EVGA

Hot!Enable Resizable Bar on EVGA GeForce RTX 30 Series

Page: < 12345.. > >> Showing page 3 of 37
Author
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:44:42 (permalink)
jamexr
Weird. I have rebar, above 4g decoding in my x570 aorus master, ryzen 3950x. However Precision x says mobo doesnt support it. Weird thing is Precision x never asked me to update the bios and it says "video bios is bar enabled", but im still on the previous video bios version (450w old xoc bios). The only thing precision updated is the MCU firmware. It does not show me a "update" bios on the bar tab...
 
Any thoughts?
 
https://i.imgur.com/OR0TMcK.jpg




What is the part number on your card?


#61
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:45:16 (permalink)
gxizhe
Can't we just get the vbios files? I installed PX1 and it won't launch after numerous reinstalls. Just closes itself after splash screen.




What is the part number on your card and what BIOS are you looking to flash?


#62
gxizhe
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2014/02/10 18:17:19
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:47:08 (permalink)
EVGA_JacobF
gxizhe
Can't we just get the vbios files? I installed PX1 and it won't launch after numerous reinstalls. Just closes itself after splash screen.




What is the part number on your card and what BIOS are you looking to flash?


10G-P5-3897-KR, and looking to install the ReSizeable Bar version of XOC bios.
#63
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:47:59 (permalink)
gxizhe
EVGA_JacobF
gxizhe
Can't we just get the vbios files? I installed PX1 and it won't launch after numerous reinstalls. Just closes itself after splash screen.




What is the part number on your card and what BIOS are you looking to flash?


10G-P5-3897-KR, and looking to install the ReSizeable Bar version of XOC bios.




Try this one: https://cdn.evga.com/bios/30Series/3897_OC_450W.zip


#64
MarcoWagner
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2021/03/30 09:20:06
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:48:38 (permalink)
Blank display after bios update and enabling ReBAR in MB bios.
 
Gigabyte z390 Gaming X Rev 1 - bios v 12i (latest)
i7 9700k
XC3 Ultra 3070
Latest nVidia game ready drivers to date.
Display Port used
 
1. I reset MB bios and disable 4G/Rebar and it boots normally.
2. If I disable CSM I have not drives to boot to.
 
?????? What do I do/
#65
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:49:51 (permalink)
CSM needs to be disabled. What hard drives are you using?


#66
glocked89
Superclocked Member
  • Total Posts : 186
  • Reward points : 0
  • Joined: 2019/01/16 23:48:00
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:51:43 (permalink)
Hey Jacob, can you post the vbios for 24G-P5-3975-KR?
#67
SubiXT
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2020/09/18 08:58:51
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:53:37 (permalink)
I did with the same result. Do I have the correct bios? I have an FTW3 Ultra
#68
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:53:45 (permalink)
glocked89
Hey Jacob, can you post the vbios for 24G-P5-3975-KR?




https://cdn.evga.com/bios/30Series/3975V940242C010.zip
 


#69
SubiXT
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2020/09/18 08:58:51
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:54:40 (permalink)
EVGA_JacobF
SubiXT
I just installed the latest version of EVGA Precision X1 1.1.8. it asked me to update the bios in order to have Resizable BAR enable. now one of the fans is not being detected. the fan is spinning but the sensor is not registering anything.  also the bios pushed is version 94.02.42.80.31




Can you try load defaults in PX1, then reboot PC.


I did with the same result. Do I have the correct bios? I have an FTW3 Ultra
#70
AdrianK258
New Member
  • Total Posts : 25
  • Reward points : 0
  • Joined: 2020/12/21 06:54:04
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:55:51 (permalink)
EVGA_JacobF
gxizhe
EVGA_JacobF
gxizhe
Can't we just get the vbios files? I installed PX1 and it won't launch after numerous reinstalls. Just closes itself after splash screen.




What is the part number on your card and what BIOS are you looking to flash?


10G-P5-3897-KR, and looking to install the ReSizeable Bar version of XOC bios.




Try this one: https://cdn.evga.com/bios/30Series/3897_OC_450W.zip


how about XOC bios for us - hybrids?  i have this one - 94.02.42.40.F7
#71
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:56:55 (permalink)

how about XOC bios for us - hybrids?  i have this one - 94.02.42.40.F7




Whats the part number on your card and which XOC BIOS is applied?


#72
glocked89
Superclocked Member
  • Total Posts : 186
  • Reward points : 0
  • Joined: 2019/01/16 23:48:00
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:57:00 (permalink)
EVGA_JacobF
glocked89
Hey Jacob, can you post the vbios for 24G-P5-3975-KR?




https://cdn.evga.com/bios/30Series/3975V940242C010.zip
 


Thank you Jacob, you are the best!


#73
AdrianK258
New Member
  • Total Posts : 25
  • Reward points : 0
  • Joined: 2020/12/21 06:54:04
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:58:37 (permalink)
EVGA_JacobF

how about XOC bios for us - hybrids?  i have this one - 94.02.42.40.F7




Whats the part number on your card and which XOC BIOS is applied?


Part no# 10G-P5-3897-KR but I installed hybrid and converted card to the XOC hybrid   - https://www.evga.com/EVGA...?file=3898_BIOS_OC.zip


#74
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:58:51 (permalink)
SubiXT
EVGA_JacobF
SubiXT
I just installed the latest version of EVGA Precision X1 1.1.8. it asked me to update the bios in order to have Resizable BAR enable. now one of the fans is not being detected. the fan is spinning but the sensor is not registering anything.  also the bios pushed is version 94.02.42.80.31




Can you try load defaults in PX1, then reboot PC.


I did with the same result. Do I have the correct bios? I have an FTW3 Ultra



Can you try an uninstall of Precision X1 and reinstall?


#75
The_Professor
New Member
  • Total Posts : 56
  • Reward points : 0
  • Joined: 2012/04/04 09:56:11
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:59:14 (permalink)
Hi,
is it posible to get only the vBIOS for my RTX3070 XC3? In past i got so many bad results and expirence with EVGA Precision X1, broken FAN curves e.g. 
And i dont wont to install that software. So is it possible only the get the bios for 08G-P5-3755-KR?
 
Many Thanks Jacob :)
#76
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:59:17 (permalink)
 

Part no# 10G-P5-3897-KR but I installed hybrid and converted card to the XOC hybrid   - https://www.evga.com/EVGA...?file=3898_BIOS_OC.zip






Try this one https://cdn.evga.com/bios/30Series/3898_OC_450W.zip
 


#77
jb649
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2013/05/18 16:27:54
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:59:37 (permalink)
I had to switch my motherboard "BIOS CSM/UEFI Mode" setting from CSM to UEFI to get video to work. I'm surprised it didn't automatically detect the issue and make the switch itself. Good thing there's a BIOS switch on the graphics card. Anyways, you guys should verify your motherboard settings beforehand.

Hopefully this is automatically detected in the next BIOS version on my motherboard.

3090 FTW3 ULTRA
MEG Z490 UNIFY (BIOS version: 7C71vA7)
Above 4G memory/Crypto Currency mining: enabled
Re-Size BAR Support: enabled
#78
DCGColts
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2016/05/11 16:48:14
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:59:51 (permalink)
InfusionOfFear
Hi, I just followed those steps, and still no video on the OC bios side. Connected via HDMI if that matters (only have 1 monitor connected).

Nvidia is always randomly unchecking my HDMI connected device LG c9 gsync compatible tv on certain driver installs this could be your issue. Thankfully I have multi-monitors and not just hdmi device. I am not 100% sure this would happen if I only had 1 display though but I have had it happen when monitor is off not showing as connected and I had to turn it on to get display back and recheck TV as device, so its possible this could be your issue.
 
EDIT: I see you fix your issue already so nvm.

post edited by DCGColts - 2021/03/30 10:05:19

Attached Image(s)

#79
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 09:59:57 (permalink)
The_Professor
Hi,
is it posible to get only the vBIOS for my RTX3070 XC3? In past i got so many bad results with EVGA Precision X1, broken FAN curves e.g. 
And i dont wont to install that software. So is it possible only the get the bios for 08G-P5-3755-KR?
 
Many Thanks Jacob :)




https://cdn.evga.com/bios/30Series/3755V94043A405E.zip
 


#80
SubiXT
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2020/09/18 08:58:51
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:00:51 (permalink)
EVGA_JacobF
SubiXT
EVGA_JacobF
SubiXT
I just installed the latest version of EVGA Precision X1 1.1.8. it asked me to update the bios in order to have Resizable BAR enable. now one of the fans is not being detected. the fan is spinning but the sensor is not registering anything.  also the bios pushed is version 94.02.42.80.31




Can you try load defaults in PX1, then reboot PC.


I did with the same result. Do I have the correct bios? I have an FTW3 Ultra



Can you try an uninstall of Precision X1 and reinstall?


Will do. What bios version should I have loaded. Also, thank you for the quick response and effort; very appreciated.
#81
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:02:14 (permalink)
jb649
I had to switch my motherboard "BIOS CSM/UEFI Mode" setting from CSM to UEFI to get video to work. I'm surprised it didn't automatically detect the issue and make the switch itself. Good thing there's a BIOS switch on the graphics card. Anyways, you guys should verify your motherboard settings beforehand.

Hopefully this is automatically detected in the next BIOS version on my motherboard.

3090 FTW3 ULTRA
MEG Z490 UNIFY (BIOS version: 7C71vA7)
Above 4G memory/Crypto Currency mining: enabled
Re-Size BAR Support: enabled




Yup, looks like CSM is not disabled by default on some motherboards, updated top post to highlight this.


#82
justin_43
CLASSIFIED Member
  • Total Posts : 3129
  • Reward points : 0
  • Joined: 2008/01/04 18:54:42
  • Status: offline
  • Ribbons : 6
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:03:01 (permalink)
EVGA_JacobF
gxizhe
Can't we just get the vbios files? I installed PX1 and it won't launch after numerous reinstalls. Just closes itself after splash screen.




What is the part number on your card and what BIOS are you looking to flash?




Hi Jacob, can you post the Resizable Bar VBIOS file for 24G-P5-3987-KR?
 
Is it possible to get the files for both the standard OC BIOS and also the XOC BIOS both with ReBAR support?
 
Thanks Jacob, it would be appreciated.

• ASUS Z590 Strix • Intel Core i7 11700K • 32GB G.Skill TridentZ • EVGA 1600 T2 • EVGA RTX 3090 FTW3
• EVGA X299 Dark • Intel Core i7 9800X • 32GB Corsair Vengeance • EVGA 1000 G3 • EVGA GTX 3080 Ti
• ASUS X299 Strix • Intel Core i9 7960X • 64GB Corsair Vengeance • EVGA 850 G2 • EVGA GTX 1050 Ti
• LG CX 48" OLED • Lian Li PC-D600WB • Lian Li PC-A61B • Lian Li PC-G70B • Lian Li PC-V2000B

Click here^ to save 3%-10% on your next EVGA purchase with my associates code - HIF96TVOT3VM9OV
#83
gxizhe
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2014/02/10 18:17:19
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:03:26 (permalink)
EVGA_JacobF
gxizhe
EVGA_JacobF
gxizhe
Can't we just get the vbios files? I installed PX1 and it won't launch after numerous reinstalls. Just closes itself after splash screen.




What is the part number on your card and what BIOS are you looking to flash?


10G-P5-3897-KR, and looking to install the ReSizeable Bar version of XOC bios.




Try this one:


That worked, thx a lot.
I am not sure what is the problem with 1.1.8 of PX1 on my PC but I went back to 1.1.7 and it launches just fine.
Running Windows Insider build, don't know if that affects anything.
#84
jamexr
iCX Member
  • Total Posts : 265
  • Reward points : 0
  • Joined: 2016/07/21 16:30:16
  • Location: SLC, Utah, USA
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:03:58 (permalink)
EVGA_JacobF
jamexr
Weird. I have rebar, above 4g decoding in my x570 aorus master, ryzen 3950x. However Precision x says mobo doesnt support it. Weird thing is Precision x never asked me to update the bios and it says "video bios is bar enabled", but im still on the previous video bios version (450w old xoc bios). The only thing precision updated is the MCU firmware. It does not show me a "update" bios on the bar tab...
 
Any thoughts?
 
https://i.imgur.com/OR0TMcK.jpg




What is the part number on your card?




Im Jamexman on twitter Jacob, you just sent me the BAR XOC 450w bioses for my FTW3 ultra converted to Hybrid (3898) and it worked. I replied on twitter as well. Thanks man, you rock. BAR enabled now!
#85
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:05:23 (permalink)



Hi Jacob, can you post the Resizable Bar VBIOS file for 24G-P5-3987-KR?
 
Is it possible to get the files for both the standard OC BIOS and also the XOC BIOS both with ReBAR support?
 
Thanks Jacob, it would be appreciated.




Normal: https://cdn.evga.com/bios/30Series/3987V94024280AD.zip
OC: https://cdn.evga.com/bios/30Series/3987K9402428027.zip
XOC: https://cdn.evga.com/bios/30Series/3987_OC_500W.zip
 


#86
Dasoa
New Member
  • Total Posts : 82
  • Reward points : 0
  • Joined: 2020/11/05 12:44:45
  • Status: offline
  • Ribbons : 0
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:05:40 (permalink)
I will receive thanks to the RMA set up by evga a new card (rtx 3090 ftw3 ultra) which will solve I suppose the problems of power balancing. But evga indicate that these cards are delivered with the 500w bios installed.
So if I install precision x1 1.8 the vbios for the rezise bar will load automatically?
I will lose the 500w bios pre-installed by evga?
The v bios does not reach the 500w if we want oc?
#87
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:05:51 (permalink)



Im Jamexman on twitter Jacob, you just sent me the BAR XOC 450w bioses for my FTW3 ultra converted to Hybrid (3898) and it worked. I replied on twitter as well. Thanks man, you rock. BAR enabled now!




Cool, yes need to look into this one for HYBRID kit upgrades.


#88
EVGA_JacobF
EVGA Product Manager
  • Total Posts : 16901
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:06:12 (permalink)
Dasoa
I will receive thanks to the RMA set up by evga a new card which will solve I suppose the problems of power balancing. But evga indicate that these cards are delivered with the 500w bios installed.
So if I install precision x1 1.8 the vbios for the rezise bar will load automatically?
I will lose the 500w bios pre-installed by evga?
The v bios does not reach the 500w if we want oc?




It will apply the correct update for your card.


#89
justin_43
CLASSIFIED Member
  • Total Posts : 3129
  • Reward points : 0
  • Joined: 2008/01/04 18:54:42
  • Status: offline
  • Ribbons : 6
Re: Enable Resizable Bar on EVGA GeForce RTX 30 Series 2021/03/30 10:06:15 (permalink)
EVGA_JacobF



Hi Jacob, can you post the Resizable Bar VBIOS file for 24G-P5-3987-KR?
 
Is it possible to get the files for both the standard OC BIOS and also the XOC BIOS both with ReBAR support?
 
Thanks Jacob, it would be appreciated.




Normal: https://cdn.evga.com/bios/30Series/3987V94024280AD.zip
OC: https://cdn.evga.com/bios/30Series/3987K9402428027.zip
XOC: https://cdn.evga.com/bios/30Series/3987_OC_500W.zip
 





Thanks Jacob! You are the man!

• ASUS Z590 Strix • Intel Core i7 11700K • 32GB G.Skill TridentZ • EVGA 1600 T2 • EVGA RTX 3090 FTW3
• EVGA X299 Dark • Intel Core i7 9800X • 32GB Corsair Vengeance • EVGA 1000 G3 • EVGA GTX 3080 Ti
• ASUS X299 Strix • Intel Core i9 7960X • 64GB Corsair Vengeance • EVGA 850 G2 • EVGA GTX 1050 Ti
• LG CX 48" OLED • Lian Li PC-D600WB • Lian Li PC-A61B • Lian Li PC-G70B • Lian Li PC-V2000B

Click here^ to save 3%-10% on your next EVGA purchase with my associates code - HIF96TVOT3VM9OV
#90
Page: < 12345.. > >> Showing page 3 of 37
Jump to:
  • Back to Mobile