EVGA

FAH GPU Tracker V2

Page: < 12345.. > >> Showing page 3 of 27
Author
Barbarossa
CLASSIFIED ULTRA Member
  • Total Posts : 5319
  • Reward points : 0
  • Joined: 2008/01/28 11:43:24
  • Status: offline
  • Ribbons : 25
Re:FAH GPU Tracker V2 2010/04/28 22:37:52 (permalink)
So far the estimate is just below 4 days

http://sites.google.com/s..evgachimpchallenge/home

of course it all depends on who really shows up on the starting line

 
     My affiliate code
 
#61
AlexisRO
FTW Member
  • Total Posts : 1923
  • Reward points : 0
  • Joined: 2008/12/22 09:28:18
  • Location: Bucharest Romania
  • Status: offline
  • Ribbons : 9
Re:FAH GPU Tracker V2 2010/04/28 23:13:17 (permalink)
farinhir

AlexisRO

jedi95

This is the same install.bat used for the standard SMP client. How to:

1.Basically when it comes up the first step is to enter the account name of an admin account on your system (if you are and admin just hit enter to accept the current account name)
2.Once you have done that, you will have to enter the password to the account you specified in the first step twice (it will not show anything being entered, this is normal).
3. If you completed the first 2 steps correctly you should see "If you see this twice, MPI is working" 2 times.


If i don't have a password to my account, what should i type in? I tried leaving it blank but it gave me an error.

User password is required for the windows SMP client to work. The easiest thing (if you are on windows seven at least) is to create a password for your login. Then press "windows key+r" to open a run dialog. Type "control userpasswords2". Untick the "users must enter a user name and password to use this computer" option. It will then have you select a user to log in automatically. Choose the one you want to fold with and enter the password you chose. It should now login automatically. This will bypass the annoying login screen, while allowing you to SMP fold. 


As for the sticky mentioned by taniquetil, I have not found it. Can anyone point me to it so that I can verify what it says myself?


Thank you! That did the trick and my CPU is folding also.


Also big thanks to jedi95 for all your work!

System: 7820X - MSI X299 Carbon AC - G.Skill 32Gb TridentZ 3200 - EVGA 1080 Ti - 500 Gb Samsung 970 EVO , 2Tb Crucial MX500, 2Tb, 3Tb, 4Tb Seagate - Seasonic 1000W Prime - Creative Sound Blaster Z - Windows 10 Pro 64 - Phanteks Enthoo Primo - Edifier S530D - Acer Predator XB271HU (1440p)

Watercooling loop: Heatkiller CPU - EK 1080 Ti - Swiftech MCP 655 with EK X-Top v2 - XSPC reservoir - Alphacool 480 x2
 
   
 
#62
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/04/28 23:54:18 (permalink)
farinhir
As for CC, I just looked at the goal. I think we will only be running CC for a day or so, so I am all out. I thought it was going to be much longer than 2 to 5 days. So all I have to do (now that I have signed up on the other thread) is have "automatically fold for EVGA during CC" ticked and I will be fine right?


That will work, but you won't get bonus points for the A3 WUs because the automatic option does not apply the passkey. If you want to get bonus points for those WUs you have to disable the auto CC option and manually enter the name/team/passkey. This was done for security reasons as the passkey must be kept away from other teams. It is possible for me to change this in the middle of the challenge, but I will leave that decision up to the ones organizing the team.
 
farinhir
Also, the CPU folding, is it bigadv or something? I am only on an e8400@3.73Ghz. I tried to do SMP folding with 2 cores only to have it sit there for 40 or so minutes without even advancing once (might have been 30). The WU was an A3 with around 1300 PPD IIRC. Is it possible for me to run that with only -advmethods flagged, not bigadv. Might be nice for us to be able to set command line switches for each client. Just a thought. You can choose whether to make then tick boxes or command line fields. You might even pull them from an xml file. Just my 2c.


By default, the SMP client will run on all cores using -advmethods in order to receive A3 WUs. Since I see no reason not to run the A3 WUs over the A1s, I didn't add any option to the GUI to remove this. If you want to manually remove it you can edit the client.cfg file in the SMP client folder.

As for switching the flags on clients, I have added an option to set the -forcegpu flag from the GUI to the next version. I am not sure I can get the next version out before the CC because school will be consuming a lot of my time starting next week.

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#63
farinhir
Superclocked Member
  • Total Posts : 229
  • Reward points : 0
  • Joined: 2009/06/22 03:17:19
  • Status: offline
  • Ribbons : 1
Re:FAH GPU Tracker V2 2010/04/29 00:13:17 (permalink)
Odd. I should be able to run -advmethods fine (just a little slower than on VMware with my understanding). Oh well. I will see what an overnight run gives. Thanks for all your efforts. Please note that my suggestions are not a criticism of your work, but more my wishes (and perhaps some confusion as to why SMP was running slow on my system). 

Keep up the good work, and good luck with school.



#64
spenza
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2010/02/04 22:09:01
  • Status: offline
  • Ribbons : 0
Re:FAH GPU Tracker V2 2010/05/02 17:47:38 (permalink)
I've been running FAH GPU Tracker V2 on a machine running Win 7 for a couple days now and it's working great.

I have another machine running WHS I'd like to use it on as well. The client status says "Running" but it never actually starts a WU. Any ideas?


#65
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/02 18:07:03 (permalink)
spenza

I've been running FAH GPU Tracker V2 on a machine running Win 7 for a couple days now and it's working great.

I have another machine running WHS I'd like to use it on as well. The client status says "Running" but it never actually starts a WU. Any ideas?


Ok, there are a few things that I will need to find the problem:

1. What OS is the system running?
2. What client(s) are giving you this issue? (CPU, SMP, GPU, ect)
3. The LOG.txt file located in the root Tracker directory (make sure on the last Tracker run you tried to start one of the client(s) that were giving you trouble)
4. The FAHlog.txt from at least one client that is having this problem (if there is no FAHlog.txt in the client folder, then just make sure you post that this is the case)
5. Try starting one of the problem client(s) without any other clients running and check the task manager processes tab. List all processes that start with FAH (examples, FAH.exe, FAH_GPU.exe, ect) Make sure you also indicate which client you did this with.

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#66
spenza
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2010/02/04 22:09:01
  • Status: offline
  • Ribbons : 0
Re:FAH GPU Tracker V2 2010/05/02 18:52:59 (permalink)
1. What OS is the system running?

Windows Home Server (SP2)

2. What client(s) are giving you this issue? (CPU, SMP, GPU, ect)

CPU and SMP. The video card can't fold.

3. The LOG.txt file located in the root Tracker directory (make sure on the last Tracker run you tried to start one of the client(s) that were giving you trouble)

LOG

4. The FAHlog.txt from at least one client that is having this problem (if there is no FAHlog.txt in the client folder, then just make sure you post that this is the case)

CPU folder contained a empty log file. SMP folder didn't contain a log file until I manually executed FAH.exe in that folder (for #5 below)

5. Try starting one of the problem client(s) without any other clients running and check the task manager processes tab. List all processes that start with FAH (examples, FAH.exe, FAH_GPU.exe, ect) Make sure you also indicate which client you did this with.

Ran SMP\FAH.exe
- FAH.exe
- FahCore_a3.exe
Command window indicates WU is being processed...

Ran SMP\FAH_SMP.exe
- FAH.exe
- FAH_SMP.exe
- FahCore_a3.exe
Command window indicates WU is being processed...

Ran CPU\FAH.exe
- FAH.exe
- FahCore_b4.exe
Command window indicates WU is being processed...

Ran CPU\FAH_CPU.exe
- FAH.exe
- FAH_CPU.exe
- FahCore_b4.exe
Command window indicates WU is being processed...

When I run SMP in tracker...
- FAH GPU Tracker v2.exe
- FAH.exe
- FAH_SMP.exe
No core, no log file created...


#67
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/02 19:24:58 (permalink)
spenza

1. What OS is the system running?

Windows Home Server (SP2)

2. What client(s) are giving you this issue? (CPU, SMP, GPU, ect)

CPU and SMP. The video card can't fold.

3. The LOG.txt file located in the root Tracker directory (make sure on the last Tracker run you tried to start one of the client(s) that were giving you trouble)

LOG

4. The FAHlog.txt from at least one client that is having this problem (if there is no FAHlog.txt in the client folder, then just make sure you post that this is the case)

CPU folder contained a empty log file. SMP folder didn't contain a log file until I manually executed FAH.exe in that folder (for #5 below)

5. Try starting one of the problem client(s) without any other clients running and check the task manager processes tab. List all processes that start with FAH (examples, FAH.exe, FAH_GPU.exe, ect) Make sure you also indicate which client you did this with.

Ran SMP\FAH.exe
- FAH.exe
- FahCore_a3.exe
Command window indicates WU is being processed...

Ran SMP\FAH_SMP.exe
- FAH.exe
- FAH_SMP.exe
- FahCore_a3.exe
Command window indicates WU is being processed...

Ran CPU\FAH.exe
- FAH.exe
- FahCore_b4.exe
Command window indicates WU is being processed...

Ran CPU\FAH_CPU.exe
- FAH.exe
- FAH_CPU.exe
- FahCore_b4.exe
Command window indicates WU is being processed...

When I run SMP in tracker...
- FAH GPU Tracker v2.exe
- FAH.exe
- FAH_SMP.exe
No core, no log file created...


That's rather odd. The Tracker seems like it is starting the client program, but the client is not starting correctly. This is probably an issue with the container program (FAH_SMP.exe and FAH_CPU.exe are the container programs, FAH.exe is the actual CPU or SMP client) that allows the clients to run hidden. Right now, if I run the clients hidden without the container there is no way to close them properly. (This can cause loss of work among other problems) I honestly don't know how to fix this as it may be OS-specific and I have no way to test under Windows Home Server SP2.

I have been working on a different method of running clients hidden that does not require container programs. This may fix your issue, but I have no idea when I will have this done. It is not likely this change will make it into version 2.7.
post edited by jedi95 - 2010/05/02 19:28:40

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#68
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/02 22:50:39 (permalink)
For those of you that have the CC option enabled, I intend to switch the Tracker over to EVGApes sometime on the 4th. Since the longest WUs that will be running are A3s, I figure 24 hours should be enough.

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#69
Pixeldream
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2010/05/03 23:07:33
  • Status: offline
  • Ribbons : 0
Re:FAH GPU Tracker V2 2010/05/03 23:29:40 (permalink)
Thanks for making this program! Unfortunately I'm also unable to get a work unit, the icon in the tray shows SMP running but task manager is showing the processor at idle. I installed your program last night, originally I put it in my D:\Home\Documents folder. It started a WU but I then shut it down and moved it to my C:\Program Files folder (thought that would have been a better place for it). Now it's not working! I'm running Vista Home Premium SP2 32 bit. Triying to run the SMP client.
Log.txt file:
[22:19:30] --------------------------------------------------
[22:19:30] FAH GPU Tracker v2.6 Startup
[22:19:30] --------------------------------------------------
[22:20:09] --------------------------------------------------
[22:20:09] FAH GPU Tracker v2.6 Startup
[22:20:09] --------------------------------------------------
[22:23:17] --------------------------------------------------
[22:23:17] FAH GPU Tracker v2.6 Startup
[22:23:17] --------------------------------------------------
[22:25:41] Applied new config settings
[22:26:11] Applied new config settings
[22:26:15] Applied new config settings
[22:26:15] Applied new config settings
[22:26:15] Applied new config settings
[22:26:15] Applied new config settings
[22:30:04] --------------------------------------------------
[22:30:04] FAH GPU Tracker v2.6 Startup
[22:30:04] --------------------------------------------------
[22:30:05] Starting SMP
[22:30:05] Started new WU on SMP
[22:31:58] Stopped SMP


Fahlog:


--- Opening Log file [May 3 10:30:11 UTC]


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Home\Documents\FAH GPU Tracker V2\SMP
Executable: D:\Home\Documents\FAH GPU Tracker V2\SMP\FAH.exe
Arguments: -smp -forceasm -oneunit

[10:30:11] - Ask before connecting: No
[10:30:11] - User name:
[10:30:11] - User ID:
[10:30:11] - Machine ID: 2
[10:30:11]
[10:30:11] Work directory not found. Creating...
[10:30:11] Could not open work queue, generating new queue...
[10:30:11] - Preparing to get new work unit...
[10:30:11] Cleaning up work directory
[10:30:11] + Attempting to get work packet
[10:30:11] Passkey found
[10:30:11] - Connecting to assignment server
[10:30:12] - Successful: assigned to (171.64.65.54).
[10:30:12] + News From Folding@Home: Welcome to Folding@Home
[10:30:12] Loaded queue successfully.
[10:30:20] + Closed connections
[10:30:20]
[10:30:20] + Processing work unit
[10:30:20] Core required: FahCore_a3.exe
[10:30:20] Core not found.
[10:30:20] - Core is not present or corrupted.
[10:30:20] - Attempting to download new core...
[10:30:20] + Downloading new core: FahCore_a3.exe
[10:30:21] + 10240 bytes downloaded
[10:30:21] + 20480 bytes downloaded
[10:30:21] + 30720 bytes downloaded
[10:30:21] + 40960 bytes downloaded
[10:30:21] + 51200 bytes downloaded
[10:30:22] + 61440 bytes downloaded
[10:30:22] + 71680 bytes downloaded
[10:30:22] + 81920 bytes downloaded
[10:30:22] + 92160 bytes downloaded
[10:30:22] + 102400 bytes downloaded
[10:30:22] + 112640 bytes downloaded
[10:30:23] + 122880 bytes downloaded
[10:30:23] + 133120 bytes downloaded
[10:30:23] + 143360 bytes downloaded
[10:30:23] + 153600 bytes downloaded
[10:30:23] + 163840 bytes downloaded
[10:30:23] + 174080 bytes downloaded
[10:30:23] + 184320 bytes downloaded
[10:30:23] + 194560 bytes downloaded
[10:30:23] + 204800 bytes downloaded
[10:30:23] + 215040 bytes downloaded
[10:30:23] + 225280 bytes downloaded
[10:30:23] + 235520 bytes downloaded
[10:30:24] + 245760 bytes downloaded
[10:30:24] + 256000 bytes downloaded
[10:30:24] + 266240 bytes downloaded
[10:30:24] + 276480 bytes downloaded
[10:30:24] + 286720 bytes downloaded
[10:30:24] + 296960 bytes downloaded
[10:30:24] + 307200 bytes downloaded
[10:30:24] + 317440 bytes downloaded
[10:30:24] + 327680 bytes downloaded
[10:30:24] + 337920 bytes downloaded
[10:30:24] + 348160 bytes downloaded
[10:30:24] + 358400 bytes downloaded
[10:30:24] + 368640 bytes downloaded
[10:30:24] + 378880 bytes downloaded
[10:30:24] + 389120 bytes downloaded
[10:30:24] + 399360 bytes downloaded
[10:30:24] + 409600 bytes downloaded
[10:30:24] + 419840 bytes downloaded
[10:30:24] + 430080 bytes downloaded
[10:30:24] + 440320 bytes downloaded
[10:30:25] + 450560 bytes downloaded
[10:30:25] + 460800 bytes downloaded
[10:30:25] + 471040 bytes downloaded
[10:30:25] + 481280 bytes downloaded
[10:30:25] + 491520 bytes downloaded
[10:30:25] + 501760 bytes downloaded
[10:30:25] + 512000 bytes downloaded
[10:30:25] + 522240 bytes downloaded
[10:30:25] + 532480 bytes downloaded
[10:30:25] + 542720 bytes downloaded
[10:30:25] + 552960 bytes downloaded
[10:30:25] + 563200 bytes downloaded
[10:30:25] + 573440 bytes downloaded
[10:30:25] + 583680 bytes downloaded
[10:30:25] + 593920 bytes downloaded
[10:30:25] + 604160 bytes downloaded
[10:30:25] + 614400 bytes downloaded
[10:30:25] + 624640 bytes downloaded
[10:30:25] + 634880 bytes downloaded
[10:30:25] + 645120 bytes downloaded
[10:30:25] + 655360 bytes downloaded
[10:30:26] + 665600 bytes downloaded
[10:30:26] + 675840 bytes downloaded
[10:30:26] + 686080 bytes downloaded
[10:30:26] + 696320 bytes downloaded
[10:30:26] + 706560 bytes downloaded
[10:30:26] + 716800 bytes downloaded
[10:30:26] + 727040 bytes downloaded
[10:30:26] + 737280 bytes downloaded
[10:30:26] + 747520 bytes downloaded
[10:30:26] + 757760 bytes downloaded
[10:30:26] + 768000 bytes downloaded
[10:30:26] + 778240 bytes downloaded
[10:30:26] + 788480 bytes downloaded
[10:30:26] + 798720 bytes downloaded
[10:30:26] + 808960 bytes downloaded
[10:30:26] + 819200 bytes downloaded
[10:30:26] + 829440 bytes downloaded
[10:30:26] + 839680 bytes downloaded
[10:30:26] + 849920 bytes downloaded
[10:30:26] + 860160 bytes downloaded
[10:30:26] + 870400 bytes downloaded
[10:30:27] + 880640 bytes downloaded
[10:30:27] + 890880 bytes downloaded
[10:30:27] + 901120 bytes downloaded
[10:30:27] + 911360 bytes downloaded
[10:30:27] + 921600 bytes downloaded
[10:30:27] + 931840 bytes downloaded
[10:30:27] + 942080 bytes downloaded
[10:30:27] + 952320 bytes downloaded
[10:30:27] + 962560 bytes downloaded
[10:30:27] + 972800 bytes downloaded
[10:30:27] + 983040 bytes downloaded
[10:30:27] + 993280 bytes downloaded
[10:30:27] + 1003520 bytes downloaded
[10:30:27] + 1013760 bytes downloaded
[10:30:27] + 1024000 bytes downloaded
[10:30:27] + 1034240 bytes downloaded
[10:30:27] + 1044480 bytes downloaded
[10:30:27] + 1054720 bytes downloaded
[10:30:27] + 1064960 bytes downloaded
[10:30:27] + 1075200 bytes downloaded
[10:30:28] + 1085440 bytes downloaded
[10:30:28] + 1095680 bytes downloaded
[10:30:28] + 1105920 bytes downloaded
[10:30:28] + 1116160 bytes downloaded
[10:30:28] + 1126400 bytes downloaded
[10:30:28] + 1136640 bytes downloaded
[10:30:28] + 1146880 bytes downloaded
[10:30:28] + 1157120 bytes downloaded
[10:30:28] + 1167360 bytes downloaded
[10:30:28] + 1177600 bytes downloaded
[10:30:28] + 1187840 bytes downloaded
[10:30:28] + 1198080 bytes downloaded
[10:30:28] + 1208320 bytes downloaded
[10:30:28] + 1218560 bytes downloaded
[10:30:28] + 1228800 bytes downloaded
[10:30:28] + 1239040 bytes downloaded
[10:30:28] + 1249280 bytes downloaded
[10:30:28] + 1259520 bytes downloaded
[10:30:28] + 1269760 bytes downloaded
[10:30:28] + 1280000 bytes downloaded
[10:30:28] + 1290240 bytes downloaded
[10:30:28] + 1300480 bytes downloaded
[10:30:28] + 1310720 bytes downloaded
[10:30:28] + 1320960 bytes downloaded
[10:30:28] + 1331200 bytes downloaded
[10:30:29] + 1341440 bytes downloaded
[10:30:29] + 1351680 bytes downloaded
[10:30:29] + 1361920 bytes downloaded
[10:30:29] + 1372160 bytes downloaded
[10:30:29] + 1382400 bytes downloaded
[10:30:29] + 1392640 bytes downloaded
[10:30:29] + 1402880 bytes downloaded
[10:30:29] + 1413120 bytes downloaded
[10:30:29] + 1423360 bytes downloaded
[10:30:29] + 1433600 bytes downloaded
[10:30:29] + 1443840 bytes downloaded
[10:30:29] + 1454080 bytes downloaded
[10:30:29] + 1464320 bytes downloaded
[10:30:29] + 1474560 bytes downloaded
[10:30:29] + 1484800 bytes downloaded
[10:30:29] + 1495040 bytes downloaded
[10:30:29] + 1505280 bytes downloaded
[10:30:29] + 1515520 bytes downloaded
[10:30:29] + 1525760 bytes downloaded
[10:30:29] + 1536000 bytes downloaded
[10:30:29] + 1546240 bytes downloaded
[10:30:29] + 1556480 bytes downloaded
[10:30:30] + 1566720 bytes downloaded
[10:30:30] + 1576960 bytes downloaded
[10:30:30] + 1587200 bytes downloaded
[10:30:30] + 1597440 bytes downloaded
[10:30:30] + 1607680 bytes downloaded
[10:30:30] + 1617920 bytes downloaded
[10:30:30] + 1628160 bytes downloaded
[10:30:30] + 1638400 bytes downloaded
[10:30:30] + 1648640 bytes downloaded
[10:30:30] + 1658880 bytes downloaded
[10:30:30] + 1669120 bytes downloaded
[10:30:30] + 1679360 bytes downloaded
[10:30:30] + 1689600 bytes downloaded
[10:30:30] + 1699840 bytes downloaded
[10:30:32] + 1710080 bytes downloaded
[10:30:32] + 1720320 bytes downloaded
[10:30:32] + 1730560 bytes downloaded
[10:30:32] + 1740800 bytes downloaded
[10:30:32] + 1751040 bytes downloaded
[10:30:32] + 1761280 bytes downloaded
[10:30:32] + 1771520 bytes downloaded
[10:30:33] + 1781760 bytes downloaded
[10:30:33] + 1792000 bytes downloaded
[10:30:33] + 1802240 bytes downloaded
[10:30:33] + 1812480 bytes downloaded
[10:30:33] + 1822720 bytes downloaded
[10:30:34] + 1832960 bytes downloaded
[10:30:34] + 1843200 bytes downloaded
[10:30:34] + 1853440 bytes downloaded
[10:30:34] + 1863680 bytes downloaded
[10:30:34] + 1873920 bytes downloaded
[10:30:34] + 1884160 bytes downloaded
[10:30:35] + 1894400 bytes downloaded
[10:30:35] + 1904640 bytes downloaded
[10:30:35] + 1914880 bytes downloaded
[10:30:35] + 1925120 bytes downloaded
[10:30:35] + 1935360 bytes downloaded
[10:30:35] + 1945600 bytes downloaded
[10:30:35] + 1955840 bytes downloaded
[10:30:35] + 1966080 bytes downloaded
[10:30:35] + 1976320 bytes downloaded
[10:30:35] + 1986560 bytes downloaded
[10:30:35] + 1996800 bytes downloaded
[10:30:35] + 2007040 bytes downloaded
[10:30:35] + 2017280 bytes downloaded
[10:30:36] + 2027520 bytes downloaded
[10:30:36] + 2037760 bytes downloaded
[10:30:36] + 2048000 bytes downloaded
[10:30:36] + 2058240 bytes downloaded
[10:30:36] + 2068480 bytes downloaded
[10:30:36] + 2078720 bytes downloaded
[10:30:36] + 2088960 bytes downloaded
[10:30:36] + 2099200 bytes downloaded
[10:30:36] + 2109440 bytes downloaded
[10:30:36] + 2119680 bytes downloaded
[10:30:36] + 2129920 bytes downloaded
[10:30:36] + 2140160 bytes downloaded
[10:30:36] + 2150400 bytes downloaded
[10:30:36] + 2160640 bytes downloaded
[10:30:36] + 2170880 bytes downloaded
[10:30:36] + 2181120 bytes downloaded
[10:30:36] + 2191360 bytes downloaded
[10:30:36] + 2201600 bytes downloaded
[10:30:36] + 2211840 bytes downloaded
[10:30:36] + 2222080 bytes downloaded
[10:30:37] + 2232320 bytes downloaded
[10:30:37] + 2242560 bytes downloaded
[10:30:37] + 2252800 bytes downloaded
[10:30:37] + 2263040 bytes downloaded
[10:30:37] + 2273280 bytes downloaded
[10:30:37] + 2283520 bytes downloaded
[10:30:37] + 2293760 bytes downloaded
[10:30:37] + 2304000 bytes downloaded
[10:30:37] + 2314240 bytes downloaded
[10:30:37] + 2324480 bytes downloaded
[10:30:37] + 2334720 bytes downloaded
[10:30:37] + 2340489 bytes downloaded
[10:30:37] Verifying core Core_a3.fah...
[10:30:37] Signature is VALID
[10:30:37]
[10:30:37] Trying to unzip core FahCore_a3.exe
[10:30:38] Decompressed FahCore_a3.exe (8087552 bytes) successfully
[10:30:43] + Core successfully engaged
[10:30:48]
[10:30:48] + Processing work unit
[10:30:48] Core required: FahCore_a3.exe
[10:30:48] Core found.
[10:30:48] Working on queue slot 01 [May 3 10:30:48 UTC]
[10:30:48] + Working ...
[10:30:48]
[10:30:48] *------------------------------*
[10:30:48] Folding@Home Gromacs SMP Core
[10:30:48] Version 2.17 (Mar 12, 2010)
[10:30:48]
[10:30:48] Preparing to commence simulation
[10:30:48] - Assembly optimizations manually forced on.
[10:30:48] - Not checking prior termination.
[10:30:49] - Expanded 1766649 -> 2254429 (decompressed 127.6 percent)
[10:30:49] Called DecompressByteArray: compressed_data_size=1766649 data_size=2254429, decompressed_data_size=2254429 diff=0
[10:30:49] - Digital signature verified
[10:30:49]
[10:30:49] Project: 6059 (Run 0, Clone 36, Gen 20)
[10:30:49]
[10:30:49] Assembly optimizations on if available.
[10:30:49] Entering M.D.
[10:30:55] Completed 0 out of 500000 steps  (0%)

Folding@Home Client Shutdown at user request.

Folding@Home Client Shutdown.


(I removed my user name and ID)

The FAH processes running are FAH GPU Tracker V2.exe, FAH.exe, FAH_SMP.exe and FahCore_a3.exe (this last one flashes on and off in Task Manager)

Could the problem be because I moved it? Very sorry for the length of this post. I really do want to contribute to this great cause though. Thanks in advance!
#70
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/03 23:50:15 (permalink)
Pixeldream

Thanks for making this program! Unfortunately I'm also unable to get a work unit, the icon in the tray shows SMP running but task manager is showing the processor at idle. I installed your program last night, originally I put it in my D:\Home\Documents folder. It started a WU but I then shut it down and moved it to my C:\Program Files folder (thought that would have been a better place for it). Now it's not working! I'm running Vista Home Premium SP2 32 bit. Triying to run the SMP client.
Log.txt file:

<removed for length>


The FAH processes running are FAH GPU Tracker V2.exe, FAH.exe, FAH_SMP.exe and FahCore_a3.exe (this last one flashes on and off in Task Manager)

Could the problem be because I moved it? Very sorry for the length of this post. I really do want to contribute to this great cause though. Thanks in advance!


Did you run install.bat in the SMP client folder again after moving the Tracker folder? If not, then this is the obvious problem. If you did run install.bat after moving it I recommend you go to Client -> SMP -> Delete WU, then delete all the FahCore files in the SMP folder. You should be able to start a new WU after that.

Hopefully this solves your problem.



Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#71
Pixeldream
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2010/05/03 23:07:33
  • Status: offline
  • Ribbons : 0
Re:FAH GPU Tracker V2 2010/05/04 00:37:45 (permalink)
I just ran install.bat again (about 20mins ago). I left it for about 10mins and nothing seemed to be happening so I followed your other suggestion to delete the WU and fah_core file. Unfortunately it's still not running. Would it be an idea to remove the tracker and re-install it? How exactly would I do that? Appreciate your patience and help! : )
#72
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/04 05:28:40 (permalink)
Pixeldream

I just ran install.bat again (about 20mins ago). I left it for about 10mins and nothing seemed to be happening so I followed your other suggestion to delete the WU and fah_core file. Unfortunately it's still not running. Would it be an idea to remove the tracker and re-install it? How exactly would I do that? Appreciate your patience and help! : )


To re-install the Tracker simply delete the entire folder and download/extract it again.

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#73
glmurphy
Superclocked Member
  • Total Posts : 205
  • Reward points : 0
  • Joined: 2009/07/21 09:27:52
  • Location: Arlington, TX
  • Status: offline
  • Ribbons : 7
Re:FAH GPU Tracker V2 2010/05/04 12:33:20 (permalink)
Love this program. Worked flawlessly for setting up 2 of my computers!

Corsair Obsidian 500D - - Gigabyte Z370 AORUS Gaming 7 - - i7-8700K - - Corsair AX1200i PSU
32GB Corsair Vengeance LED 3000Mhz (4x8GB) - - EVGA GTX 1080 Ti SC2
2 x Samsung 960 EVO M.2 - - 2 x Samsung 860 EVO SSD
 
Black and Blue 800D
QuakeCon 800D
Toxic Envi
BAWLS
Glorious PCMR
Monolithic 500D

[link=http://folding.extremeoverclocking.com/user_summary.php?s=&u=512282][image]http://
#74
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/04 14:16:22 (permalink)
I have just enabled the CC mode for the Tracker. For those who have the CC option enabled in the settings the Tracker will switch all clients over to EVGApes starting with the next WU.

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#75
taniquetil
FTW Member
  • Total Posts : 1494
  • Reward points : 0
  • Joined: 2009/05/20 11:17:01
  • Status: offline
  • Ribbons : 5
Re:FAH GPU Tracker V2 2010/05/04 21:18:13 (permalink)
Jedi95:

I think I found a bug in your client, but I'm not sure if it's just me.

I can't get Oneunit mode to work properly. When I set the -Oneunit flag for one of my GPUs, it will still grab work after it's finished the current unit.

Don't know if this issue is covered in the latest release.

Also, why isn't this tool Stickied, mods?




System Specs:

Chassis: Antec 1200
Mobo: EVGA x58 FTW3
CPU: i7 950 @ 3.9GHZ
CPU Cooler: Cooler Master V8
GPU: EVGA GTX470 @ 760/1520/1720
Folding GPU: EVGA 9800GT @ 700/1744/950
RAM: 3x2GB Patriot Sector 7
PSU: Corsair 750TX
Creative Sound Blaster...The One Everybody Has
#76
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/04 22:45:34 (permalink)
taniquetil

Jedi95:

I think I found a bug in your client, but I'm not sure if it's just me.

I can't get Oneunit mode to work properly. When I set the -Oneunit flag for one of my GPUs, it will still grab work after it's finished the current unit.

Don't know if this issue is covered in the latest release.

Also, why isn't this tool Stickied, mods?


Are you trying to set the -oneunit flag on the clients manually in the client.cfg files? If so, you need to use the oneunit option on the config page instead. The Tracker runs all clients with the -oneunit flag in order to know when they are done with a WU. The oneunit option in the config page simply tells the Tracker not to restart the client when it exits after completing a WU.
post edited by jedi95 - 2010/05/04 22:46:41

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#77
EVGA_Psylacus
Field Sales Engineer
  • Total Posts : 119
  • Reward points : 0
  • Joined: 2008/08/27 15:33:01
  • Status: offline
  • Ribbons : 1
Re:FAH GPU Tracker V2 2010/05/05 07:52:12 (permalink)
I got the graphics cards to fold great using this program.
I had my folding smp working well with the stand alone app... however I just wanted to use this because it all in one and simple


However, I can't get the cpu to fold. I ran the intall.bat in the folder but it still won't work? Do I need uninstal my old folder where i had it installed?

My Rig
New X79 Rig INCOMINNGGGGGGGGGG
#78
EVGA_Psylacus
Field Sales Engineer
  • Total Posts : 119
  • Reward points : 0
  • Joined: 2008/08/27 15:33:01
  • Status: offline
  • Ribbons : 1
Re:FAH GPU Tracker V2 2010/05/05 07:53:21 (permalink)
Never mind seems I got it working, however will it always say unknown?
Or as it runs will the points show up?

My Rig
New X79 Rig INCOMINNGGGGGGGGGG
#79
Davabled
FTW Member
  • Total Posts : 1755
  • Reward points : 0
  • Joined: 2003/10/09 00:50:04
  • Location: Michigan
  • Status: offline
  • Ribbons : 44
Re:FAH GPU Tracker V2 2010/05/05 11:16:12 (permalink)
sylacus

Never mind seems I got it working, however will it always say unknown?
Or as it runs will the points show up?


Try clicking on "Setup" then "Download Projects List", that should take care of the unknowns.
#80
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/05 15:02:39 (permalink)
I have released version 2.61 BETA as a quick bugfix. It fixes an issue where changing the name/team/passkey while clients are running results in those clients not updating to the new settings. Restarting the Tracker would fix this problem. Also note that this issue does not affect the XML config mode or the auto CC config mode.

This will be the first update using the new updater code in 2.6. Please report any problems with this update ASAP so that we don't lose EVGApes PPD.

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#81
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/08 16:43:03 (permalink)
I just disabled the CC 2010 mode, all clients should resume folding under the original config info on the next WU. Thanks to all that folded in the CC.

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#82
staypuft
CLASSIFIED Member
  • Total Posts : 3844
  • Reward points : 0
  • Joined: 2006/03/11 14:04:03
  • Location: USA
  • Status: online
  • Ribbons : 26
Re:FAH GPU Tracker V2 2010/05/09 10:01:41 (permalink)
Will give this a try, thx!

Interested in a discount on EVGA products?
Click here for details and enter my Associates code at checkout >> 2ILPLQQ8IWY8DPN
 
2021 Build: Gigabyte Z590 Ultra | Core i7-10700K | be quiet! Dark Rock Pro 4 | 32GB G.Skill Trident Z DDR4-3200
EVGA RTX 3080 FTW3 Ultra | Samsung 970 EVO 500GB | Seasonic Focus GX-850 | Fractal Design Meshify C
#83
EVGA_Psylacus
Field Sales Engineer
  • Total Posts : 119
  • Reward points : 0
  • Joined: 2008/08/27 15:33:01
  • Status: offline
  • Ribbons : 1
Re:FAH GPU Tracker V2 2010/05/11 04:29:34 (permalink)
Somehow after I had a net outage I can't get my smp to work correctly. It won't max out my cores, i tried re running the dat instal file and still nothing.

My Rig
New X79 Rig INCOMINNGGGGGGGGGG
#84
Barbarossa
CLASSIFIED ULTRA Member
  • Total Posts : 5319
  • Reward points : 0
  • Joined: 2008/01/28 11:43:24
  • Status: offline
  • Ribbons : 25
Re:FAH GPU Tracker V2 2010/05/11 04:34:28 (permalink)
You may have done nothing wrong.
Have a look in here if the situation applies to you as well
http://forums.evga.com/tm.aspx?m=360268
http://forums.evga.com/tm.aspx?m=360290

 
     My affiliate code
 
#85
Davabled
FTW Member
  • Total Posts : 1755
  • Reward points : 0
  • Joined: 2003/10/09 00:50:04
  • Location: Michigan
  • Status: offline
  • Ribbons : 44
Re:FAH GPU Tracker V2 2010/05/11 12:14:26 (permalink)
Feature Request:
Would it be possible to setup an option to turn GPU folding on/off at night based on system time?
#86
Davabled
FTW Member
  • Total Posts : 1755
  • Reward points : 0
  • Joined: 2003/10/09 00:50:04
  • Location: Michigan
  • Status: offline
  • Ribbons : 44
Re:FAH GPU Tracker V2 2010/05/16 11:46:53 (permalink)
Is it possible to set the FAH_GPU_IDLE  variable in a config file?
I've tried adding .bat file containing the command set FAH_GPU_IDLE=20 in the \FAH GPU Tracker V2\GPU0 folder in the hopes of making it a local setting for that specific client, but so far no success.

I'm hoping I can add the variable on a per-gpu basis (since one of my cards gets hotter than the other)

I realize adding the variable into the tracker based on WU is something that will be difficult and time consuming, I'm trying to find a sort of middle ground.  I know I can do it globally, I'm wondering how you were able to do it in the previous version of the GPU Tracker.
#87
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/16 20:39:40 (permalink)
Davabled

Is it possible to set the FAH_GPU_IDLE  variable in a config file?
I've tried adding .bat file containing the command set FAH_GPU_IDLE=20 in the \FAH GPU Tracker V2\GPU0 folder in the hopes of making it a local setting for that specific client, but so far no success.

I'm hoping I can add the variable on a per-gpu basis (since one of my cards gets hotter than the other)

I realize adding the variable into the tracker based on WU is something that will be difficult and time consuming, I'm trying to find a sort of middle ground.  I know I can do it globally, I'm wondering how you were able to do it in the previous version of the GPU Tracker.


I will be adding a full implementation of FAH_GPU_IDLE settings in the next few days. As of the 14th school is over for me so I now have the time to do this.

The feature will have to following capabilities:

- Set FAH_GPU_IDLE based on WU points value or project number
- Independent settings for each GPU.
- "Default" setting for any unknown WUs (also per GPU)

Sorry this took so long to get to, but school significantly limited the time I had to work on projects like this.

For recap, these are the things I am adding to 2.7:

- Deactivated CC option (no need for this until next year)
- Added heat control settings (FAH_GPU_IDLE)
- Per-client Gaming Pause
- Config page option for setting -forcegpu

I will also look into adding an option later that allows modifying the heat control settings by time of day, but this will not be in 2.7.

Davabled
Feature Request:
Would it be possible to setup an option to turn GPU folding on/off at night based on system time?


I will look into adding this feature at some point. It would work like the Gaming Pause feature, and simply pause clients during specified times.
post edited by jedi95 - 2010/05/17 00:38:35

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#88
loveha
Omnipotent Enthusiast
  • Total Posts : 10416
  • Reward points : 0
  • Joined: 2009/09/26 01:51:22
  • Location: Beulah Michigan
  • Status: offline
  • Ribbons : 62
Re:FAH GPU Tracker V2 2010/05/17 03:24:41 (permalink)
Thank for the time you put into this. Has made Folding so much easier especially for SMP folding. When GPU3 gets released for Fermis how long will it take to update this?

Edit - Mods please Sticky this. Such an awesome tool.
post edited by loveha - 2010/05/17 03:26:35

#89
jedi95
SSC Member
  • Total Posts : 773
  • Reward points : 0
  • Joined: 2008/03/04 05:43:23
  • Status: offline
  • Ribbons : 18
Re:FAH GPU Tracker V2 2010/05/17 11:17:02 (permalink)
loveha

Thank for the time you put into this. Has made Folding so much easier especially for SMP folding. When GPU3 gets released for Fermis how long will it take to update this?

Edit - Mods please Sticky this. Such an awesome tool.


Since I have a lot of time right now, I should be able to add it in 24-48 hours as long as it doesn't require major changes to the Tracker. Currently this is what I anticipate I will have to do to support GPU3:

1. Add new -forcegpu flag setting for Nvidia GF100.
2. Verify that the GPU3 client works correctly when running hidden.
3. Set the new version update to download the GPU3 client along with it
4. If there is some reason to run GPU2 after GPU3 comes out, I will add an option to pick which client to run

Main Rig: Ryzen 9 5950X|EVGA RTX 3090 FTW3 Ultra|32 GB DDR4 3800 CL14

#90
Page: < 12345.. > >> Showing page 3 of 27
Jump to:
  • Back to Mobile