EVGA

I had to put her down but it was time

Author
agent8
CLASSIFIED ULTRA Member
  • Total Posts : 5129
  • Reward points : 0
  • Joined: 2007/03/03 20:28:24
  • Status: offline
  • Ribbons : 20
2017/01/20 13:30:45 (permalink)
No, not a pet or anything living but my office chair. My wife and my now deceased Father-in law bought this as an anniversary present years and years ago for me. They went to all kinds of stores and sat in dozens of chairs and finally found the perfect chair. It was an ordinary black office chair but I have sat in this chair every single day and there was no place in the world that was more comfortable to sit. I wasted hours watching movies, playing games and even working in this chair. If you look at the arm rests, the WOOD is actually worn smooth from years of use. It has been an embarrassment in our house because the rest of our house is very clean but the rule was as long as I turn it so the stuffing and wood can't be seen when I wasn't using it, it was ok. I bet there have been times where I have sat in it almost 12 hours straight on a day off. It fits me perfectly and it is also sentimental but at this point, it's time to let it go. And yes, it looks like an average office max, best buy ect... chair but it isn't. It was different. More padding and just better built. The idea of having it reupholstered was thrown around but she's just too far gone...

 
I kinda went the cheap and dangerous route because I am tired of going to stores only to go through disappointment so I spent 100 bucks on this one from Ebay. https://www.amazon.com/Gaming-High-back-Computer-Ergonomic-Design/dp/B01HNTLIM4/ref=sr_1_1?ie=UTF8&qid=1484892456&sr=8-1&keywords=rc1+gaming+chair
 
I wanted the white one but it just seemed like it would get dirty so I got the blue one. The padding isn't the same, it doesn't feel near as sturdy as the old one but I am going to give it a shot. Paypal offers money back on return shipping so that's why I went that route, plus it was 10 bucks cheaper than amazons. It's a little campy with the "racing" theme but so far, so good.

#1

21 Replies Related Threads

    thorimmortal
    SSC Member
    • Total Posts : 512
    • Reward points : 0
    • Joined: 2006/01/01 11:12:11
    • Status: offline
    • Ribbons : 8
    Re: I had to put her down but it was time 2017/01/20 13:40:10 (permalink)
    Well at lest you got full use out of her.
     
    How is the height of the new one? Seems like every chair I try is really tall pushing my legs into my keyboard tray.
    #2
    agent8
    CLASSIFIED ULTRA Member
    • Total Posts : 5129
    • Reward points : 0
    • Joined: 2007/03/03 20:28:24
    • Status: offline
    • Ribbons : 20
    Re: I had to put her down but it was time 2017/01/20 13:54:06 (permalink)
    It is adjustable and can go pretty low. From the floor to the top of the armrest is about 24" at the lowest setting and has about a 7-8 inch range to go higher. From the floor to the top of the seat where your legs would be an issue is 17" at it's lowest setting. The head pillow is kinda weak and the foot rest that slides out is kind of weird because the weight of your legs causes the chair to lean forward unless it is really inclined. It goes completely horizontal too but I feel like I am getting my teeth cleaned when I recline it that far.
    Save
    post edited by agent8 - 2017/01/20 13:55:48
    #3
    Nozler
    CLASSIFIED Member
    • Total Posts : 2051
    • Reward points : 0
    • Joined: 2009/10/28 10:51:49
    • Location: Ottertail county,Minnesota,USA
    • Status: offline
    • Ribbons : 1
    Re: I had to put her down but it was time 2017/01/20 14:03:56 (permalink)
    RIP old chair  just imagine how many farts it had to endure thats probably why the covering is shot to many gas explosions  Grats on the new chair.

    heatware
     
    #4
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31085
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: I had to put her down but it was time 2017/01/20 14:23:23 (permalink)
    I think you held on TOO Long, unless you used  seat cover -- it was time to put it down
    Glad you found a new one that should work
    (edit typo)
    post edited by Cool GTX - 2017/01/20 15:13:32

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #5
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49136
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: I had to put her down but it was time 2017/01/20 14:59:32 (permalink)
    Lol. I'd say it was about time. 
    #6
    yodap
    CLASSIFIED Member
    • Total Posts : 4669
    • Reward points : 0
    • Joined: 2011/05/15 06:13:40
    • Location: NY, Upstate
    • Status: offline
    • Ribbons : 8
    Re: I had to put her down but it was time 2017/01/20 17:13:16 (permalink)
    Throw her up on fleabay.


     

     
    #7
    agent8
    CLASSIFIED ULTRA Member
    • Total Posts : 5129
    • Reward points : 0
    • Joined: 2007/03/03 20:28:24
    • Status: offline
    • Ribbons : 20
    Re: I had to put her down but it was time 2017/01/20 18:05:20 (permalink)
    yodap
    Throw her up on fleabay.


    I would hate to find anyone THAT desperate to get my smelly worn out fart chair.
    #8
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49136
    • Reward points : 0
    • Joined: 2010/06/07 21:11:51
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: I had to put her down but it was time 2017/01/20 18:35:48 (permalink)
    agent8
    yodap
    Throw her up on fleabay.


    I would hate to find anyone THAT desperate to get my smelly worn out fart chair.



    #9
    HAZMAN_THE_GREAT
    CLASSIFIED Member
    • Total Posts : 4805
    • Reward points : 0
    • Joined: 2011/12/01 04:40:46
    • Location: Planet Earth
    • Status: offline
    • Ribbons : 7
    Re: I had to put her down but it was time 2017/01/20 20:15:59 (permalink)
    agent8
    yodap
    Throw her up on fleabay.


    I would hate to find anyone THAT desperate to get my smelly worn out fart chair.


    Imagine all the other things you did in your chair besides farting at the computer.


    #10
    Dukman
    FTW Member
    • Total Posts : 1496
    • Reward points : 0
    • Joined: 2009/08/15 09:47:59
    • Location: They keep telling me Zion
    • Status: offline
    • Ribbons : 6
    Re: I had to put her down but it was time 2017/01/20 20:22:20 (permalink)

     
    Dude... That is like the Walking Dead of office chairs.  

    Heatware



     
     
    #11
    agent8
    CLASSIFIED ULTRA Member
    • Total Posts : 5129
    • Reward points : 0
    • Joined: 2007/03/03 20:28:24
    • Status: offline
    • Ribbons : 20
    Re: I had to put her down but it was time 2017/01/20 21:09:25 (permalink)
    My wife walked in and I was sitting on the old chair again with the new one sitting beside it. I said "just one more day!!" She just shook her head.
    #12
    kougar
    CLASSIFIED Member
    • Total Posts : 3034
    • Reward points : 0
    • Joined: 2006/05/08 10:11:19
    • Status: offline
    • Ribbons : 22
    Re: I had to put her down but it was time 2017/01/21 01:56:16 (permalink)
    Holy smokes. I don't feel so bad about my chair now...  
     
    Hope your new one can last close to as long!


    Have water, will cool. 
    #13
    RainStryke
    The Advocate
    • Total Posts : 10616
    • Reward points : 0
    • Joined: 2007/07/19 19:26:55
    • Location: Kansas
    • Status: offline
    • Ribbons : 60
    Re: I had to put her down but it was time 2017/01/21 02:16:01 (permalink)
    Ha! I can relate... I have a hard time getting rid of computer chairs, the only one i've thrown away in the past was one that broke on me when leaning back and the back support busted off and cut me in the waist pretty bad when I landed on the metal part that links the back support to the chair I was bleeding like crazy.
     
    Right now I am at the point that one or two need to go in the trash, at the very least my wife's old PC chair that feels like your sitting on a pole because all of the padding wore down. My oldest chair does not look quite as bad, but I had tears with exposed stuffing as well. I ended up slapping duct tape on all of the big tears in the chair and it really held it together pretty well... It's been an extra chair for whoever is hanging out with me in the man cave and friends don't seem to mind it. I've had that chair for about 12 years now and it's still not too bad... mainly cause it was retired as my daily chair about 6 years ago and is rarely used. I thought for sure my last chair was going to out last my torn up one... It was a big and tall chair from Costco, meant to support people up to 400LB. It ended up causing me back pains since the chair started to lean to one side more than the other due to cheap materials used at the base of the chair... ended up putting up with it for a total of 6 years. Just recently replaced my PC chair with this tempur-pedic chair. Couldn't be happier... the seat stays nice and cool after long sessions on the PC and it's memory foam, so it's super comfortable. From looks alone I would of never bought it... I still gave it a try and once I sat down in it at my local Staples, I knew I was going to buy it.

    Intel i9 10900K
    MSI MEG Z490 ACE
    ASUS TUF RTX 3090
    32GB G.Skill Trident Z Royal 4000MHz CL18
    SuperFlower Platinum SE 1200w
    Samsung EVO 970 1TB and Crucial P5 1TB
    Cougar Vortex CF-V12HPB x9
    #14
    loveha
    Omnipotent Enthusiast
    • Total Posts : 10302
    • Reward points : 0
    • Joined: 2009/09/26 01:51:22
    • Location: Beulah Michigan
    • Status: offline
    • Ribbons : 65
    Re: I had to put her down but it was time 2017/01/21 05:23:54 (permalink)
    I find shopping for chairs difficult as well. I don't own one of those crazy gaming chairs. I went to a Staples or whatever, and just sat in the store for about two hours. Yep, just sat. Last chair I tried, because it was almost $300 I think it was, was a tempurpedic office chair. Only say a few minutes compared to the others where I sat for way longer. No headrest, but when I'm gaming I don't need it, and if I'm watching something I'm slouching anyways. Thing is amazing, and after 3 years, the cushion is just as soft. The problem with cheap chairs...padding that goes flat.

    @Rain - Going to love your chair. If mine ever falls, I'm buying another one. It's that good. I need to check out my brother's chair. He got one of those high end expensive gaming chairs. Has had it for a couple years now. Want to see if it is as soft as it was when he bought it. Even then, don't think I would buy one, just don't like the looks of them.
    post edited by loveha - 2017/01/21 05:39:08

    Case - Phanteks Enthoo Evolv X
    Mobo - EVGA X570 FTW
    CPU - AMD Ryzen 9 5900X
    RAM - 32GB Trident Z Royal 3600MHz 14-14-14-34
    GPU - EVGA RTX 3080 Ti FTW3 Ultra Gaming
    PSU - Seasonic Prime TX-1000
    Heatkiller IV CPU Waterblock / Heatkiller V GPU Waterblock
    Heatkiller V EBC Active Backplate / Two Heatkiller Rad 360 L
    Six Noctua NF-A12x25 / Heatkiller D5 Pump
    #15
    bdary
    Omnipotent Enthusiast
    • Total Posts : 10553
    • Reward points : 0
    • Joined: 2008/04/25 14:08:16
    • Location: Florida
    • Status: offline
    • Ribbons : 118
    Re: I had to put her down but it was time 2017/01/21 10:50:08 (permalink)
    Beyond well used is all I can say...


     
     
     
     
     
     
     
     
     
     
     
    #16
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 84564
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Netherlands
    • Status: offline
    • Ribbons : 86
    Re: I had to put her down but it was time 2017/01/21 11:55:00 (permalink)
    I would say you got the money out of it. You know when you're gaming or working with a PC a good chair to sit in is really important. This is my chair. Sorry for the poor picture quality but it has a new look and the mix of that with wood gives it a nice nostalgic look.
     


    AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

    #17
    RainStryke
    The Advocate
    • Total Posts : 10616
    • Reward points : 0
    • Joined: 2007/07/19 19:26:55
    • Location: Kansas
    • Status: offline
    • Ribbons : 60
    Re: I had to put her down but it was time 2017/01/21 22:24:13 (permalink)
    loveha

    @Rain - Going to love your chair. If mine ever falls, I'm buying another one. It's that good. I need to check out my brother's chair. He got one of those high end expensive gaming chairs. Has had it for a couple years now. Want to see if it is as soft as it was when he bought it. Even then, don't think I would buy one, just don't like the looks of them.



    Yeah, I'm pretty happy with it. A buddy of mine just got a standing desk and i've been considering trying something like that out for my set-up.

    Intel i9 10900K
    MSI MEG Z490 ACE
    ASUS TUF RTX 3090
    32GB G.Skill Trident Z Royal 4000MHz CL18
    SuperFlower Platinum SE 1200w
    Samsung EVO 970 1TB and Crucial P5 1TB
    Cougar Vortex CF-V12HPB x9
    #18
    quadlatte
    CLASSIFIED ULTRA Member
    • Total Posts : 5427
    • Reward points : 0
    • Joined: 2006/09/14 16:52:58
    • Location: Greensboro, NC
    • Status: offline
    • Ribbons : 56
    Re: I had to put her down but it was time 2017/01/22 10:26:07 (permalink)
    i was attached to my old chair, a nice HON professional series chair. thing was super sturdy and comfy, sadly i somehow forgot it when i moved from ohio.

                                   
                                                 Heatware: http://heatware.com/eval.php?id=72498
    #19
    Doubles
    FTW Member
    • Total Posts : 1108
    • Reward points : 0
    • Joined: 2008/12/26 02:51:04
    • Location: At the bar hitting on Bargoyles
    • Status: offline
    • Ribbons : 2
    Re: I had to put her down but it was time 2017/01/23 07:59:16 (permalink)
    I'm sorry for your loss :D
     
    You could have just tossed a blanket over it and squeezed a few more years out of it!

    PC: i7 5930K// MSI Gaming 7//4x4 HyperX Predator 3000// MSI GTX 980ti// EVGA Supernova G2 1000w// Samsung 950 PRO m.2// Thermaltake Core P5 case// Dell S2716DG
    WC Setup:  XSPC Raystorm red// Blackice Nemesis 480 red rad// Monsoon hardline blood red// XSPC photon 270 res red// Uber D5 pump red
    #20
    agent8
    CLASSIFIED ULTRA Member
    • Total Posts : 5129
    • Reward points : 0
    • Joined: 2007/03/03 20:28:24
    • Status: offline
    • Ribbons : 20
    Re: I had to put her down but it was time 2017/01/23 08:20:34 (permalink)
    I tried the blanket thing and even some black tape but it was just too far gone. I like the wood blend of that chair, it looks sweet. I may end up getting another chair for my music room or moving this one into there. I don't think I will go with the racing style again. I like the chair but it is almost too form fitting. It makes me have great posture but I want a big pillow-like black leather chair I can get lost in sometimes.
    #21
    CptSpig
    SSC Member
    • Total Posts : 736
    • Reward points : 0
    • Joined: 2011/11/21 11:12:11
    • Location: Sunny California
    • Status: offline
    • Ribbons : 1
    Re: I had to put her down but it was time 2017/01/24 15:33:02 (permalink)
    I wonder what was growing in that chair?
    You should have put that down a long time ago!




     
    #22
    Jump to:
  • Back to Mobile