Yeap it's the original date of the Update No worries

amb669

this bios STOMPS bios 82 on e758, the difference is night and day for whatever reason

Please elaborate. I was under the impression that the only difference was added cpu compatibility.

hi
i have updated from 82 biso to 83 and  i have a problem the
system idle process is at 99 and never goes down ???

jdookie

amb669

this bios STOMPS bios 82 on e758, the difference is night and day for whatever reason

Please elaborate. I was under the impression that the only difference was added cpu compatibility.

He prob has one of those newer CPUs. ??

Been running the 82 on my 760 rock steady. Updated to 83 and been getting random reboots for no reason. No bsod's or reason. Just boom reboot. Most settings are on auto except for ram which is set to 1.65 . Any way to reflash to 82?

ok reflashed to 82 and it seems to have cleared up the problem. Very strange that a bios was the cause. Followed the instructions to the letter and have not had any problems except with this one. Also when using the memory profile since flashing to 83, it now causes my computer to reboot on the post even with the reflash to 82. Change back to standard and all is ok. BTW dimm voltage is set to 1.65 and it worked before. Says memory at 1995 and it's rated for 2000 so it should not be a problem. Any profiles to o/c memeory and maybe set it to 1600.  

Jacob, this isnt exactly related to this bios, but one of the updates in the 80 series seems to have made USB coimpatibility worse. I use to be able to sync my iPhone with iTunes no problem, took my x58 Classified system down for a few months while I rebuilt it (New CPU/Ram/HD) and now I get the old problem with iTunes freezing when the iPhone is plugged in (unfreezes when removed).
 
I know it happens with Bios 82 and 83. When I took the system down it was on Bios 78 or 79. From my searches it seems this was an old issue that was fixed through bios updates in the past, but it seems its back.
 
It only seems to happen in the presence of an Antivirus, tested with MS Security Essentials, Nod32 and Kaspersky (Trend Titanium diddnt do it, but probably because its much less comprehensive) on my current install of Windows 7 x64 and on 2 fresh installs, 1 with absoloutly no updates/non essential drivers and one fully updated. You need to remove them to make it work again, simply disabling does not effect it.
I have a Gigabyte USB3 card that it also happens on so its not a specific problem with the onboard USB controller.
 
Works fine on my socket 775 system.

This is a known issue, change the boot order in the BIOS and you'll be fine.

I found that I had my SATA drives set to IDE in the BIOS. I changed to AHCI and that fixed the JMicron RAID boot problem. I dont understand how but very happy it did!

More reasons for us to stick with X58 now that Bulldozer utterly failed...
Hope we'll see some nice BIOS fixes and updates soon!

Looks like the USB issues are back with 8x BIOS releases.
Here's another person with a similar problem.

doomer1234321

My 470 gtx locks up with 83, 82, or any other bios above 59 on my 760 ... (mostly when running games ) on 59 i can run it for days with no lockups but with Intel raid on in 59 windows feels very sluggish  but its good on 82 83 lol im stuck in between a rock and a hard place...
ive got 2 470s i run them separately(1 at a time) in the same computer they both lockup...

Same here, however i replaced cards with HD6970 Setup. Bios 82/83 are ****ed up, unfortunately eVga didn't look at it.

i have a small question why my MB temperature say 213c. (THRM) but my MB is not hot any on speccy it say socket 432.any help whit this will be appreciated.                     TY

echonight

i have a small question why my MB temperature say 213c. (THRM) but my MB is not hot any on speccy it say socket 432.any help whit this will be appreciated.                     TY

If you your board has one, check to see if you have the X-Cool jumper set to the wrong position, that could account for the temperature being way off.
 
I'm not sure why it would say socket 432... what software is telling you that?

I have X58 SLI motherboard and I downloaded the CD version .  However, the ISO image is empty.  It does not contain any files.  Can someone verify the files are in the ISO image and if they are, any suggestions on why I'm not seeing them?