Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 20:24:28
(permalink)
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 20:48:36
(permalink)
Sajin
Going back to an older driver may allow you to use the 1281mv vbios.
No dice on 353. Now I can't even get it to recognize the 980Ti-SC-425 bios. Code 43 on everything.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 20:50:04
(permalink)
Sounds like it's time to flash the original.
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 20:59:05
(permalink)
Sajin
Sounds like it's time to flash the original.
Going back to original, then removing all drivers, then going back to the regular 980Ti-SC-425 at least got that back running. Still no luck on the 1281mv bios though :( I guess I'll have to settle for what I have.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:08:27
(permalink)
Jeff_G
I guess I'll have to settle for what I have.
Guess so.
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:26:17
(permalink)
Sajin
Jeff_G
I guess I'll have to settle for what I have.
Guess so.
Actually, since I can't leave well enough alone, I was looking at the old driver notes. The one you linked, 353.06, was a W7 update. 353.30 was the W10 update (at least from what I can tell). I tried it, and it seems to be working on the 1281mv bios. XOC opened up at a solid 1.274. Not sure why it was 1.274 instead of 1.281, but this will give me some room to push past 1600mhz now. *Update* Out of the blue, I got Code 43 while just reading something in Chrome. Closer I guess. *Update 2* I checked my driver, and I was back at 388. I went back to 353.30 again and all is good. Not sure what forced me back to 388 though.
post edited by Jeff_G - 2019/02/12 21:33:47
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:35:05
(permalink)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:37:40
(permalink)
If you keep having driver issues I would suggest ddu'ing your drivers.
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:39:25
(permalink)
Sajin
If you keep having driver issues I would suggest your drivers.
That's what I've been using in between each install, just to make sure. XOC is showing a strong 1.274mv with GPU core at 1641mhz right now, but it drops down to 1000mhz during benching. Not sure why, but I think I'm calling it for today. Tomorrow is another day, I will get this figured out!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:40:54
(permalink)
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:48:05
(permalink)
I take it back, I'm throttling due to power. Once it hits 300w, it downclocks fast. XOC is set to 121% power target, but it still throttles the instant it hits 300W. Should be an easy fix, just gotta figure out why the 980Ti-SC-425-1281mv isn't actually letting me get to 425w.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 21:52:26
(permalink)
Which exact video card do you have?
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 22:05:30
(permalink)
It's a Gigabyte 980 Ti G1 Gaming. Dual 8 pin power connectors. Running a full ekwb water block.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 22:07:40
(permalink)
I'm guessing you're using separate 8-pin power cables instead of a single cable that splits off into dual 6+2's?
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 22:09:28
(permalink)
Sajin
I'm guessing you're using separate 8-pin power cables instead of a single cable that splits off into dual 6+2's?
Correct. My psu (corsair 750w) has 4 individual 8pin cables.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 22:18:58
(permalink)
Set precision to 121% power then make a .bat file with the following command inside of it..
@ECHO
start cmd.exe /k "C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" -q -d power
Run the .bat file, and see if the enforced power limit is set to 425w.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/12 22:35:32
(permalink)
If the enforced power limit isn't set to 425w when precision is set to 121% you can simply set it to 425w with the following command...
@ECHO
start cmd.exe /k "C:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe" -pl 425
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/13 20:30:04
(permalink)
Still no luck going over 300w. I tried both of those commands, both state they changed power (first one to 423.5w, second one to 425w) but I still hit a limit at 300w.
If it helps, I took a screen shot of what everything looks like during the process:
It appears my photo did not work.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/13 20:31:09
(permalink)
Strange. Looks like the card may have some kinda built in limiter.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/13 20:34:39
(permalink)
Your picture did work. This is what I saw... 
|
Jeff_G
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2019/02/11 18:24:13
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/02/13 20:46:29
(permalink)
Okay, good. It showed up as an X on my end.
I'm gonna try a few more things yet tonight, but after a long day I may give up until tomorrow. I'm determined to figure this out now.
|
Subroza999
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2019/03/03 12:23:40
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/03/03 13:22:10
(permalink)
HI Guys , im new in BIOS modding and i have 72.1% asics , i have watercolling on card (evga 980ti sc acx ; 84.00.32.00.94) (PSU:corsair 750watts , i5 4690k 4.5ghz)
i have question my bios limit is 275W
i want to use Saijin 1420x profile it will fit for me? or it will be to much? and can you reupload please (and which drivers versions is best ?)
and have you guys any suggestions for me?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/03/03 13:53:13
(permalink)
Subroza999
HI Guys , im new in BIOS modding and i have 72.1% asics , i have watercolling on card (evga 980ti sc acx ; 84.00.32.00.94) (PSU:corsair 750watts , i5 4690k 4.5ghz)
i have question my bios limit is 275W
i want to use Saijin 1420x profile it will fit for me? or it will be to much? and can you reupload please (and which drivers versions is best ?)
and have you guys any suggestions for me?
1420x is still up. You'll need to use older drivers for the vbios to work. Try 353.30.
|
Subroza999
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2019/03/03 12:23:40
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/03/03 22:37:33
(permalink)
 Drivers do not support win 10 in discription ,that means i need to install win7? im now on 64win10 or it will anyway run? Btw thx!!! for youre answers here , in this topic , you make a great job
post edited by Subroza999 - 2019/03/03 22:40:45
Attached Image(s)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2019/03/04 00:57:11
(permalink)
Yes they should install anyway.
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re: GTX 980 TI BIOS/VOLTAGE HACK
2020/04/01 07:10:06
(permalink)
☄ Helpfulby XrayMan 2020/04/19 20:59:11
This is how you make the card work 
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|
uaolmer
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2020/04/23 15:13:03
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2020/05/19 10:35:34
(permalink)
I have evga 980 ti ACX 2.0 - simple, not sc, no backplate.
I installed 1.281 modded bios, tested it and played The Witcher 3 at 1.460-1.470mhz 2050 memory. It's pretty hot 80C 1.29% W. Still, when I played metro exodus it crashed and had to lower it down a bit. Thanks for this opportunity anyways.
It works only with old driver 353 and it seems like the newer drivers have better fps. Is there a way to use newer drivers as I also need g-sync. Newer drivers give me 43 error. I think 364.96 was also working. Thank you
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2020/05/19 14:27:24
(permalink)
uaolmer
Is there a way to use newer drivers as I also need g-sync.
Nope. If you want 1.281mv you'll need to use older drivers.
|
uaolmer
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2020/04/23 15:13:03
- Status: offline
- Ribbons : 0
Re: GTX 980 TI BIOS/VOLTAGE HACK
2020/05/19 14:43:14
(permalink)
Sajin
Nope. If you want 1.281mv you'll need to use older drivers.
I've noticed that I can OC it to 1.243 without bios mod and it can make it past 1400mhz, probably ~1420-1440. Though it requires some tests as I can add only 110%W. The only problem with that is vdroop I guess as the voltage goes quickly down when the card is above 70C and it crashes, though it maybe the lack of power. Well, I think the most perfect solution would be to keep it as is at 1.224-1.243mv but to remove all these problems somehow by vbios alteration. Because with latest driver fps seems to be higher or the same with less clock boost. And the GPU would be less hot and G-Sync would be supported with latest driver. I'm totally new to this but please let me know if it's possible
post edited by uaolmer - 2020/05/19 14:54:24
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: GTX 980 TI BIOS/VOLTAGE HACK
2020/05/19 15:16:53
(permalink)
I could modify the version 1 vbios listed at the beginning of this thread down to 1.243mv, but I don't know if it will work with newer drivers or not.
|