Dabadger84
CLASSIFIED Member
- Total Posts : 3426
- Reward points : 0
- Joined: 2018/05/11 23:49:52
- Location: de_Overpass, USA
- Status: offline
- Ribbons : 10
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 18:29:41
(permalink)
EVGA_JacobF
So once they're more actively in production, the notify me button will appear & be there to stay, sounds like.
Yes
Bit of a tech-spec question cuz I didn't see it on the product page, what's the tube length on these Hybrid kits/cards? Standard 400mm, less, or more?
ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891 Specs:5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 18:40:28
(permalink)
|
Bearmageddon
Superclocked Member
- Total Posts : 119
- Reward points : 0
- Joined: 2016/06/30 11:33:39
- Status: offline
- Ribbons : 0
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 19:10:03
(permalink)
Dabadger84 I am anticipating not getting one til February now. lol
Same, my new build will be nearly 6 months old by then, while having never been turned on. :')
Lian Li O11D XLGigabyte Z490 AORUS Masteri5-10600K @ 4.9GHz3090 FTW3 Ultra (HydroCopper Coming Soon™)32GB G.Skill TridentZ RGB DDR4 @3600 Corsair MP600 2TB M.2 ALL THE SSDs!!!
|
JDauwalter
Superclocked Member
- Total Posts : 181
- Reward points : 0
- Joined: 2005/03/12 02:26:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 19:24:04
(permalink)
Dabadger84
yaggaz
EVGA_JacobF Notify button will be back up when product is actively shipping, was limited initial batch shipping in early December. More on the way.
Thank you for speaking to your customers directly, it's always appreciated. But what does this mean? Are you saying the Auto-notify button will stay up permanently once the current batch is shipping?
So once they're more actively in production, the notify me button will appear & be there to stay, sounds like. I am anticipating not getting one til February now. lol
I guess in the long run this will save me money. I was ready to plop down 1800 on a hybrid 3090 now, but the 3080 Ti might be out then and I'll get that instead if possible. Lol
|
Cableguy696969
iCX Member
- Total Posts : 340
- Reward points : 0
- Joined: 2010/06/17 14:12:45
- Location: Brooklyn, NY
- Status: offline
- Ribbons : 3
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 19:29:47
(permalink)
The notify buttons are sold out
Maximus XII Formula | Core i9 10900k @ 5.3Ghz all cores | 16GB G.Skill DDR4 4400mhz | EVGA RTX 3080 FTW3 Ultra | ROG Thor 1200W | ROG PG35VQ
|
ThoriumOC
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2019/08/07 22:24:12
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 20:45:33
(permalink)
Wait, so did the standalone kits become available today and sell out? or has it just been on notify. Does anyone know
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6780
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: online
- Ribbons : 76
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 20:49:12
(permalink)
ThoriumOC Wait, so did the standalone kits become available today and sell out? or has it just been on notify. Does anyone know
Notify only AFAIK. I got in on the notify for a FTW3 one when it first came up this morning. It went down around an hour later, then came back up again. Never saw any in stock.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 20:52:03
(permalink)
arestavo
ThoriumOC Wait, so did the standalone kits become available today and sell out? or has it just been on notify. Does anyone know
Notify only AFAIK. I got in on the notify for a FTW3 one when it first came up this morning. It went down around an hour later, then came back up again. Never saw any in stock.
Yeah auto notify is all I seen today as well
|
axtoxic
Superclocked Member
- Total Posts : 103
- Reward points : 0
- Joined: 2020/08/25 00:00:33
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 21:01:29
(permalink)
Auto notify button is gone
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 21:09:19
(permalink)
axtoxic Auto notify button is gone
It's still showing up for me right now
|
axtoxic
Superclocked Member
- Total Posts : 103
- Reward points : 0
- Joined: 2020/08/25 00:00:33
- Status: offline
- Ribbons : 0
回覆: Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 21:12:21
(permalink)
sparetimepc
axtoxic Auto notify button is gone
It's still showing up for me right now
I checked it again,but the button is still missing ![](https://forums.evga.com/upfiles/smiley/confused1.gif)
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6780
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: online
- Ribbons : 76
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: 回覆: Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 21:15:19
(permalink)
The Hybrid kits still have the auto notify button. The hybrid cards won't have that until later (Dec 7th?).
|
degenerate
SSC Member
- Total Posts : 614
- Reward points : 0
- Joined: 2013/08/23 05:38:31
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 21:30:22
(permalink)
Great.... I missed the notify list while at work... not much point in jumping in now. Enjoy your GPU's fella's!
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
|
skyline090
Superclocked Member
- Total Posts : 155
- Reward points : 0
- Joined: 2018/03/17 16:02:59
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 21:44:02
(permalink)
Custom loop w/EK blocks - 12900k, 4090 FE, z690 Apex, G.Skill DDR5 6600 c32, EVGA 1000 P6, Lian Li O11D XL
|
Yastiandrie
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2020/10/03 14:58:07
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 23:00:36
(permalink)
Any Hybrids coming to Australia?
|
evgauser28764
Superclocked Member
- Total Posts : 232
- Reward points : 0
- Joined: 2016/07/01 06:27:49
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 23:31:58
(permalink)
i am impressed by the pricings of hybrid cards. well done evga. now, seriously, what gen is the pump on xc3/ftw3? and can we finally be able to controll the pump speed through software this time? unlike what we have done for last generations like using adaptor to connect the pump cable and then plug that to mobo and use dc control to lower the pump speed, so as to get rid of that stupidly loud freaking pump noise?
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 23:34:51
(permalink)
I believe the pump is the same as the last series they just changed the size of the radiator on them.
|
degenerate
SSC Member
- Total Posts : 614
- Reward points : 0
- Joined: 2013/08/23 05:38:31
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 23:35:35
(permalink)
evgauser28764 what gen is the pump on xc3/ftw3? and can we finally be able to controll the pump speed through software this time? unlike what we have done for last generations like using adaptor to connect the pump cable and then plug that to mobo and use dc control to lower the pump speed, so as to get rid of that stupidly loud freaking pump noise?
I'm going to assume same pump as in previous generation Hybrids. Also safe to assume we still have no pump-speed control.
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
|
evgauser28764
Superclocked Member
- Total Posts : 232
- Reward points : 0
- Joined: 2016/07/01 06:27:49
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/13 23:39:35
(permalink)
degenerate
evgauser28764 what gen is the pump on xc3/ftw3? and can we finally be able to controll the pump speed through software this time? unlike what we have done for last generations like using adaptor to connect the pump cable and then plug that to mobo and use dc control to lower the pump speed, so as to get rid of that stupidly loud freaking pump noise?
I'm going to assume same pump as in previous generation Hybrids. Also safe to assume we still have no pump-speed control.
after all these years since maxwell, after so many complaints all over the internet.... btw, the vrm cooling part is missing on the product page, even the hyrbid kit has no vrm heatsink shown on the accessories picture, interesting.
|
Infin1tum
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2020/06/14 03:33:07
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 01:14:19
(permalink)
Will the standalone HC Block be available to purchase for the aircooled FTW3 owners? I just found the Hybrid kit on the US shop. Nothing at all yet on EU side ofc.
|
degenerate
SSC Member
- Total Posts : 614
- Reward points : 0
- Joined: 2013/08/23 05:38:31
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 01:15:34
(permalink)
Infin1tum Will the standalone HC Block be available to purchase for the aircooled FTW3 owners? I just found the Hybrid kit on the US shop. Nothing at all yet on EU side ofc.
Should be, has been in years past.
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
|
Infin1tum
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2020/06/14 03:33:07
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 01:24:30
(permalink)
degenerate
Infin1tum Will the standalone HC Block be available to purchase for the aircooled FTW3 owners? I just found the Hybrid kit on the US shop. Nothing at all yet on EU side ofc.
Should be, has been in years past.
i hope so. honestly, this thing looks so good and the red line fits so perfectly for my build. If it performs as good as the ek block, this will be the one i go for 100%. Too bad the EK is not OEM for those anymore. I've heard some mixed reviews about the 20 series blocks. Can't go wrong with EK.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10332
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 01:46:56
(permalink)
ThoriumOC Wait, so did the standalone kits become available today and sell out? or has it just been on notify. Does anyone know
EVGA Jacob stated during Friday's stream that the button will reappear once more are produced and shipped. evgauser28764 btw, the vrm cooling part is missing on the product page, even the hyrbid kit has no vrm heatsink shown on the accessories picture, interesting.
The HYBRID info here states they have heatsinks built into the shroud. Overall, I'm really happy with the pricing and all the tweaks they did with the HYBRIDs this gen including the memory cooling plate. Should see some amazing temps.
post edited by GTXJackBauer - 2020/11/14 01:52:02
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 01:55:17
(permalink)
Infin1tum Will the standalone HC Block be available to purchase for the aircooled FTW3 owners? I just found the Hybrid kit on the US shop. Nothing at all yet on EU side ofc.
I was thinking I seen somewhere that blocks wouldn't be available separate but maybe that was just initially, I could be wrong though, I have been several times in my life
|
SinisterGamer
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2011/06/02 13:06:23
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 04:43:05
(permalink)
Since I still haven't received a purchase link for my initial auto notify's for ANY of the cards 3080/3090 I didn't even bother. I do however have a microcenter near me and thats how I got my 3090xc3 UG. I am not a scalper but willing to help anyone get a card if I can.
|
Avenger411
SSC Member
- Total Posts : 632
- Reward points : 0
- Joined: 2012/11/16 06:55:25
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 04:55:21
(permalink)
I am wondering if i can give my notify position to someone ? I am on the notify @9:12:30amPT for le 3080xc3/ftw3 hybrids + hc. If i buy let’s say the ftw3 hybrid, can i still give the xc3 hybrid + hc spot to someone here ? Or can i buy all 3 of them and just resell them (their actual value, not scalping) to someone close to me in canada (montreal) ? Trying to help.
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 05:32:09
(permalink)
You can't give the spot to someone if you don't order it will just go to next in line. Or yes you can buy and sell at your own discression.
|
Avenger411
SSC Member
- Total Posts : 632
- Reward points : 0
- Joined: 2012/11/16 06:55:25
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 06:00:27
(permalink)
Is there anyway for me to hide my personnal infos on the bill when giving the back to a fellow evga member ? I believe they’ll want to register and for thst they need a proof of purchase but my address etc will be there and i don’t want that.
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 06:06:07
(permalink)
It's also possible that if you remove yourself from the auto notify for the cards you don't want that the notify button will come back for those cards. Then someone else can sign up. At least that's how I understand how it works for the hybrid cards since the auto notify was available until the incoming stock matched the # of notifications. So makes sense to me that if you remove yourself, the stock for that card would be available therefore the button will appear until someone signs up and then it would disappear again. Only way to know for sure is to test removing yourself from one card and seeing if the button comes back or not. If you decide to do that, I would let others know when you are removing yourself so that they can try to get the notification if it does come back.
post edited by eg1122 - 2020/11/14 06:11:33
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
Avenger411
SSC Member
- Total Posts : 632
- Reward points : 0
- Joined: 2012/11/16 06:55:25
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC
2020/11/14 06:09:28
(permalink)
Then if that’s the case this is what i will do since i really want the ftw3u (but was willing to buy xc3 or hc). Can anyone from customer support answer this ?
|