d4haxor
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 4/26/2015
- Status: offline
- Ribbons : 0
After upgrading my drivers today I can no longer put a negative voltage into Precision X1. It just turns the box red and doesn't undervolt. Anyone else had this issue after upgrading drivers? 3080 ti FTW 3 Ultra Gaming.  edit: turns out I'm stupid and confused the voltage and clock sliders.
post edited by d4haxor - Monday, October 17, 2022 11:38 PM
|
cezarL
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 8/23/2016
- Status: offline
- Ribbons : 0
Re: Can't undervolt after upgrading drivers to 522.25?
Monday, October 17, 2022 2:51 AM
(permalink)
For what it's worth, undervolting still works in Afterburner with the new drivers (3080 FTW3 Ultra 10GB).
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 5/20/2011
- Location: Florida
- Status: offline
- Ribbons : 14
Re: Can't undervolt after upgrading drivers to 522.25?
Monday, October 17, 2022 1:03 PM
(permalink)
You're right can't undervolt, 3090 Ti.
I didn't notice because I don't undervolt. If fact I increased voltage for overclocking.
Also, Afterburner would not undervolt for me.
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
cezarL
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 8/23/2016
- Status: offline
- Ribbons : 0
Re: Can't undervolt after upgrading drivers to 522.25?
Monday, October 17, 2022 2:09 PM
(permalink)
frankd3
Also, Afterburner would not undervolt for me.
Odd... Could it be that it (still) works for me because I had profiles saved in Afterburner from before? Yet I can still reset its settings and define a new undervolt curve as usual...
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 5/20/2011
- Location: Florida
- Status: offline
- Ribbons : 14
Re: Can't undervolt after upgrading drivers to 522.25?
Monday, October 17, 2022 2:27 PM
(permalink)
cezarL
frankd3
Also, Afterburner would not undervolt for me.
Odd...
Could it be that it (still) works for me because I had profiles saved in Afterburner from before?
Yet I can still reset its settings and define a new undervolt curve as usual...
Maybe I did it wrong. The slider at full left is zero offset. I tried entering negative numbers and "apply" won't activate. As soon as I moved off it changed back to zero. In settings I enabled voltage control to set my overclock. Maybe it's different for different cards.
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
d4haxor
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 4/26/2015
- Status: offline
- Ribbons : 0
Re: Can't undervolt after upgrading drivers to 522.25?
Monday, October 17, 2022 8:59 PM
(permalink)
frankd3
cezarL
frankd3
Also, Afterburner would not undervolt for me.
Odd...
Could it be that it (still) works for me because I had profiles saved in Afterburner from before?
Yet I can still reset its settings and define a new undervolt curve as usual...
Maybe I did it wrong.
The slider at full left is zero offset. I tried entering negative numbers and "apply" won't activate. As soon as I moved off it changed back to zero.
In settings I enabled voltage control to set my overclock.
Maybe it's different for different cards.
Yeah before the update I could put -200 as a voltage and the curve would adjust automatically in precision x1, now when I enter it it just turns red and doesn't apply. Oddly enough though I can still load up my old profile that has the curve already set.
|
d4haxor
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 4/26/2015
- Status: offline
- Ribbons : 0
Re: Can't undervolt after upgrading drivers to 522.25?
Monday, October 17, 2022 11:37 PM
(permalink)
Ok turns out I'm actually incredibly stupid and confused the voltage / clock sliders. It was the clock one I set to -200 to get the fan curve to set. Disregard this post.
|
HeavyHemi
Omnipotent Enthusiast
- Total Posts : 13887
- Reward points : 0
- Joined: 11/29/2008
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: Can't undervolt after upgrading drivers to 522.25?
Tuesday, October 18, 2022 0:39 PM
(permalink)
d4haxor
Ok turns out I'm actually incredibly stupid and confused the voltage / clock sliders. It was the clock one I set to -200 to get the fan curve to set. Disregard this post.
I see I waited long enough for the light bulb. The voltage slider goes from 0 to 100%. Back in olden times, it did actually have a milli-volt offset. Now it is just a percentage.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 5/20/2011
- Location: Florida
- Status: offline
- Ribbons : 14
Re: Can't undervolt after upgrading drivers to 522.25?
Tuesday, October 18, 2022 12:21 AM
(permalink)
HeavyHemi
I see I waited long enough for the light bulb. The voltage slider goes from 0 to 100%. Back in olden times, it did actually have a milli-volt offset. Now it is just a percentage.
That's embarrassing that I didn't see the percentage symbol but thanks for pointing that out.  But in Precision X1 it's a milli-volt offset right? That's what I mainly use at present.
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|