bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 12:24:51
(permalink)
My Scan Score stated at +93 and now is only +78
post edited by bcavnaugh - 2019/04/15 12:29:40
|
TriOx
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2018/12/28 17:35:42
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 13:07:10
(permalink)
bcavnaugh
Nice Score and Welcome to the Forum.
Thanks bcavnaugh! I also owe you thanks for all your helpful posts. I just got back into benching after a long break and decided to hang up the X58 and go to the X299 Dark. This was quite a dizzying jump at first but this forum helped pull me through. I noticed we were only 3 points apart on Sat. and then after lots of trials I managed to stick a +140 and +1360 together and magically grabbed 100+ points. If I can figure out the Classified Tool problem on my Z390 then I suspect it might break 9750.
EVGA Z390 Dark #15 EVGA 2080Ti K|INP|N Edition #23 Intel i9 9900K 5.3/5.1AVX/4.8Ring G.Skill TZ Royal F4-4400C18D-16GTRS (A2 Layout) EVGA CLC-280 Cooler with Corsair ML-140 fans.
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 13:19:41
(permalink)
fragility_V1
KonaChan
any1 got any guesstimates on when new KP's might arrive?
Vince mentioned something in a Facebook post about stock coming in every* other week. So maybe next week? I'd subscribe to the product notification and follow EVGA and Jacob on twitter.
*Edit for grammar
Towards end of April.
|
mattlissy
New Member
- Total Posts : 54
- Reward points : 0
- Joined: 2012/06/13 05:24:32
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 14:03:15
(permalink)
Can a moderator delete my previous post? A Crazy error in the Picture I tried to attach!
|
Mcwrah
Superclocked Member
- Total Posts : 245
- Reward points : 0
- Joined: 2018/05/26 09:40:05
- Location: EU
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 14:08:52
(permalink)
mattlissy
Can a moderator delete my previous post? A Crazy error in the Picture I tried to attach!
You could try editing it and leave: please delete. haha, it would take some time to edit it with that huge link. edit: thanks Sajin.
post edited by Mcwrah - 2019/04/15 14:12:36
|
Sajin
EVGA Forum Moderator
- Total Posts : 49125
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 14:10:26
(permalink)
mattlissy
Can a moderator delete my previous post? A Crazy error in the Picture I tried to attach!
Deleted.
|
Mcwrah
Superclocked Member
- Total Posts : 245
- Reward points : 0
- Joined: 2018/05/26 09:40:05
- Location: EU
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 14:13:43
(permalink)
EVGA_JacobF
fragility_V1
KonaChan
any1 got any guesstimates on when new KP's might arrive?
Vince mentioned something in a Facebook post about stock coming in every* other week. So maybe next week? I'd subscribe to the product notification and follow EVGA and Jacob on twitter.
*Edit for grammar
Towards end of April.
Hey jacob, is there any info on EU stock of kingpin yet? Would love to get it.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 14:15:39
(permalink)
TriOx
bcavnaugh
Nice Score and Welcome to the Forum.
Thanks bcavnaugh! I also owe you thanks for all your helpful posts. I just got back into benching after a long break and decided to hang up the X58 and go to the X299 Dark. This was quite a dizzying jump at first but this forum helped pull me through.
I noticed we were only 3 points apart on Sat. and then after lots of trials I managed to stick a +140 and +1360 together and magically grabbed 100+ points. If I can figure out the Classified Tool problem on my Z390 then I suspect it might break 9750.
You are Welcome. You should really do well on your Z390. I still have a ways to go on my Overclocking myself. I was thinking of taking my card out of my X299 and putting it in my Z370 because I can run at 5.1GHz on the CPU. I am really only good up to 4.9GHz on my X299.
post edited by bcavnaugh - 2019/04/15 14:23:43
|
Xero717
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2012/03/29 05:47:53
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 14:38:19
(permalink)
HawkOculus
Fellow Kingpin owners, what are your gaming clocks like? I’ve pushed the core from 90 to 115 in some gaming benchmarks and my clocks still level out at about 2100 MHz. No major fluctuations at all, though.
This kind of lines up with what TiN said in his guide, however. I’m getting a considerable performance boost with those core clocks and +1000 on the memory. I’d go higher on memory but some of the games I play can be finicky sometimes.
My clocks lock at 2130mhz gaming with 900 mem, but i have to lock the voltage in the classified tool at 1.093 and make sure the temps stay below 47, otherwise it kicks down to 2115. I haven't tinkered with memory voltage yet to see if i can get higher. Benching the highest I've got is 2160 during Timespy extreme with 1000 on memory. Funny how benches can clear at higher clocks than games do...
|
Deficatus
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2019/02/13 17:16:34
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 17:27:15
(permalink)
bcavnaugh
I Do Not Recommend this Tool.
Also It seem to be just be a Big AD for ASUS IMO.
No real use for our Graphics Cards.
Thank you for the advice, I will ditch RealBench. I bought 3Dmark this weekend and managed to get a decent score on Firestrike Extreme 3dmark.com/fs/19068976 +1490 Mem/+120 Core(2175). No classified tool yet. But I did also get 4 of those Phobya shrouds and gaskets for my radiator in push pull with 4 noctua ippc fans in anticipation for this card coming out.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/15 17:35:50
(permalink)
Deficatus
bcavnaugh
I Do Not Recommend this Tool.
Also It seem to be just be a Big AD for ASUS IMO.
No real use for our Graphics Cards.
Thank you for the advice, I will ditch RealBench. I bought 3Dmark this weekend and managed to get a decent score on Firestrike Extreme 3dmark.com/fs/19068976
+1490 Mem/+120 Core(2175). No classified tool yet. But I did also get 4 of those Phobya shrouds and gaskets for my radiator in push pull with 4 noctua ippc fans in anticipation for this card coming out.
 3DMark is not one or the other and we can compare between each others scores and so on.
post edited by bcavnaugh - 2019/04/15 17:40:24
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 03:04:50
(permalink)
Xero717
HawkOculus
Fellow Kingpin owners, what are your gaming clocks like? I’ve pushed the core from 90 to 115 in some gaming benchmarks and my clocks still level out at about 2100 MHz. No major fluctuations at all, though.
This kind of lines up with what TiN said in his guide, however. I’m getting a considerable performance boost with those core clocks and +1000 on the memory. I’d go higher on memory but some of the games I play can be finicky sometimes.
My clocks lock at 2130mhz gaming with 900 mem, but i have to lock the voltage in the classified tool at 1.093 and make sure the temps stay below 47, otherwise it kicks down to 2115. I haven't tinkered with memory voltage yet to see if i can get higher. Benching the highest I've got is 2160 during Timespy extreme with 1000 on memory. Funny how benches can clear at higher clocks than games do...
I’m finding very similar. My clocks lock at 2100 in games with +1000 memory and +90 core. I’ll get a slight downtick to 2080 in less intensive games or if temperatures get into the mid-fifties (which does happen). I made some curve adjustments across the board and that solves that issue. I haven’t touched the Classified tool at all yet.
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 08:38:48
(permalink)
Anyone done push/pull with the Kingpin stock radiator yet? If so, what are your temps like? I just got two new Noctua NF-A12s and I’m wondering if two additional fans for push/pull would even be worth it.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 08:58:54
(permalink)
I am somewhat, Temps on the GPU 48C Max & Memory 56C Max @ 2175-2190MHz
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 09:19:34
(permalink)
HawkOculus
Anyone done push/pull with the Kingpin stock radiator yet? If so, what are your temps like? I just got two new Noctua NF-A12s and I’m wondering if two additional fans for push/pull would even be worth it.
Put those new fans as push and move the stock fans to pull.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 09:21:26
(permalink)
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 09:24:55
(permalink)
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 09:50:41
(permalink)
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 09:55:16
(permalink)
AHowes
HawkOculus
Anyone done push/pull with the Kingpin stock radiator yet? If so, what are your temps like? I just got two new Noctua NF-A12s and I’m wondering if two additional fans for push/pull would even be worth it.
Put those new fans as push and move the stock fans to pull.
I’ll give it a try and report back. I really hate installing fans with longer screws on the intake side, though. Major pain in the butt.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 10:01:11
(permalink)
HawkOculus
AHowes
HawkOculus
Anyone done push/pull with the Kingpin stock radiator yet? If so, what are your temps like? I just got two new Noctua NF-A12s and I’m wondering if two additional fans for push/pull would even be worth it.
Put those new fans as push and move the stock fans to pull.
I’ll give it a try and report back. I really hate installing fans with longer screws on the intake side, though. Major pain in the butt.
You gota cut screws? Yeah a pain. If the screw is close to the rad afterwards use a washer or 2 to not hit the rad fins. Back on the day I always used a dremel to cut screws to length and it would suck to need to file the end to clean the threads.. Now I just use a wire cutter that has a screw cutter on it for different sized screws.. trim to size and when you back the screw out it fixes the screw threads at the cut. Much easier haha.
post edited by AHowes - 2019/04/16 10:03:26
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10333
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 10:06:22
(permalink)
HawkOculus
Anyone done push/pull with the Kingpin stock radiator yet? If so, what are your temps like? I just got two new Noctua NF-A12s and I’m wondering if two additional fans for push/pull would even be worth it.
Replace the stock fans with those Noctuas.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 11:15:42
(permalink)
AHowes
HawkOculus
AHowes
HawkOculus
Anyone done push/pull with the Kingpin stock radiator yet? If so, what are your temps like? I just got two new Noctua NF-A12s and I’m wondering if two additional fans for push/pull would even be worth it.
Put those new fans as push and move the stock fans to pull.
I’ll give it a try and report back. I really hate installing fans with longer screws on the intake side, though. Major pain in the butt.
You gota cut screws? Yeah a pain. If the screw is close to the rad afterwards use a washer or 2 to not hit the rad fins.
Back on the day I always used a dremel to cut screws to length and it would suck to need to file the end to clean the threads..
Now I just use a wire cutter that has a screw cutter on it for different sized screws.. trim to size and when you back the screw out it fixes the screw threads at the cut. Much easier haha.
Nah, I’ve got long screws with washers that’ll work. I just absolutely hate trying to get the fan mounted to both the radiator and the case bracket as is required with push pull. It’s easier if the case has a removable mount but my front mounting areas don’t have that. I’m probably gonna just go with the Noctuas mounted in a pull scenario. My Kingpin already doesn’t fluctuate much at all clockwise with heat soaked loads, so I’m really just looking for improved performance over the stock fans with the Noctuas.
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 11:17:05
(permalink)
GTXJackBauer
HawkOculus
Anyone done push/pull with the Kingpin stock radiator yet? If so, what are your temps like? I just got two new Noctua NF-A12s and I’m wondering if two additional fans for push/pull would even be worth it.
Replace the stock fans with those Noctuas.
Yessir, that’s the plan.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 11:28:50
(permalink)
|
Zeddivile
SSC Member
- Total Posts : 761
- Reward points : 0
- Joined: 2017/09/30 11:15:15
- Location: @ the tipity top of FPS mountain
- Status: offline
- Ribbons : 7
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 12:09:20
(permalink)
I put the IPPC Noctua's on the front of the KPE in push orientation and moved the EVGA fans to pull.Will probably swap out the evga's if it takes a while for the KPE Hydrocopper to release... Temps @ clocks 2190/1050 Firestrike extreme load - GPU 46 MEM 52 Temps @clocks stock/stock Gaming - Apex & Metro GPU 40 MEM 46 *Note that case is terrible for airflow but 3 Noctua 140's, Noctua 120's and the 3 bequiet 140's mitigate the issue at the cost of noise... TLDR the EVGA 240 CLC KPE does an excellent job and I am skeptical of my custom loop doing much better without the chiller. And that loop is a what I would consider larger... Nemesis 360 GTX with 6IPPC Noctua industrial and a Nemesis GTS 420 with 3 bequiet 140's / 3 Noctua IPPC 140's, D5 ect... Time will tell
post edited by Zeddivile - 2019/04/16 12:20:39
"This stuff breaks my tiny often dehydrated and carb deprived hamster brain" -2019  
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 12:19:53
(permalink)
Zeddivile
I put the IPPC Noctua's on the front of the KPE in push orientation and moved the EVGA fans to pull.Will probably swap out the evga's if it takes a while for the KPE Hydrocopper to release...
Temps @ clocks 2190/1050
Firestrike extreme load -
GPU 46
MEM 52
Temps @clocks stock/stock
Gaming - Apex & Metro
GPU 40
MEM 46
Any Links to your Scores?
|
Zeddivile
SSC Member
- Total Posts : 761
- Reward points : 0
- Joined: 2017/09/30 11:15:15
- Location: @ the tipity top of FPS mountain
- Status: offline
- Ribbons : 7
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 12:27:45
(permalink)
ya back up a few posts I linked a HOF score for firestrike extreme Hof #46 - https://www.3dmark.com/fs/19030890 I am waiting to run the entire gauntlet of benchmarks until the KPE HC arrives at my door. Just ran the FSX to verify card could clock decent and mem was scaling- Gunna go throw the KPE on the bench /Chiller and marathon an OC session at that point. Will probably push the 9900K as far as I can ditching the Z390 master for the z390 dark...
post edited by Zeddivile - 2019/04/16 13:12:40
"This stuff breaks my tiny often dehydrated and carb deprived hamster brain" -2019
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 12:38:50
(permalink)
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 12:42:47
(permalink)
Zeddivile
ya back up a few posts I linked a HOF score for firestrike extreme
Hof #46 - https://www.3dmark.com/fs/19030890
@bcavnaugh Just because i'm up in the mountains doesn't mean you should ignore my links;o)
Nice score.. I dont know about any tweaks people do to help get good scores.. but with my system at the same 5.2ghz and 4266 mem and ftw3 running at 2190/8450 scores 18.5k+. So guessing that's the kingpin extra benchmark performance.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
XrayMan
Insert Custom Title Here
- Total Posts : 63846
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/16 12:59:02
(permalink)
Just a reminder this thread is about the Kingpin. Not the FTW3. Please stay on topic. Thanks.
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A   
|