wwxww

bcavnaugh

wwxww
I ordered one of those from Amazon or Newegg...Turned out to be a Chinese knock off.
edit: Thermaltake

Do you have a Link so I can compare?

https://www.newegg.com/Product/Product.aspx?Item=9SIAHFV8J01503

Cons:

                    The cable you get is not the cable advertised. The cable I bought came from China, specifically a company called WerleoOfficial. The cable took FOREVER to ship to me then once I got it I realized it was not even what was advertised. The cable looks like it was made by a third grader who paper mached it. There was no Thermaltake branding on the cable and the screws would not fit in the cable. I have a thermlatake level 20 GT case so a thermaltake card should fit. I ended up buying the real thermaltake card from best buy and it works like a charm. When I compared it to the cheap knock off version i got from china it was completely different. The actual cable was smooth and well built and had bigger holes in it to fit the screws properly and was a little longer than the one I got from China. I asked for a refund and have yet to hear back. All i'm saying is Buyer be ware. I hope someone does not go through the eager waiting and then disappointment I did. If you look up WerleoOfficial  reviews you can tell they are horrible. I honestly don't know why newegg allows them to sell products.                

Other Thoughts:

                    I do not recommend the knock off version of this product. The real Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm Cable is amazing. Do not by this one though.

 
From the invoice...says Newegg ships but it came from China after 6 weeks. I was not able to return it, IDT. I was not the only one.

And was this "Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1" From Thermaltake?

I ordered this one as well to test with.
Thermaltake AC-045-CN1OTN-C1 TT Premium PCI-E x16 3.0 Extender Riser Cable 300mm Graphic Cards Black

is the 3dmark hof down for anyone else? I want to admire every ones 2080ti KPE scores and CANT!!!

All ya guys broke it!! :/

bcavnaugh

degenerate
Hm I guess I would need some other adapter to go with it, unless someone makes a right-angle one? Are they all case-specific or is there a universal adapter they will all fit with?

right-angle
 

3dmark has actually been broken for a two days now. I could not look at my past results as there was no link to look at them.

bcavnaugh

johnksss
3dmark has actually been broken for a two days now. I could not look at my past results as there was no link to look at them.

For me this still works https://www.3dmark.com/results but for only the last 25 Scores. I hope they are going to bring back our Results
Is what is also gone are all your Benchmarks that are listed under;
Welcome Username.
Results
 
But my older links all still work https://www.3dmark.com/3dm11/12530096

Yes. That is the only part i'm talking about that there is no link.
Along with HOF not populating.
 

Zeddivile
@triOx
 
Nice scores. Seeing you up on the HOF's got me motivated to check out the new but broken driver 430 or w/e it is.
 

Glad I could help you get out there and crush us more!   I'm pretty stubborn, just kept going even with TimeSpy flickering away, did manage a few new HOF scores.  I eventually did DDU downgrade back to 425 though.  I'll try again when the next driver drops.

I failed to test the CM riser last night. Got carried away with Firestrike and then hit some weird wall were I was hitting Graphics score and Physics score personal records but combined went down the drain.
https://www.3dmark.com/fs/19270845
 
A few times hit a graphics score over 43000 but could not get everything to play nice. Literally only thing I can think of is ran out of power at the receptacle. or the 1300G2 reached its power delivery limit idk.
GPU pulling 400~ watts avg
9900K pulling ~300 watts avg
 
Currently using this.
 
https://www.panamax.com/product/bluebolt-controllable-power-conditioner-8-outlets-M4315-PRO
pulled from my AV rack for my house. I think I need something different...
Any suggestions on power delivery gear?

@TriOx  What is holding the Bottom of the Ribbon Cable (PCIe Connector) to the Bottom of the Graphics Cards?

wwxww
https://www.3dmark.com/co...s/19275265/fs/19275190
I think I might be able to get graphics past the 42,xxx mark with this stock cooler and the card running 47-49F. Watts are mostly high 3xx up to 420's.  

Add this to the Description "M=1600 G=160 LL 0 1.23750 V 1.48750 V" to show what settings you are using for each run.
Like here https://www.3dmark.com/3dm11/13296607
M(Memory XP1)=1600 G(Graphics PX1)=160 LL 0 (NVVDD) 1.23750 V (FBVDD) 1.48750 V
This may help others in their Benchmarking as well.

@wwxww
Peak GPU temp 43c
Peak Vmem temp 54c
 
The stock CLC is pure witchcraft.
Thinking about it I am sure the insane VRM on this card also helps.
 
@BCav
Did you get your FS combined back up near 10k?
 
as for FS
 
Graphics Test 1
212.23 fps

Graphics Test 2
164.35 fps
 
Best I saw last night was
GT1 -213.75
GT2 -165.49
 
Mem @ +1660 Memv @1.55.  I do not think it is recommended to run 1.5v + on the vmem but I was monitoring pretty heavily - vmem temp mostly >49C~
Obvs walked the memory and voltage up step for step to eval perf/perf. Can do 1600 at 1.5 so really not worth 1.55 to do 1660 but we only live once so...
 
Only mem adjust I do is Classy tool FBVDD = MemV and PX1 memory slider. AB would only let me go to 1500 so back to PX1 for meh. I noticed that if you set mem overclock in PX1 it sets that value as limit in AB. IDK though AB was acting a fool last night. Lost my curves all that nonsense... It felt like the EVGA gods were angry with me for using AB with KPE. heh

@bcav you combined is back to where it needs to be. it was at 6800 last night.

When I was looking for comp scores of your CPU last night I found it difficult on account of you owning every reported score for your cpu from #1 to 200 lol. Maybe you broke the HOF single handedly
 

I tried overclocking with px1 last thing I did after testing 20-30 times with ab. No chance to even get anything to clock at all not even setting 110+. No chance. Basically instant lockup in FS.

Auto importing the curve from ab to px1 dont work either.. only the main dot you set from ab is correct. The rest is off.

So.. the average user trying to test the card using Px1 will think the card sucks.

AHowes
:/ double post atleast once a day.. this is getting old.

Like Me "So back to the drawing board. At least for Fire Strike"
I thought that double post or back to back post was your norm