decent for me.