ataya
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2019/01/09 23:33:50
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/10 12:06:16
(permalink)
you guys think is it possible to control addressable leds by connecting rog aura terminal to dark' s usb 2.0 header, and then controlling leds and trident z royal rams with aura sync software? I have a lot of drgb led investment in my case and fans. Also have the royal rams. So it s important for me if aura sync works on dark and controls both rams and aura terminal for leds.
|
Delirious
EVGA Forum Moderator
- Total Posts : 11193
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z390 Motherboards!
2019/01/10 12:16:13
(permalink)
ataya
you guys think is it possible to control addressable leds by connecting rog aura terminal to dark' s usb 2.0 header, and then controlling leds and trident z royal rams with aura sync software? I have a lot of drgb led investment in my case and fans. Also have the royal rams. So it s important for me if aura sync works on dark and controls both rams and aura terminal for leds.
yeah, I think so. I was thinking of getting the corsair unit to to the same thing for fans. the usb is just a way for the software to communicate to the module then to the aura terminal
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
ataya
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2019/01/09 23:33:50
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/10 12:22:35
(permalink)
Thx for the answer, but you think aura sync controls royal rams on evga mobo?
|
mattman657
iCX Member
- Total Posts : 274
- Reward points : 0
- Joined: 2013/05/07 16:50:27
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/10 13:02:56
(permalink)
ataya
Thx for the answer, but you think aura sync controls royal rams on evga mobo?
Can't speak for Asus aura sync but I have the Cooler Master RGB Controller, which has it's own software, coming in the mail tomorrow to be used on my Dark build. Word on the street is that the controller's software WILL be able to control G.Skill RGB.
EVGA Z390 Dark | Intel i9900k 5.2 GHz | 2 x EVGA 2080Ti FTW3 Ultra | G.Skill TridentZ 4,133MHz | Samsung 970 Pro & Evo, 850 Evo Lian PC-V3000 | EK Res & Dual D5 Pump | 3 x Alphacool UT60 | Noctua & Akasa Fans | Asus PG279Q
|
GGTV-Jon
FTW Member
- Total Posts : 1813
- Reward points : 0
- Joined: 2017/11/25 14:11:43
- Location: WA, USA
- Status: offline
- Ribbons : 19
Re: EVGA Z390 Motherboards!
2019/01/10 14:56:46
(permalink)
mattman657
ataya
Thx for the answer, but you think aura sync controls royal rams on evga mobo?
Can't speak for Asus aura sync but I have the Cooler Master RGB Controller, which has it's own software, coming in the mail tomorrow to be used on my Dark build. Word on the street is that the controller's software WILL be able to control G.Skill RGB.
I have the G.Skill software installed for my trident z memory. G.Skill used an Asus aura module in their software which I would think the actual Asus software will probably work then Only issue I have had thus far is that any game that uses EAC (Easy Anti Cheat) complains about the Lighting.exe service. EAC reports there is an exploit in it and it is up to Asus to fix it before they green lite it = I have to stop the service if I want to play on a public server = memory RGB can flake out
post edited by GGTV-Jon - 2019/01/11 12:58:49
|
zaphrodbox
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2017/03/07 06:11:58
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/11 03:53:25
(permalink)
Just ordered my Z390 DARK and was wondering what the delivery speed is on the free elite member shipping option? Is it equivalent to the standard ground or is it by any chance faster than standard? Thanks!
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Z390 Motherboards!
2019/01/11 04:18:55
(permalink)
zaphrodbox
Just ordered my Z390 DARK and was wondering what the delivery speed is on the free elite member shipping option? Is it equivalent to the standard ground or is it by any chance faster than standard? Thanks!
I would say about the same. Ordered mine on the 8th and scheduled delivery is Monday 14th.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
mattman657
iCX Member
- Total Posts : 274
- Reward points : 0
- Joined: 2013/05/07 16:50:27
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/11 06:50:48
(permalink)
d.burnette
zaphrodbox
Just ordered my Z390 DARK and was wondering what the delivery speed is on the free elite member shipping option? Is it equivalent to the standard ground or is it by any chance faster than standard? Thanks!
I would say about the same.
Ordered mine on the 8th and scheduled delivery is Monday 14th.
Same here. Monday delivery.
EVGA Z390 Dark | Intel i9900k 5.2 GHz | 2 x EVGA 2080Ti FTW3 Ultra | G.Skill TridentZ 4,133MHz | Samsung 970 Pro & Evo, 850 Evo Lian PC-V3000 | EK Res & Dual D5 Pump | 3 x Alphacool UT60 | Noctua & Akasa Fans | Asus PG279Q
|
tatm mrk. RIVE
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2013/10/04 13:33:25
- Location: PHX
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/11 09:43:40
(permalink)
I already addressed this, G.skill has its own software. Lol tho “ I really invested alot in rgbs for this build” buys only mobo without RGB support... Y did u go for this Evga elite shipping is the same as ground UPS. Mines gonna be here today Just finished ripping the garbage code mobo out. Should be here anytime now.
post edited by tatm mrk. RIVE - 2019/01/11 09:46:35
9900k- dark z390- GTX 1080TI poseidon- 16gb 4800 royal 7820x- RVIE - 64gb g.skill b-die -rtx 2080ti FTW3
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Z390 Motherboards!
2019/01/11 10:26:53
(permalink)
tatm mrk. RIVE
I already addressed this, G.skill has its own software.
Lol tho “ I really invested alot in rgbs for this build” buys only mobo without RGB support...
Y did u go for this
Evga elite shipping is the same as ground UPS.
Mines gonna be here today
Just finished ripping the garbage code mobo out. Should be here anytime now.
 Lucky man. Look forward to hearing your reports on the board!
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
ataya
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2019/01/09 23:33:50
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/11 10:40:36
(permalink)
tatm mrk. RIVE
I already addressed this, G.skill has its own software.
Lol tho “ I really invested alot in rgbs for this build” buys only mobo without RGB support...
Y did u go for this
Evga elite shipping is the same as ground UPS.
Mines gonna be here today
Just finished ripping the garbage code mobo out. Should be here anytime now.
I started collecting parts 4-5 month before. Have 12 phanteks digital halos for radiator fans. And already sanded down the die of 9900k to 0.4 mm. :) I like pushing my pc to the limits in daily use. I only need mobo. This or apex. Apex already has rgb header. But if dark is overclocking better for less voltage, I for sure want dark. And also depends on which comes first in amazon or newegg. I have no option other than these web sites because customs clearance can be very problematic in my country.
|
Delirious
EVGA Forum Moderator
- Total Posts : 11193
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z390 Motherboards!
2019/01/11 12:45:35
(permalink)
there's two M.2 Socket 3 Key-M 110mm slots. one is PM1 and the other is PM2. I have two drives. One for 970 evo for OS (3,500 MB/s) and the other a WD drive for storage and secondary OS at (3,400 MB/s) edit: corrected the speed. is there any reason to use one slot over the other. I was going to put the evo in PM1 and the WD in PM2. Any problems with that?
post edited by Delirious - 2019/01/11 13:03:43
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
GGTV-Jon
FTW Member
- Total Posts : 1813
- Reward points : 0
- Joined: 2017/11/25 14:11:43
- Location: WA, USA
- Status: offline
- Ribbons : 19
Re: EVGA Z390 Motherboards!
2019/01/11 12:54:02
(permalink)
Is that WD a M.2 sata or M.2 NVME?
If it is sata then you need to double check if it will even work
|
Delirious
EVGA Forum Moderator
- Total Posts : 11193
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z390 Motherboards!
2019/01/11 13:01:04
(permalink)
M.2 NVME and I'd like to correct that. The WD black is 3,400 MB/s
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
GGTV-Jon
FTW Member
- Total Posts : 1813
- Reward points : 0
- Joined: 2017/11/25 14:11:43
- Location: WA, USA
- Status: offline
- Ribbons : 19
Re: EVGA Z390 Motherboards!
2019/01/11 13:13:44
(permalink)
Delirious
M.2 NVME and I'd like to correct that. The WD black is 3,400 MB/s
LOL, much better In reality it doesn't matter and like it was asked recently here about having both in on an Z390 Dark during install someone from EVGA (sorry, don't remember exactly who) suggested disabling the one in the bios that will not be used for the primary OS during OS install
|
Delirious
EVGA Forum Moderator
- Total Posts : 11193
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z390 Motherboards!
2019/01/11 13:25:17
(permalink)
GGTV-Jon
Delirious
M.2 NVME and I'd like to correct that. The WD black is 3,400 MB/s
LOL, much better
In reality it doesn't matter and like it was asked recently here about having both in on an Z390 Dark during install someone from EVGA (sorry, don't remember exactly who) suggested disabling the one in the bios that will not be used for the primary OS during OS install
I'll do that. the dark board has a 6 pin supplemental pcie and two 8 pin EPS. I'll be running two 690s in SLI until funds provide for a better card. Should I use two 8 pin cables for the EPS (nothing crazy for the cpu planned) and the supplemental 6 pin pcie for the SLI?
post edited by Delirious - 2019/01/11 13:46:28
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
tatm mrk. RIVE
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2013/10/04 13:33:25
- Location: PHX
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/11 13:29:19
(permalink)
“Dark oc guide and tweaking manual available at https://xdevs.com/guide/e399ocg “ Sorry if im resharing i only saw the regular manual n didnt look too hard.. took a ton of pic but they wont upload
9900k- dark z390- GTX 1080TI poseidon- 16gb 4800 royal 7820x- RVIE - 64gb g.skill b-die -rtx 2080ti FTW3
|
zaphrodbox
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2017/03/07 06:11:58
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/11 16:32:15
(permalink)
Not sure if this is accurate or not but pretty sure it says the top slot is NVME and the bottom is SSD M.2 only in the instruction manual. Let me know if you are able to run NVMe speeds on both M.2 slots please. Thanks!
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Z390 Motherboards!
2019/01/11 16:54:56
(permalink)
Hopefully EVGA will also post an overclocking guide here on the forums for the Dark like they have previously.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
d.burnette
CLASSIFIED Member
- Total Posts : 3508
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Z390 Motherboards!
2019/01/11 16:57:50
(permalink)
zaphrodbox
Not sure if this is accurate or not but pretty sure it says the top slot is NVME and the bottom is SSD M.2 only in the instruction manual. Let me know if you are able to run NVMe speeds on both M.2 slots please. Thanks!
Hmm pretty sure those two m2 slots are both the same aren't they? I certianly have two m.2 Nvme drives for them. From the EVGA Dark Manual: 2x M.2 Key-M 110mm slot PCIe/NVme and Intel Optame
post edited by d.burnette - 2019/01/11 17:06:04
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
elezraita
New Member
- Total Posts : 62
- Reward points : 0
- Joined: 2014/05/03 18:17:56
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/11 17:45:50
(permalink)
d.burnette
zaphrodbox
Not sure if this is accurate or not but pretty sure it says the top slot is NVME and the bottom is SSD M.2 only in the instruction manual. Let me know if you are able to run NVMe speeds on both M.2 slots please. Thanks!
Hmm pretty sure those two m2 slots are both the same aren't they?
I certianly have two m.2 Nvme drives for them.
From the EVGA Dark Manual:
2x M.2 Key-M 110mm slot PCIe/NVme and Intel Optame
Yes, one of the x4 M.2 Key-M shares lanes with the U.2 slot and using it will disable the U.2. The other x4 M.2 Key-M slot shares lanes with PE3 and using it will disable PE3. This is what it says on page 27 of the manual. So, yes, you can have 2 M.2 NVME ssds running at x4. That's one of the reasons I waited so long for this board instead of just going for the FTW. One of the reasons.
|
dante`afk
New Member
- Total Posts : 74
- Reward points : 0
- Joined: 2016/07/26 14:07:48
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/11 18:05:31
(permalink)
tatm mrk. RIVE
“Dark oc guide and tweaking manual available at “
Sorry if im resharing i only saw the regular manual n didnt look too hard.. took a ton of pic but they wont upload
that's no guide at all??? it stops at vrm design, 75% is missing from the table of contents.
post edited by dante`afk - 2019/01/11 18:07:40
12900k - asus z690 APEX - 32gb 6400 cl303090 FE - phanteks 719 - corsair ax1600idual mora3 420 - 2x d5, 2x ddc - samsung neo g9 49" 240hz - 2x 27" 120hz
|
tatm mrk. RIVE
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2013/10/04 13:33:25
- Location: PHX
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/11 18:25:34
(permalink)
d.burnette
Hopefully EVGA will also post an overclocking guide here on the forums for the Dark like they have previously.
this is the one the posted on the PCB bench board dante`afk
tatm mrk. RIVE
“Dark oc guide and tweaking manual available at “
Sorry if im resharing i only saw the regular manual n didnt look too hard.. took a ton of pic but they wont upload
that's no guide at all??? it stops at vrm design, 75% is missing from the table of contents.
I am quoting the shipped contents I was busy building my pc not reading the guide
post edited by tatm mrk. RIVE - 2019/01/11 18:34:05
9900k- dark z390- GTX 1080TI poseidon- 16gb 4800 royal 7820x- RVIE - 64gb g.skill b-die -rtx 2080ti FTW3
|
GGTV-Jon
FTW Member
- Total Posts : 1813
- Reward points : 0
- Joined: 2017/11/25 14:11:43
- Location: WA, USA
- Status: offline
- Ribbons : 19
Re: EVGA Z390 Motherboards!
2019/01/11 18:50:06
(permalink)
dante`afk
tatm mrk. RIVE
“Dark oc guide and tweaking manual available at “
Sorry if im resharing i only saw the regular manual n didnt look too hard.. took a ton of pic but they wont upload
that's no guide at all??? it stops at vrm design, 75% is missing from the table of contents.
Looks to be a work in progress, as the headers / links are there for the missing stuff just need the rest of the content to get loaded to that page
|
tatm mrk. RIVE
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2013/10/04 13:33:25
- Location: PHX
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/11 18:56:55
(permalink)
I dunno, didnt need it. Theres not really much to mess with The gigabyte OC guideis good enough. Just vdroop setting low is the same as level 7 or 8 on other boards Im in windows after 15minutes 5.1ghz 1.325 4600 c18 1.45 Downloading driver n eatin dinner then ill update Also i am so hyped, this has a ps2 input! Windows 7 is gonna be so easy to play with Cant force boot my ssd with my os tho so either gonna just use this as an excuse to upgrade to nvme Or optane x huge data drive so far only issue is that theres no eleet tuning utility loaded up to the website and the driver usb sends me there.
post edited by tatm mrk. RIVE - 2019/01/11 19:46:05
9900k- dark z390- GTX 1080TI poseidon- 16gb 4800 royal 7820x- RVIE - 64gb g.skill b-die -rtx 2080ti FTW3
|
pimpx
New Member
- Total Posts : 53
- Reward points : 0
- Joined: 2018/12/18 21:32:16
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/12 19:09:02
(permalink)
Anyone planning on using gskill trident z royal ram with this board?
I want 32gb but they still haven't released the 2x16gb sticks yet :'(
|
thebski
SSC Member
- Total Posts : 958
- Reward points : 0
- Joined: 2009/08/20 18:44:27
- Status: offline
- Ribbons : 5
Re: EVGA Z390 Motherboards!
2019/01/12 20:49:52
(permalink)
Can anyone tell me if the Dark has temp headers that can be used to control fan speeds via the bios?
Asus Maximus X Apex || Intel Core i7-8700K @ 5.2 Ghz 1.376V || 16 GB Corsair Dominator Platinum SE @ 4133 C17 || EVGA GTX 1080 || EVGA 850 T2 || Saumsung 950 Pro 512 GB || Samsung 960 Pro 1 TB || Saumsung 850 Pro 1 TB || Creative ZxR ||
|
tatm mrk. RIVE
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2013/10/04 13:33:25
- Location: PHX
- Status: offline
- Ribbons : 0
Re: EVGA Z390 Motherboards!
2019/01/12 20:54:37
(permalink)
thebski
Can anyone tell me if the Dark has temp headers that can be used to control fan speeds via the bios?
it does
9900k- dark z390- GTX 1080TI poseidon- 16gb 4800 royal 7820x- RVIE - 64gb g.skill b-die -rtx 2080ti FTW3
|
thebski
SSC Member
- Total Posts : 958
- Reward points : 0
- Joined: 2009/08/20 18:44:27
- Status: offline
- Ribbons : 5
Re: EVGA Z390 Motherboards!
2019/01/12 21:10:16
(permalink)
Awesome. I couldn't see them in pics, but that's important to me. Thanks!
Asus Maximus X Apex || Intel Core i7-8700K @ 5.2 Ghz 1.376V || 16 GB Corsair Dominator Platinum SE @ 4133 C17 || EVGA GTX 1080 || EVGA 850 T2 || Saumsung 950 Pro 512 GB || Samsung 960 Pro 1 TB || Saumsung 850 Pro 1 TB || Creative ZxR ||
|
zaphrodbox
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2017/03/07 06:11:58
- Status: offline
- Ribbons : 1
Re: EVGA Z390 Motherboards!
2019/01/12 23:38:27
(permalink)
I was wrong above when I questioned whether NVMe would work on both M.2 slots as others pointed out, sorry about that. Also found according to page 19-20 of the manual both M.2 drives will function at NVMe speeds; however, the first M.2 will not work with SATA speeds, whereas the second will work with both NVMe or SATA.
|