rodarkone
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2016/02/02 12:56:57
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:14:20
(permalink)
dwexpress ... I can get mine to +130 core clock and +1250 memory clock without even using the classified tool. Best i can get with the classified tool is +140 core clock and +1300 memory clock.
What's your max core ? as I can do the same ... Also I got a "flagged" today that it may that the voltages applied via classified are not appling correctly as the temp on the card are low :) - So my question is what are your voltage to temp ratio ? ex: with 1.06 - 50 C with 1.096 - 55 with 1.11 - 60 C ETC
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:20:24
(permalink)
I'm pretty much about the same as what your showing, if i increase the voltages with the classy tool my benchmark scores drop pretty quick, my best scores and stability are without the use of the classy tool.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:31:25
(permalink)
The classy tool has always worked better the closer the core is to 0c and below. Even a water block isn’t going to get the temps much lower than the 240 AIO unless you add a chiller into the loop to lower the temps below ambient.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:36:39
(permalink)
Yeah these 240mm AIO are a good setup, i'm not thinking a full cover block will do much better, but the options for your system's loop would be better with the block for sure.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:40:16
(permalink)
|
rodarkone
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2016/02/02 12:56:57
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:43:06
(permalink)
Is only the GPU or you are pushing memory hard, I think they mention some correction is there so if you got micro errors, the data is resent, lowering the actual. (check the actual clocks as I noticed even if you set the ovk high, the actuals are lower - ex set core to +150 (on bases 2020 MHz) /instead of 2170 MHz the actual was ~ 1800 MHz )
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:43:16
(permalink)
I'm pretty much settled at +1240 and +120 on mine for the best stability and constant benchmark scores. Seems to be the sweet spot for my card anyways.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 17:49:37
(permalink)
@ +150 on the GPU and +1000 on the Memory Benching @ 2205MHz Now. I guess I could up the Memory but really T only see DX12 or Time Spy Scores go up. Fire Strike Crashes @ 2205MHz, Running 3DMarks 11 now and Crashes as well. Back Down to (2,175 MHz) and (2,190 MHz) for now. View System
post edited by bcavnaugh - 2019/04/12 18:00:03
|
richiec77
New Member
- Total Posts : 53
- Reward points : 0
- Joined: 2014/10/28 19:36:52
- Location: Lone Star
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 18:02:29
(permalink)
What LLC/Droop level was used? Default is 10 and causes more sag than using say level 4-5.
I'll have it on the bench again soon. Get some DMM readings to see what the card does without using the Classy tool.
|
rodarkone
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2016/02/02 12:56:57
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 18:24:44
(permalink)
@bcavnaugh - I don't think your card is going so high - look at my result (just bellow yours as my CPU refuses to cooperate - are you using any "tweak" for CPU test?) as I am getting more FPS and my clock is not going >2160 MHz
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 18:28:06
(permalink)
rodarkone @bcavnaugh - I don't think your card is going so high - look at my result (just bellow yours as my CPU refuses to cooperate - are you using any "tweak" for CPU test?) as I am getting more FPS and my clock is not going >2160 MHz
None on the CPU, just OC in the Bios. But we have seen the same before on other RTX Cards. "just bellow yours" looking now for this Score. You can posts links to your Scores but for now you need to leave off the https:// Added my last run with the Memory @ +1200 https://www.3dmark.com/compare/fs/19039242/fs/19039360/fs/19039433/fs/19039546/fs/19039810/fs/19040045
post edited by bcavnaugh - 2019/04/12 18:30:35
|
AMezzulo
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2004/09/22 16:01:40
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 18:35:39
(permalink)
Is there a newb guide out there or someone willing to explain to me what exactly i should be tweaking in the classified tool? And its use in combination with MSI AfterBurner/EVGA precision X1?
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 18:57:18
(permalink)
AMezzulo Is there a newb guide out there or someone willing to explain to me what exactly i should be tweaking in the classified tool? And its use in combination with MSI AfterBurner/EVGA precision X1?
See Candies for RTX 2080 Ti Kingpin & TiN_EE RTX KPE Tech guide is out. If you have any questions, feel free to ask in OC section.
|
rodarkone
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2016/02/02 12:56:57
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 19:00:13
(permalink)
@bcavnaugh - I was referring to this one
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 19:01:17
(permalink)
rodarkone @bcavnaugh - I was referring to this one
You have to leave off the https:// or your link will be deleted. You need like 11 or more posts before you can post links
|
rodarkone
New Member
- Total Posts : 64
- Reward points : 0
- Joined: 2016/02/02 12:56:57
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 19:10:12
(permalink)
ehh .. is easy to find what I am talking - just go to any of your results / click on show result details / then click on the colums (this will filter scores by the same system CPU + GPU) then just cliick on number of GPU's = 1 .. and the scores will be: RESULTS 242 RESULTS FOUND. DISPLAYING 87 RESULTS: 1. 29497 Fire Strike (1.1) by masamune.dono March 15 2019 Intel Core i9-7920X Processor (2,900 MHz) Details NVidia Corporation NVIDIA GeForce RTX 2080 Ti (2,130 MHz) Add to compare 2. 29417 Fire Strike (1.1) by bcavnaugh April 12 2019 X299-Dark-RTX-K|NGP|N Intel Core i9-7920X Processor (2,900 MHz) Details EVGA Corporation NVIDIA GeForce RTX 2080 Ti (2,175 MHz) Add to compare 3. 29387 Fire Strike (1.1) by rodarkone April 13 2019 Intel Core i9-7920X Processor (2,900 MHz) Details EVGA Corporation NVIDIA GeForce RTX 2080 Ti (2,175 MHz) Add to compare
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 19:18:15
(permalink)
So I got my card installed. Amazing product. But my benchmarks are stupidly low for the OC I have set right now: I can't get the stupid link to work. My TimeSpy score isn't even 13,000. What the hell? I have +1000 on the memory and +50 on the core and my scores are that low. The only other thing I did is up the power limit to 144%. My Strix OC that is being replaced scored over 16,000 with its best OC. What's the deal? I have the radiator and fans mounted as front intake. I have another AIO exhausting out of the top of the case. One case fan in the back is exhausting air. I am using multiple monitors but that shouldn't affect anything I wouldn't think. Also, I keep getting a weird error when I'm benching. The OLED tells me "+12V input too high". How can that be possible? I have power hooked up with 2 8 pins and another 8 pin as 6+2. I don't get it. I'm using a 1000 watt EVGA P2 power supply. Any advice that anyone can offer?
post edited by HawkOculus - 2019/04/12 19:22:37
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 19:31:57
(permalink)
HawkOculus So I got my card installed. Amazing product. But my benchmarks are stupidly low for the OC I have set right now: I can't get the stupid link to work. My TimeSpy score isn't even 13,000. What the hell? I have +1000 on the memory and +50 on the core and my scores are that low. The only other thing I did is up the power limit to 144%. My Strix OC that is being replaced scored over 16,000 with its best OC. What's the deal? I have the radiator and fans mounted as front intake. I have another AIO exhausting out of the top of the case. One case fan in the back is exhausting air. I am using multiple monitors but that shouldn't affect anything I wouldn't think. Also, I keep getting a weird error when I'm benching. The OLED tells me "+12V input too high". How can that be possible? I have power hooked up with 2 8 pins and another 8 pin as 6+2. I don't get it. I'm using a 1000 watt EVGA P2 power supply. Any advice that anyone can offer?
You may want to create your own Thread to get some extra help. Post your links to your Scores and leave off the https://
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 19:48:09
(permalink)
bcavnaugh
You may want to create your own Thread to get some extra help. Post your links to your Scores and leave off the https://
I posted a new thread with the info you need to get to the TimeSpy links. I'd appreciate any help. Really frustrated right now.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 20:56:55
(permalink)
|
Xero717
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2012/03/29 05:47:53
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 21:04:55
(permalink)
When you guys are hitting upper 2100s and 2200, are you using a 4k resolution monitor? I'm stuck at 2130mhz with mine even with the voltage mostly stabilized with the classified tool. Scores are what the OC guide predicts, but I can't help but be disappointed that i'm experiencing driver crashes at 2145mhz no matter how far the voltage is pushed with the power limit maxed. Edit: Just to clarify i'm no where even close to hitting the power limit
post edited by Xero717 - 2019/04/12 21:11:25
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 21:06:00
(permalink)
Xero717 When you guys are hitting upper 2100s and 2200, are you using a 4k resolution monitor? I'm stuck at 2130mhz with mine even with the voltage mostly stabilized with the classified tool. Scores are what the OC guide predicts, but I can't help but be disappointed that i'm experiencing driver crashes at 2145mhz no matter how far the voltage is pushed with the power limit maxed.
Post some links to your Scores.... 4k resolution monitor? Really makes no difference with the Benchmark running at the Default Settings of the Benchmark. For me No I am not YET! running at 4K Monitor. I am NOT using the "Classified Tool"
post edited by bcavnaugh - 2019/04/12 21:09:18
|
Xero717
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2012/03/29 05:47:53
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 21:21:44
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 21:49:14
(permalink)
|
degenerate
SSC Member
- Total Posts : 614
- Reward points : 0
- Joined: 2013/08/23 05:38:31
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/12 21:55:24
(permalink)
GTXJackBauer
jasonzliang So how does the pump sound on the kingpin?
One user already said it was quiet. Would be nice to hear from more Kingpin customers.
I guess it depends on what people consider to be quiet. Mine isn't 'quiet' but it isn't 'loud' either, I sit very close to my case (within 2ft & at shoulder level) and with my rad fans @ 1000rpm the KPE pump can be heard pretty easily (though still not terribly bothersome) but that's because the fans make almost no noise at that speed. Once I'm up around 1600rpm on rad fans it pretty much drowns out the KPE pump. I assume pump is running full speed and I haven't tried to adjust it (haven't even looked to see if it's possible). Unfortunately I've never had a FTW3/XC2 Hybrid that I can compare it to.
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/13 05:01:58
(permalink)
|
HawkOculus
iCX Member
- Total Posts : 456
- Reward points : 0
- Joined: 2019/04/10 10:50:51
- Status: offline
- Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/13 05:58:09
(permalink)
What fans did you guys end up with? My fans look different than the ones they were using for the promotional material. Last minute change in what shipped with these cards? I'll be continuing to tinker with mine this weekend. Really happy with it so far.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!
2019/04/13 06:01:42
(permalink)
My fans are 2 black fans on the radiator and a black dimple fan on the card itself, thats what is showing on the promo's as far as i can tell.
|
skonkmonkey
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 2018/11/27 15:16:18
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
2019/04/13 06:29:02
(permalink)
I know there will be a hydro block, but im curious if it will be block only or will they sell actual hydro card?
|
Mcwrah
Superclocked Member
- Total Posts : 245
- Reward points : 0
- Joined: 2018/05/26 09:40:05
- Location: EU
- Status: offline
- Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE!
2019/04/13 06:42:29
(permalink)
skonkmonkey I know there will be a hydro block, but im curious if it will be block only or will they sell actual hydro card?
As far as I know, they said there will only be hydro block, no hydro card version because of limited supply (or so I heard). Might not be true tho.
|