ironbrillopad
I too own the Galax HOF OC lab wc. How were you able to get your hands on the custom bios?

Welcome to the Forum.
Who has a Custom Bios?
Are you going to install a Galax HOF OC lab wc Bios on your EVGA GeForce RTX 2080 Ti K|NGP|N Graphics Card?

AHowes

dwexpress
Oh gosh, just got my other kingpin installed and can't even sli it yet. My previous board was the Asus Rampage VI Apex and when it went in to be RMA'd i ended up getting the Asus Rampage VI Extreme Omega to replace it. I had the nvlink 4 space while using the Apex now i didn't even notice till now the Omega needs the 3 space nvlink. Ughhhhh.

That's gota hurt!

Hopefully ya got a microcenter or frys near by and can get one locally.

No nothing like that here by me, i ordered one from Amazon to be here on Tuesday.

JDauwalter
I would love that 240mm radiator on the kingpin edition for my 2080 Ti hybrid FTW3. Are we going to be able to purchase that at some point? I find this 120mm radiator just isn't good enough. With good fans, it stays at 66C, but I want it below 60C if possible.

Be nice but I'm sure they want the kingpin to have a clear advantage in power and cooling.

Slap a hydro copper block on her and smile. Then you can have whatever radiator ya want.

It would be nice if they allowed their customers to choose between the cost of a 120mm or 240mm like those GPU brackets from NZXT and Corsair.

What’s the ETA for the Kingpin card to be back in stock?

This year K|NGP|N is far better than Matrix from ASUS. They presented before few months 
but still didn't launched him. I would not surprise if they have some temperature or technical problems with innovative approach they presented.
 
Matrix RTX2080Ti could be better than Strix, but most important part of closed liquid cooling systems is installation of radiator in exhaust configuration.
Than practically 90% of all heat from GPU go out of case and save money on case fans. I never believed so much in case fans to help with air cooled graphic card, special hot high end overclocked models. AIO or waterblock are must have.
 
I don't know how people with deeper budget think but I would rather pay more for this kind of GPU and upgrade later than to buy every series of reference model.
This is nicest K|NGP|N for me. Probably because I start to buy AIO CPU coolers from beginning and because temperatures are better than air cooled cards.
 
Good option for EVGA RTX2080Ti K|NGP|N is installation of two Noctua NF-A12x25 PWM, 2000 RPM.
Noctua offer and small fan controller NA FC1 for 3 fans and have extension.
He could stay out of PC case and when you play games you increase fan speed on 2000 RPM.
Believe me it's not noisy at all and air pressure is amazing. They will drop temperatures for 3-4C maybe even 5 for sure compare to other fans.
 
 

Fellow Kingpin owners, what are your gaming clocks like? I’ve pushed the core from 90 to 115 in some gaming benchmarks and my clocks still level out at about 2100 MHz. No major fluctuations at all, though.

This kind of lines up with what TiN said in his guide, however. I’m getting a considerable performance boost with those core clocks and +1000 on the memory. I’d go higher on memory but some of the games I play can be finicky sometimes.

mine comes today cant wait to see how mine stacks up! to say im eagerly awaiting the UPS man is a supreme understatement. im half tempted to drive around town looking for him

dwexpress

HawkOculus
Fellow Kingpin owners, what are your gaming clocks like? I’ve pushed the core from 90 to 115 in some gaming benchmarks and my clocks still level out at about 2100 MHz. No major fluctuations at all, though.

This kind of lines up with what TiN said in his guide, however. I’m getting a considerable performance boost with those core clocks and +1000 on the memory. I’d go higher on memory but some of the games I play can be finicky sometimes.

The sweet spot on mine for stability and best benchmarks seems to be +120 clock and +1240 memory.

What are your core clocks like during actual gameplay? Where do they stabilize out when your card is pretty well heat soaked?

dwexpress

HawkOculus
Fellow Kingpin owners, what are your gaming clocks like? I’ve pushed the core from 90 to 115 in some gaming benchmarks and my clocks still level out at about 2100 MHz. No major fluctuations at all, though.

This kind of lines up with what TiN said in his guide, however. I’m getting a considerable performance boost with those core clocks and +1000 on the memory. I’d go higher on memory but some of the games I play can be finicky sometimes.

The sweet spot on mine for stability and best benchmarks seems to be +120 clock and +1240 memory.

I'm getting +115 GPU and +1350 memory if I up the memory voltage to 1.45 V.  Any other tweaks you guys have been making to the other voltage settings in the Classified tool?

fragility_V1

dwexpress

HawkOculus
Fellow Kingpin owners, what are your gaming clocks like? I’ve pushed the core from 90 to 115 in some gaming benchmarks and my clocks still level out at about 2100 MHz. No major fluctuations at all, though.

This kind of lines up with what TiN said in his guide, however. I’m getting a considerable performance boost with those core clocks and +1000 on the memory. I’d go higher on memory but some of the games I play can be finicky sometimes.

The sweet spot on mine for stability and best benchmarks seems to be +120 clock and +1240 memory.

I'm getting +115 GPU and +1350 memory if I up the memory voltage to 1.45 V.  Any other tweaks you guys have been making to the other voltage settings in the Classified tool?

I'm not even using the classified tool.

HawkOculus
Fellow Kingpin owners, what are your gaming clocks like? I’ve pushed the core from 90 to 115 in some gaming benchmarks and my clocks still level out at about 2100 MHz. No major fluctuations at all, though.

This kind of lines up with what TiN said in his guide, however. I’m getting a considerable performance boost with those core clocks and +1000 on the memory. I’d go higher on memory but some of the games I play can be finicky sometimes.

For gaming I've been stable at 2130MHz with +600 on memory... I used to be stable at 2160MHz with +800 on memory, but for some reason that is no longer

the_Scarlet_one
What are all of your actual clocks. 99% of cards are not at the same base numbers after GPU Boost, so +125 could mean a large variance in actual clocks.

Benching at 2130 MHz on the GPU, 2,088 MHz on the memory bus clock (+1350)

KonaChan
any1 got any guesstimates on when new KP's might arrive?

Vince mentioned something in a Facebook post about stock coming in every* other week.  So maybe next week?  I'd subscribe to the product notification and follow EVGA and Jacob on twitter.
 
*Edit for grammar

Nice Score TriOx and Welcome to the Forum.
https://www.3dmark.com/pr/78687
https://www.3dmark.com/compare/pr/78687/pr/77850