Sajin
https://www.mediafire.com...830/original9.rom/file

well, that idea was bad :) took some time to restore it. Black screen, artifacts etc

Sajin
lol. Well guess we are out of options here. Looks like you'll be stuck with the 7th one I edited or the original.

No worries. Thank you very much for your help! 7 is perfect enough

That's scary now 

https://www.mediafire.com/file/6cw39tz45eyk9wg/originalx2-1281.rom/file
 
This one will lock you to 135 MHz @ 1281mv hopefully.

Sajin
With the one you just recovered from I tried setting you to 1405 static at 1.268v, so if we can get the whole 1.281mv then maybe it will work.

for me original7 vbios is perfect. It's 72 C under full load in OC. The only issue with it is vdroop (or something else not sure). 1243v drops to 1224 in few seconds of load, and 1193 to 1174. So I have to adjust my OC parameters to 1224mv. If it can be fixed then it will be absolutely rockstar bios
 
https://gyazo.com/b8942b0cef0babeb678e636e4fc4d7fa
 
Not sure why Clim is so high, it was clocked 1400 for bench

thanks guys for the amazing support! I just edited my BIOS. Unluckily I can not share my files and photos right now, due the forum restrictions.
@Sajin, is possible to unlock the voltage over 1.30v? I will install a copper radiator with liquid metal, for push this baby a little bit more...
 
 
 
 

Sajin
Nope.

thanks in any case ;) I just adjusted the sliders at 1.350v and I gained something... temperatures are fine because I modded the back plate, waiting the frontal heatsink

Hello @ all,
 
sorry that i dig a death thread, but @Sajin what do you have mod at the bios to make 1.243 working on the 980ti?
 
With best regards,
techsolo12

Maxwell BIOS tweaker can read the BIOS file extracted from GPU-Z and then nvflash can be used to flash the modified BIOS back to the card.

I know, i just did it sometimes, but with a newer driver is it not possible to edit the voltage beyond 1.23V.
When i go over 1.23V the driver gives error 43.
But @Sajin have did it for a user and it worked with 2.43V without error.
His modded bios is not avaible to download at the moment.
 
With best regards,
techsolo12

He guys! Anyone can upload pls the Nemesis11 version again? 
thx a lot

i have a 980ti sc that is failing 3dmark benchmarks @ stock. I've noticed that when I increase the voltage from 100% to 105% in MSI Afterburner, it seems to fix the stability. Was there an issue with these cards to where they needed more voltage? If so, which bios do I want to run - will one of them posted in this thread fix the issue? Under full load, I am only seeing low 60's on temps when benchmarking. Never really ran into this type of issue before on a factory bios.