bigrelly

     I think i have it cool now lol.   

First off, welcome to the thread!

Second, what on earth are you pumping @ 120°C?!  I threw DICE in my loop and it quit pumping long before -50°C

johnksss

that looks more like a dual phase head block....

That's what I though,  but the pump confuses me

looks like a socket 1156 too should grab that mobo from the bot with that set up for sure

it's some gigabyte board...

Its a Gigabyte board with a built in waterblock, Everyone should have known it was the UD7

http://www.newegg.com/Pro...x?Item=N82E16813128413

I really should have known I almost bought that board......dough.......


My chiller was kind of a bust @4.6 with 1.575 vcore it idles at around 5 degrees and goes up to 50 in a vantage run. Which isnt bad but now that my vid card is on normal water it gets alot warmer and I lose about 2000 points gpu score at same clocks I had before. Not an epic fail but doesent even match a rad out the window in january oh well revision 2 starts in a few days. I think it would be much better suited as a socket 1156 chiller if I ever build another rig

johnksss

Rudster816

Its a Gigabyte board with a built in waterblock, Everyone should have known it was the UD7

http://www.newegg.com/Pro...x?Item=N82E16813128413

if that we're the case...you should have known by the usb 3.0 right on the side of the board instead of looking it up on newegg...rotflmao.


i just glanced at it from my phone, but once i brought it up. big as day...only one board with 3.0:)

I knew it was the UD7, Just looked it up on newegg to give a link Also its the left side john

Rudster816

johnksss

Rudster816

Its a Gigabyte board with a built in waterblock, Everyone should have known it was the UD7

http://www.newegg.com/Pro...x?Item=N82E16813128413

if that we're the case...you should have known by the usb 3.0 right on the side of the board instead of looking it up on newegg...rotflmao.


i just glanced at it from my phone, but once i brought it up. big as day...only one board with 3.0:)

I knew it was the UD7, Just looked it up on newegg to give a link Also its the left side john

 


now there you go...trying to out smart your self with an EPIC FAIL....rotflmao!
if that we're the case...you should have known by the usb 3.0 right on the side of the board instead of looking it up on newegg...rotflmao. <---that does not say the right side of the board


meaning: it's printed on the board

ya killing me.
 

johnksss

Rudster816

johnksss

Rudster816

Its a Gigabyte board with a built in waterblock, Everyone should have known it was the UD7

http://www.newegg.com/Pro...x?Item=N82E16813128413

if that we're the case...you should have known by the usb 3.0 right on the side of the board instead of looking it up on newegg...rotflmao.


i just glanced at it from my phone, but once i brought it up. big as day...only one board with 3.0:)

I knew it was the UD7, Just looked it up on newegg to give a link Also its the left side john

 


now there you go...trying to out smart your self with an EPIC FAIL....rotflmao!
if that we're the case...you should have known by the usb 3.0 right on the side of the board instead of looking it up on newegg...rotflmao. <---that does not say the right side of the board


meaning: it's printed on the board

ya killing me.
 

I is Dyslexic I on this blame that

Not the prettiest girl but she works. I wish I could get about 15 more degrees out of it. Im going to rig up some better fans for the top rad next week to see if that helps but the house fan I have blasting it now moves quite a bit of air. I mangled the fan that it came with not realizing the importance of it.

ya there is a fan on there you just cant see it in the pic its a huge house fan going to rig up a handfull of 120s tomorrow

Thanks for the welcome im pumping pure alcohol because it dosn,t freeze to easy but it gets thick and its dangerous if you get a leak ,But put that aside im putting dried ice in a tank with the alcohol then pumping it with three pumps into my waterblock very simple but effective for a long time.  I will post some more pics tonight on my project 

Poor man's "Liquid Nitrogen"

bigrelly

Thanks for the welcome im pumping pure alcohol because it dosn,t freeze to easy but it gets thick and its dangerous if you get a leak ,But put that aside im putting dried ice in a tank with the alcohol then pumping it with three pumps into my waterblock very simple but effective for a long time.  I will post some more pics tonight on my project 

Poor man's "Liquid Nitrogen"

You need a new temp setup. DICE only gets down to -78.5c, and that probe is reading -120c

Nice project nonetheless

What model pump are you using?

Also i have a 3 phase fridge unit witch will get it down to -70 but the glycol gets to thick then of cors it moves to slow so thats why i went pure alcohol then dropped the dried ice in to ,Cools my beer quick to lol..

A guy on XS has posted up some benchmark orientated versions of XP\W7

Here is the thread. Ill be using the XP\W7 this weekend. Ill be sure to post up how well they work

http://www.xtremesystems....howthread.php?t=246346