EVGA

Hot!EVGA GeForce RTX 3090 and 3080 HYBRID/HC

Page: < 12345.. > >> Showing page 5 of 60
Author
wes_b
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2017/03/29 04:05:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 06:14:35 (permalink)
When can we reasonably expect to see these on the EU store? Like the rest of the lineup around 2022?
brian91292
New Member
  • Total Posts : 29
  • Reward points : 0
  • Joined: 2017/04/08 19:46:39
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 06:32:18 (permalink)
It's looking more and more like I'm gonna actually buy an amd gpu this year... nvidia/evga have really dropped the ball. Quite pathetic tbh.
Infin1tum
New Member
  • Total Posts : 55
  • Reward points : 0
  • Joined: 2020/06/14 03:33:07
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 06:33:29 (permalink)
wes_b
When can we reasonably expect to see these on the EU store? Like the rest of the lineup around 2022?




You seem to have missed that the EU queue is already up and running. I signed up for notify right on release day and my FTW is going to arrive next tuesday. So probably a couple of weeks after the notify has been enabled there for the HC/Hybrid too. Just an estimation tho.
bjohannes1984
New Member
  • Total Posts : 30
  • Reward points : 0
  • Joined: 2017/03/08 05:44:16
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 06:36:38 (permalink)
Aside from compatibility with their respective cards, are the XC3 and FTW3 Hybrid kits the same in terms of performance? Ie. the XC3 block/pump/rad is the same as that in the FTW3, minus RGB fans?

Intel i7-10700K - MSI MAG Z490 Tomahawk - EVGA RTX 3080 XC3 Hybrid - 32GB G.SKILL DDR4 3600MHz
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 9089
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 45
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 06:46:34 (permalink)
bjohannes1984
Aside from compatibility with their respective cards, are the XC3 and FTW3 Hybrid kits the same in terms of performance? Ie. the XC3 block/pump/rad is the same as that in the FTW3, minus RGB fans?




Check my post here to see what differences I noticed so far.  Everything else looks to be the same.  Just different fans and shroud size of course.

***  Interested in a RTX 3090 KINGPIN / FTW3 / 3090 / 3080 / 3070?  ***
 
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
 
LMD3DNZM9LGK8GJ
z999z3mystorys
CLASSIFIED Member
  • Total Posts : 4237
  • Reward points : 0
  • Joined: 2008/11/29 06:46:22
  • Location: at my current location
  • Status: offline
  • Ribbons : 16
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 06:47:58 (permalink)
I'm thinking the differences in the FTW3/xc3 hybrids is mostly in the air cooled part of it (VRM Vram and such), and the water cooled-GPU cooled part is more or less the same.


 
 
HawkOculus
iCX Member
  • Total Posts : 425
  • Reward points : 0
  • Joined: 2019/04/10 10:50:51
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 06:59:36 (permalink)
Anyone have thoughts on how difficult it is to install one of these hybrid kits?
I love my 3090 FTW3 Ultra, but I don't necessarily love the fan noise compared to my Kingpin 2080 Ti.
I have never taken a card apart before, nor have I installed a hybrid kit like these. Is it difficult? My biggest concern is dealing with the bracket around the die, as well as the wires coming from the PCB (FTW3 has a few as far as I know). 
 
Edit: And do we know if the 3090 kit has a solution for the memory modules on the back of the PCB?
post edited by HawkOculus - 2020/11/14 07:01:52
badboy64
SSC Member
  • Total Posts : 699
  • Reward points : 0
  • Joined: 2006/06/05 15:11:40
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 07:42:19 (permalink)
So no stand alone HC GPU waterblock at all? I am not getting the Hybrid since it will not work in my case when I have 2 360 Rad, pump/reservoir combo in my case.

Processor Intel® Core™ i9 10900K CPU 3.7GHz@5.4ghz, Memory 32GB GSkill Trident Z RPG 3000 Ram, Sabrent Rocket Q4, Motherboard eVga Z490 FTW WiFi, Operating System Windows 10 Pro 64-Bit, eVga 3090 FTW3 Ultra 24G, Monitor Acer CG437K, Logitech G910, Razer Lancehead Tournament Edition,Thermaltake Core P8, eVga SUPERNOVA 1000 G3 PSU, Custom watercooling.
Time Spy Extreme eVga 3090 FTW3 Ultra
10322
http://www.3dmark.com/spy/16631417

Dabadger84
FTW Member
  • Total Posts : 1459
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 2
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 07:43:02 (permalink)
ThoriumOC
Wait, so did the standalone kits become available today and sell out? or has it just been on notify. Does anyone know




The standalone has a notify queue won't be shipping til December 7th.
 
The cards do not, yet.
 
badboy64
So no stand alone HC GPU waterblock at all? I am not getting the Hybrid since it will not work in my case when I have 2 360 Rad, pump/reservoir combo in my case.


 
They're coming, just not on the store yet, they are prioritizing HC blocks on cards right now.

Save up to 10% on eVGA.com purchases, use my Associates Code: 47AQQ6KPU2IZNXY
My system on ModRigs: https://www.modsrigs.com/detail.aspx?buildid=42454
System Specs (Brief Summary):
i9 9900k @ 5GHz - Gigabyte Z390 AORUS Master - eVGA 1200W P2 - 4x8GB G.Skill TridentZ @ 3600MHz CL16 1.35v (stock)
eVGA RTX 3090 FTW3 Ultra Hybrid - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

Ravena
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2015/12/23 18:28:17
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 07:44:54 (permalink)
Really want to know how long the tubing is cause every AIO i have or have seen are like an inch to an inch and a half too short to just bearly fit in most cases without it being top mounted
Timerider42
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2017/01/12 11:36:24
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 07:52:49 (permalink)
Disappointed there's no hybrid option with a 140mm radiator. I wanted something to replace my 1080 hybrid. I can't fit another 240mm radiator into my case without (another) complete overhaul.
Avenger411
SSC Member
  • Total Posts : 630
  • Reward points : 0
  • Joined: 2012/11/16 06:55:25
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:04:02 (permalink)
@ravena i think i saw jacob on twitter stating that the tubing was 400mm
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 9089
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 45
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:07:41 (permalink)
Avenger411
@ravena i think i saw jacob on twitter stating that the tubing was 400mm



That's correct.  The tubing length is 400mm long.

***  Interested in a RTX 3090 KINGPIN / FTW3 / 3090 / 3080 / 3070?  ***
 
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
 
LMD3DNZM9LGK8GJ
axtoxic
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2020/08/25 00:00:33
  • Status: offline
  • Ribbons : 0
回覆: Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:08:34 (permalink)
Avenger411
@ravena i think i saw jacob on twitter stating that the tubing was 400mm

I saw that too,and Jacob also mentioned that on the forum
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6140
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 48
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:11:12 (permalink)
Timerider42
Disappointed there's no hybrid option with a 140mm radiator. I wanted something to replace my 1080 hybrid. I can't fit another 240mm radiator into my case without (another) complete overhaul.


I'm pretty sure Jayztwocents (or Linus?) did a test with rad sizes and found that the 140 kept a 3090 FE card (370W?) about the same temperature as the stock cooler. So, my guess is that you might as well keep the stock heatsink assembly if you wanted to use a 140 radiator.

EVGA affiliate code: 9ZWDWFNW6A
(Don't forget to upload your invoice or no credit is given!)
 
FOLD ON
mphall
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2020/11/07 16:14:53
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:14:09 (permalink)
I've never done more than plug-in an air-cooled GPU and run it under stock settings.  This Christmas I'm putting a gaming system together with my son and earlier this week was able to purchase a XC3 Ultra through the notify queue.  I think he will be interested in tweaking the card just for the overclocking experience.
 
My question is, will there be any overclocking benefits for a XC3 with the hybrid kit installed?  I get that the card will run cooler, but from what I've read, it seems like the XC3 is power limited before its temperature limited.  Am I likely to see any performance boost?
post edited by mphall - 2020/11/14 08:16:15
Ravena
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2015/12/23 18:28:17
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:14:43 (permalink)
Avenger411
@ravena i think i saw jacob on twitter stating that the tubing was 400mm

then they haven't changed anything that is standard tube length 

i am just not sure how well it will fit in 011 dynamic xl side panel from what i could see and test with my 360, not very well or not be in optimal orination for an AIO
JimWindy
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2020/10/06 09:09:24
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:16:35 (permalink)
Is the signup/notify going back up?... Strange to have taken it down
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6140
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 48
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:18:11 (permalink)
mphall
I've never done more than plug-in an air-cooled GPU and run it under stock settings.  This Christmas, I'm putting a gaming system together with my son and earlier this week was able to purchase a XC3 Ultra through the notify queue.  I think he will be interested in tweaking the card just for the overclocking experience.
 
My question is, will there be any overclocking benefits for and XC3 with the hybrid kit installed?  I get that the card will run cooler, but from what I've read, it seems like the XC3 is power limited before its temperature limited.  Am I likely to see any performance boost?


Yes. The XC3 drops frequency bins more than the FTW3 does because of temperature, and the XC3 runs a lot warmer than the FTW3 due to a smaller heatsink.
 
With that said, it's not going to be a huge difference and silicon lottery still plays a big role. But the card will run cooler, and it will be a fun new challenge project for a father and son.
 
Just don't mount the pump above the radiator! A good explanation is here, and worth a watch: https://youtu.be/BbGomv195sk

EVGA affiliate code: 9ZWDWFNW6A
(Don't forget to upload your invoice or no credit is given!)
 
FOLD ON
mphall
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2020/11/07 16:14:53
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:19:51 (permalink)
arestavo
mphall
I've never done more than plug-in an air-cooled GPU and run it under stock settings.  This Christmas, I'm putting a gaming system together with my son and earlier this week was able to purchase a XC3 Ultra through the notify queue.  I think he will be interested in tweaking the card just for the overclocking experience.
 
My question is, will there be any overclocking benefits for and XC3 with the hybrid kit installed?  I get that the card will run cooler, but from what I've read, it seems like the XC3 is power limited before its temperature limited.  Am I likely to see any performance boost?


Yes. The XC3 drops frequency bins more than the FTW3 does because of temperature, and the XC3 runs a lot warmer than the FTW3 due to a smaller heatsink.
 
With that said, it's not going to be a huge difference. But the card will run cooler, and it will be a fun new challenge project for a father and son.
 
Just don't mount the pump above the radiator! A good explanation is here, and worth a watch: 




Excellent.  Thank you for the fast reply.
jacoffey85
New Member
  • Total Posts : 44
  • Reward points : 0
  • Joined: 2019/01/20 15:44:06
  • Location: USA
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:21:15 (permalink)
arestavo
Timerider42
Disappointed there's no hybrid option with a 140mm radiator. I wanted something to replace my 1080 hybrid. I can't fit another 240mm radiator into my case without (another) complete overhaul.


I'm pretty sure Jayztwocents (or Linus?) did a test with rad sizes and found that the 140 kept a 3090 FE card (370W?) about the same temperature as the stock cooler. So, my guess is that you might as well keep the stock heatsink assembly if you wanted to use a 140 radiator.


I think Linus did one video testing the new cards with 120/240/&360mm open loop configurations (only on the GPU). Big jump in cooling between 120mm and 240. Not that much between 240 & 360, but allows lower fan speeds.

His
R9-3950X @ 4.4 GHz || EVGA 3090 FTW3 || 32GB Corsair Dominator 3600CL14 || MSI Meg Ace X570 || Lian Li O11D XL || EKWB Custom Loop

Hers

i9-9900K @ 5.0 GHz || EVGA 2080Ti || 32GB Corsair Vengeance 3000CL14 || Asus Maximus Hero XI Z390 || Phanteks Evolv X  || EKWB Custom Loop
DaltonIQ
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2020/09/24 07:17:24
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:21:17 (permalink)
I don’t update EVGA website for one day and this slips through my fingers.... How do I need to queue up to get in line for the next available 3090 FTW3 ULTRA HYDRO ?
axtoxic
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2020/08/25 00:00:33
  • Status: offline
  • Ribbons : 0
回覆: Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:23:22 (permalink)
DaltonIQ
I don’t update EVGA website for one day and this slips through my fingers.... How do I need to queue up to get in line for the next available 3090 FTW3 ULTRA HYDRO ?

#58 from Jacob
Notify button will be back up when product is actively shipping, was limited initial batch shipping in early December. More on the way.
SeanDude05
Superclocked Member
  • Total Posts : 164
  • Reward points : 0
  • Joined: 2017/04/04 20:25:41
  • Location: USA
  • Status: offline
  • Ribbons : 1
Re: 回覆: Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:32:04 (permalink)
Got in on the queue for the FTW3 kit. I'm excited!
 
Will it need new thermal pads?


EVGA RTX 3080 FTW3 ULTRA + Hybrid Kit
transdogmifier
CLASSIFIED Member
  • Total Posts : 4574
  • Reward points : 0
  • Joined: 2003/09/05 14:26:21
  • Location: Boston, MA
  • Status: offline
  • Ribbons : 11
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 08:37:50 (permalink)

AMD Ryzen 5950x
Coolermaster ML360R RGB
Asus ROG Crosshair VIII Dark Hero
eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it)
eVGA 1600W Supernova T2 PSU
32GB Corsair Vengeance Pro 4000MHz (4x8GB)
Corsair MP600 2TB NVMe drive
Phanteks P500A Case
 
My Affiliate Code: 8ST3SZQYI7
My Associate Code: J4T7H4SOBIGFO8F
aberkae
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2008/12/16 07:05:54
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 12:21:06 (permalink)
I was here the nanosecond they posted this there was no notify button only coming soon. There is no reason for them stalling the notification button!


My rig:
Core i7 980 @4.3 ghz
Gtx 690
Corsair obsidian 800D case
ASUS  Rampage III extreme ROG 
Corsair Dominators: 6GB 2GHz, 7-8-7-20, 
Antec TPQ 1200 psu
corsair h50 cooling  
Crucial c300 256g sata 6gbits/s SSd  
screen asus vg278h 120hz 3 vision 2.0 monitor

  




Dabadger84
FTW Member
  • Total Posts : 1459
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 2
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 12:32:16 (permalink)
Ravena
Really want to know how long the tubing is cause every AIO i have or have seen are like an inch to an inch and a half too short to just bearly fit in most cases without it being top mounted




400mm per Jacob
 
Timerider42
Disappointed there's no hybrid option with a 140mm radiator. I wanted something to replace my 1080 hybrid. I can't fit another 240mm radiator into my case without (another) complete overhaul.




There's no way a 140mm radiator could keep this thing cooler most likely.  Even with a 240mm I anticipate them running a weebit warmer than any other previous Hybrid card... I hope I'm wrong, but we'll see whenever I get one & put it in Push/Pull with EK Vardars lol
 
SeanDude05
Got in on the queue for the FTW3 kit. I'm excited!
 
Will it need new thermal pads?


 
I've never bought the kit by itself before, but apparently they come with "everything you need" to install them, which must include pads etc.

Save up to 10% on eVGA.com purchases, use my Associates Code: 47AQQ6KPU2IZNXY
My system on ModRigs: https://www.modsrigs.com/detail.aspx?buildid=42454
System Specs (Brief Summary):
i9 9900k @ 5GHz - Gigabyte Z390 AORUS Master - eVGA 1200W P2 - 4x8GB G.Skill TridentZ @ 3600MHz CL16 1.35v (stock)
eVGA RTX 3090 FTW3 Ultra Hybrid - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor

ramshambo2001
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2020/10/17 23:22:06
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 15:47:21 (permalink)
Sorry if this was already asked before, but if we managed to get a notify for these cards, does that guarantee we are gonna get some of the first batch?
eg1122
Superclocked Member
  • Total Posts : 184
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 15:47:55 (permalink)
From my understanding, yes

CPU: Intel i9-10900K
Cooling: Corsair  iCue H150i RGB Pro XT 
Mother Board: MSI MEG Z490 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid 
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz 
SSDs(NVME): 1x WD Black SN750 1TB, 1x WD Black SN750 512Gb
SSDs(SATA): 1x Team Group 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor(Main): Asus Strix XG32VQ (144hz)
Monitor(2ndary): Dell S2715H (60hz)
OS: Windows 10 pro 64bit
ramshambo2001
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2020/10/17 23:22:06
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 and 3080 HYBRID/HC 2020/11/14 16:03:24 (permalink)
 OMG Sweet! Been waiting forever!
Page: < 12345.. > >> Showing page 5 of 60
Jump to:
  • Back to Mobile